SPEC® ACCEL™ OMP Result

Copyright 2015-2017 Standard Performance Evaluation Corporation

Intel

Intel Xeon E5-2697 v4

Endeavour Node(Intel Xeon E5-2697 v4, 2.3GHz,
DDR4-2400 MHz, SMT ON, Turbo ON)

SPECaccel_omp_base = 3.49

SPECaccel_omp_peak = 3.76

ACCEL license: 13 Test date: May-2017
Test sponsor: Intel Hardware Availability: Mar-2016
Tested by: Intel Software Availability: Apr-2017
Benchmark results graph
Hardware
CPU Name: Intel Xeon E5-2697 v4
CPU Characteristics: SMT is on, Turbo is on
CPU MHz: 2300
CPU MHz Maximum: 3600
FPU: Integrated
CPU(s) enabled: 36 cores, 2 chips, 18 cores/chip, 2 threads/core
CPU(s) orderable: 1,2 Chips
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 256 KB I+D on chip per core
L3 Cache: 45 MB I+D on chip per chip
Other Cache: None
Memory: 128 GB (8 x 16 GB 2Rx4 PC4-2400U-R)
Disk Subsystem: Panasas File System
Other Hardware: None
Accelerator
Accel Model Name: Intel Xeon E5-2697 v4
Accel Vendor: Intel
Accel Name: Intel Xeon E5-2697 v4
Type of Accel: CPU
Accel Connection: N/A
Does Accel Use ECC: yes
Accel Description: 2x Intel Xeon E5-2697 v4 CPUs with Hyper-Threading
Accel Driver: N/A
Software
Operating System: Red Hat Enterprise Linux Server release 7.3
(Maipo)
3.10.0-514.6.2.0.1.el7.x86_64.knl1
Compiler: C/C++/Fortran: Version 17.0.3.191 of Intel
Composer XE for Linux Build 20170404
File System: panfs
System State: Default
Other Software: FFTW 3.3.6

Results Table

Benchmark Base Peak
Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
503.postencil 74.0  1.47  71.3  1.53  72.0  1.51  74.0  1.47  71.3  1.53  72.0  1.51 
504.polbm 52.7  2.31  51.8  2.35  53.4  2.29  45.9  2.66  45.6  2.68  45.9  2.66 
514.pomriq 363    1.71  309    2.01  310    2.01  363    1.71  309    2.01  310    2.01 
550.pmd 92.6  2.60  93.1  2.59  92.8  2.60  85.0  2.84  84.6  2.85  85.1  2.83 
551.ppalm 232    2.34  230    2.36  228    2.39  107    5.09  105    5.16  107    5.08 
552.pep 94.1  2.46  94.4  2.45  94.3  2.45  87.8  2.63  87.9  2.63  86.3  2.68 
553.pclvrleaf 257    4.45  257    4.46  256    4.47  257    4.45  257    4.46  256    4.47 
554.pcg 61.9  5.38  61.6  5.41  62.1  5.37  60.0  5.55  59.6  5.58  60.1  5.55 
555.pseismic 133    2.13  130    2.17  131    2.16  133    2.13  130    2.17  131    2.16 
556.psp 81.5  10.0   85.3  9.59  80.3  10.2   81.5  10.0   85.3  9.59  80.3  10.2  
557.pcsp 83.4  10.3   83.0  10.4   82.5  10.4   83.4  10.3   83.0  10.4   82.5  10.4  
559.pmniGhost 126    3.14  126    3.14  125    3.17  126    3.14  126    3.14  125    3.17 
560.pilbdc 268    2.44  264    2.47  265    2.46  268    2.44  264    2.47  265    2.46 
563.pswim 76.4  2.08  74.8  2.13  75.2  2.11  76.4  2.08  74.8  2.13  75.2  2.11 
570.pbt 52.4  14.9   51.1  15.3   51.1  15.3   52.4  14.9   51.1  15.3   51.1  15.3  

Submit Notes

The config file option 'submit' was used.
submit = LD_PRELOAD=/opt/intel/compiler/2017u3/tbb/lib/intel64/gcc4.7/libtbbmalloc_proxy.so.2 $command
used Intel(R) TBB malloc

