SPEC(R) ACCEL(TM) OMP Summary Intel Intel Xeon Platinum 8480+ Intel Server D50DNP2MFALACB (2 x Intel Xeon Platinum 8480+, 2.0GHz, SMT ON, Turbo ON) Fri Jun 30 02:46:07 2023 ACCEL License: 13 Test date: Jun-2023 Test sponsor: Intel Hardware availability: Jan-2023 Tested by: Intel Software availability: Apr-2023 Base Base Base Peak Peak Peak Benchmarks Ref. Run Time Ratio Ref. Run Time Ratio -------------- ------ --------- --------- ------ --------- --------- 503.postencil 109 11.0 9.94 S 109 11.0 9.94 S 503.postencil 109 11.0 9.94 * 109 11.0 9.94 * 503.postencil 109 11.5 9.50 S 109 11.5 9.50 S 504.polbm 122 8.69 14.0 S 122 8.69 14.0 S 504.polbm 122 8.11 15.0 * 122 8.11 15.0 * 504.polbm 122 8.00 15.2 S 122 8.00 15.2 S 514.pomriq 621 58.3 10.7 S 621 58.3 10.7 S 514.pomriq 621 47.6 13.0 S 621 47.6 13.0 S 514.pomriq 621 47.7 13.0 * 621 47.7 13.0 * 550.pmd 241 13.3 18.1 * 241 13.0 18.5 S 550.pmd 241 15.6 15.5 S 241 12.9 18.6 * 550.pmd 241 11.7 20.6 S 241 12.6 19.1 S 551.ppalm 544 108 5.06 S 544 38.9 14.0 * 551.ppalm 544 107 5.07 S 544 38.5 14.1 S 551.ppalm 544 107 5.07 * 544 39.2 13.9 S 552.pep 231 19.4 11.9 S 231 19.4 11.9 S 552.pep 231 19.7 11.7 S 231 19.7 11.7 S 552.pep 231 19.5 11.8 * 231 19.5 11.8 * 553.pclvrleaf 1145 55.1 20.8 S 1145 54.0 21.2 S 553.pclvrleaf 1145 56.5 20.3 S 1145 53.9 21.3 * 553.pclvrleaf 1145 55.3 20.7 * 1145 53.5 21.4 S 554.pcg 333 26.8 12.4 S 333 24.5 13.6 S 554.pcg 333 25.6 13.0 S 333 24.7 13.5 * 554.pcg 333 25.7 12.9 * 333 25.0 13.3 S 555.pseismic 282 36.1 7.81 S 282 36.1 7.81 S 555.pseismic 282 37.0 7.63 * 282 37.0 7.63 * 555.pseismic 282 37.1 7.60 S 282 37.1 7.60 S 556.psp 818 17.9 45.6 S 818 17.9 45.6 S 556.psp 818 18.4 44.6 S 818 18.4 44.6 S 556.psp 818 18.1 45.3 * 818 18.1 45.3 * 557.pcsp 859 20.7 41.4 * 859 20.7 41.4 * 557.pcsp 859 21.3 40.2 S 859 21.3 40.2 S 557.pcsp 859 20.5 41.8 S 859 20.5 41.8 S 559.pmniGhost 397 54.1 7.34 S 397 48.3 8.21 * 559.pmniGhost 397 55.1 7.20 S 397 48.2 8.24 S 559.pmniGhost 397 54.8 7.24 * 397 48.4 8.20 S 560.pilbdc 653 62.6 10.4 * 653 56.4 11.6 S 560.pilbdc 653 62.3 10.5 S 653 55.3 11.8 * 560.pilbdc 653 62.6 10.4 S 653 55.2 11.8 S 563.pswim 159 8.61 18.5 * 159 8.61 18.5 * 563.pswim 159 8.51 18.7 S 159 8.51 18.7 S 563.pswim 159 8.68 18.3 S 159 8.68 18.3 S 570.pbt 780 16.6 46.9 S 780 14.3 54.5 S 570.pbt 780 17.0 45.9 * 780 14.4 54.1 * 570.pbt 780 17.0 45.8 S 780 14.5 53.9 S ============================================================================== 503.postencil 109 11.0 9.94 * 109 11.0 9.94 * 504.polbm 122 8.11 15.0 * 122 8.11 15.0 * 514.pomriq 621 47.7 13.0 * 621 47.7 13.0 * 550.pmd 241 13.3 18.1 * 241 12.9 18.6 * 551.ppalm 544 107 5.07 * 544 38.9 14.0 * 552.pep 231 19.5 11.8 * 231 19.5 11.8 * 553.pclvrleaf 1145 55.3 20.7 * 1145 53.9 21.3 * 554.pcg 333 25.7 12.9 * 333 24.7 13.5 * 555.pseismic 282 37.0 7.63 * 282 37.0 7.63 * 556.psp 818 18.1 45.3 * 818 18.1 45.3 * 557.pcsp 859 20.7 41.4 * 859 20.7 41.4 * 559.pmniGhost 397 54.8 7.24 * 397 48.3 8.21 * 560.pilbdc 653 62.6 10.4 * 653 55.3 11.8 * 563.pswim 159 8.61 18.5 * 159 8.61 18.5 * 570.pbt 780 17.0 45.9 * 780 14.4 54.1 * SPECaccel_omp_base 15.2 SPECaccel_omp_peak 16.8 HARDWARE -------- CPU Name: Intel Xeon Platinum 8480+ CPU Characteristics: Simultaneous multithreading (SMT) ON, Turbo ON CPU MHz: 2000 CPU MHz Maximum: 3800 FPU: Integrated CPU(s) enabled: 112 cores, 2 chips, 56 cores/chip, 2 threads/core CPU(s) orderable: 1, 2 chips Primary Cache: 32 KB I + 48 KB D on chip per core Secondary Cache: 2 MB I+D on chip per core L3 Cache: 105 MB I+D on chip per chip Other Cache: None Memory: 512 GB (16 x 32 GB 2Rx8 PC5-4800B) Disk Subsystem: 1 x 1 TB NVMe U.2 2.5" SSD Other Hardware: None ACCELERATOR ----------- Accel Model Name: Intel Xeon Platinum 8480+ Accel Vendor: Intel Accel Name: Intel Xeon Platinum 8480+ Type of Accel: CPU Accel Connection: N/A Does Accel Use ECC: yes Accel Description: Intel Xeon Platinum 8480+ SMT ON, Turbo ON Accel Driver: N/A SOFTWARE -------- Operating System: Rocky Linux 8.7 (Green Obsidian) Rocky Linux release 8.8 (Green Obsidian) 4.18.0-477.13.1.el8_8.x86_64 