Platform Notes

 Sysinfo program
 /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit75_bdw/Docs/sysinfo
 $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35
 running on ebwnv03 Tue May 16 07:51:38 2017

 This section contains SUT (System Under Test) info as seen by
 some common utilities.  To remove or add to this section, see:
   http://www.spec.org/accel/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) CPU E5-2697 v4 @ 2.30GHz
       2 "physical id"s (chips)
       72 "processors"
    cores, siblings (Caution: counting these is hw and system dependent.  The
    following excerpts from /proc/cpuinfo might not be reliable.  Use with
    caution.)
       cpu cores : 18
       siblings  : 36
       physical 0: cores 0 1 2 3 4 8 9 10 11 16 17 18 19 20 24 25 26 27
       physical 1: cores 0 1 2 3 4 8 9 10 11 16 17 18 19 20 24 25 26 27
    cache size : 46080 KB

 From /proc/meminfo
    MemTotal:       131915832 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 From /etc/*release* /etc/*version*
    oracle-release: Oracle Linux Server release 7.3
    os-release:
       NAME="Oracle Linux Server"
       VERSION="7.3"
       ID="ol"
       VERSION_ID="7.3"
       PRETTY_NAME="Oracle Linux Server 7.3"
       ANSI_COLOR="0;31"
       CPE_NAME="cpe:/o:oracle:linux:7:3:server"
       HOME_URL="https://linux.oracle.com/"
    redhat-release: Red Hat Enterprise Linux Server release 7.3 (Maipo)
    ssf-release:
    SSF_VERSION=core-2016.0:hpc-cluster-2016.0:compat-base-2016.0:compat-hpc-2016.0
    system-release: Oracle Linux Server release 7.3
    system-release-cpe: cpe:/o:oracle:linux:7:3:server

 uname -a:
    Linux ebwnv03 3.10.0-514.6.2.0.1.el7.x86_64.knl1 #1 SMP Thu Mar 2 10:19:17
    MST 2017 x86_64 x86_64 x86_64 GNU/Linux

 run-level 3 May 15 15:09

 SPEC is set to: /panfs/projects/innl/abobyr/SpecACCEL_OMP/kits/kit75_bdw
    Filesystem             Type   Size  Used Avail Use% Mounted on
    panfs://36.101.211.31/ panfs  251T   69T  182T  28% /global/panfs01
 Additional information from dmidecode:

    Warning: Use caution when you interpret this section. The 'dmidecode' program
    reads system data which is "intended to allow hardware to be accurately
    determined", but the intent may not be met, as there are frequent changes to
    hardware, firmware, and the "DMTF SMBIOS" standard.


 (End of data from sysinfo program)

General Notes

Used Environment Variables:
  ENV_KMP_AFFINITY=compact,0 - assign OpenMP Threads continously
  ENV_OMP_NUM_THREADS=72 - limits number of Threads to be started to 72
  ENV_KMP_HW_SUBSET=2S,18C,2T - control Thread distribution accross sockets, cores and hw threads
  ENV_FORT_BUFFERED=true - enables buffered I/O for Fortran

Base Compiler Invocation

C benchmarks:

 icc 

Fortran benchmarks:

 ifort 

Benchmarks using both Fortran and C:

 icc   ifort 

Base Portability Flags

503.postencil:  -DSPEC_USE_INNER_SIMD 
504.polbm:  -DSPEC_USE_INNER_SIMD 
514.pomriq:  -DSPEC_USE_INNER_SIMD 
550.pmd:  -DSPEC_USE_INNER_SIMD   -80 
551.ppalm:  -DSPEC_USE_INNER_SIMD 
552.pep:  -DSPEC_USE_INNER_SIMD 
553.pclvrleaf:  -DSPEC_USE_INNER_SIMD 
554.pcg:  -DSPEC_USE_INNER_SIMD 
555.pseismic:  -DSPEC_USE_INNER_SIMD 
556.psp:  -DSPEC_USE_INNER_SIMD 
557.pcsp:  -DSPEC_USE_INNER_SIMD 
559.pmniGhost:  -DSPEC_USE_INNER_SIMD   -nofor-main 
560.pilbdc:  -DSPEC_USE_INNER_SIMD 
563.pswim:  -DSPEC_USE_INNER_SIMD 
570.pbt:  -DSPEC_USE_INNER_SIMD 

Base Optimization Flags

C benchmarks:

 -O3   -xCORE-AVX2   -qopenmp   -qopenmp-offload=host   -fimf-precision=low:sqrt,exp,log,/ 

Fortran benchmarks:

 -O3   -xCORE-AVX2   -qopenmp   -qopenmp-offload=host   -fimf-precision=low:sqrt,exp,log,/ 

Benchmarks using both Fortran and C:

 -O3   -xCORE-AVX2   -qopenmp   -qopenmp-offload=host   -fimf-precision=low:sqrt,exp,log,/ 

Peak Compiler Invocation

C benchmarks:

 icc 

Fortran benchmarks:

 ifort 

Benchmarks using both Fortran and C:

 icc   ifort 

Peak Portability Flags

503.postencil:  -DSPEC_USE_INNER_SIMD 
504.polbm:  -DSPEC_USE_INNER_SIMD 
514.pomriq:  -DSPEC_USE_INNER_SIMD 
550.pmd:  -DSPEC_USE_INNER_SIMD   -80 
551.ppalm:  -DSPEC_USE_INNER_SIMD   -DSPEC_HOST_FFTW3 
552.pep:  -DSPEC_USE_INNER_SIMD 
553.pclvrleaf:  -DSPEC_USE_INNER_SIMD 
554.pcg:  -DSPEC_USE_INNER_SIMD 
555.pseismic:  -DSPEC_USE_INNER_SIMD 
556.psp:  -DSPEC_USE_INNER_SIMD 
557.pcsp:  -DSPEC_USE_INNER_SIMD 
559.pmniGhost:  -DSPEC_USE_INNER_SIMD   -nofor-main 
560.pilbdc:  -DSPEC_USE_INNER_SIMD 
563.pswim:  -DSPEC_USE_INNER_SIMD 
570.pbt:  -DSPEC_USE_INNER_SIMD 

Peak Optimization Flags

C benchmarks:

503.postencil:  basepeak = yes 
504.polbm:  -O3   -xCORE-AVX2   -qopenmp   -qopenmp-offload=host   -fimf-precision=low:sqrt,exp,log,/ 
514.pomriq:  basepeak = yes 
552.pep:  -O3   -xCORE-AVX2   -qopenmp   -qopenmp-offload=host   -fimf-precision=low:sqrt,exp,log,/   -qopt-streaming-stores always 
554.pcg:  -O3   -xCORE-AVX2   -qopenmp   -qopenmp-offload=host   -fimf-precision=low:sqrt,exp,log,/   -qopt-prefetch=5 
557.pcsp:  basepeak = yes 
570.pbt:  basepeak = yes 

Fortran benchmarks:

550.pmd:  -O3   -xCORE-AVX2   -qopenmp   -qopenmp-offload=host   -fimf-precision=low:sqrt,exp,log,/   -qopt-prefetch=2 
551.ppalm:  -O3   -xCORE-AVX2   -qopenmp   -qopenmp-offload=host   -fimf-precision=low:sqrt,exp,log,/   -I/home/abobyr/FFTW-3.3.6/include   -L/home/abobyr/FFTW-3.3.6/lib 
555.pseismic:  basepeak = yes 
556.psp:  basepeak = yes 
560.pilbdc:  basepeak = yes 
563.pswim:  basepeak = yes 

Benchmarks using both Fortran and C:

553.pclvrleaf:  basepeak = yes 
559.pmniGhost:  basepeak = yes 

Peak Other Flags

Fortran benchmarks:

551.ppalm:  -lfftw3 

The flags file that was used to format this result can be browsed at
https://www.spec.org/accel/flags/Intel-icc17.0-linux64.html.

You can also download the XML flags source by saving the following link:
https://www.spec.org/accel/flags/Intel-icc17.0-linux64.xml.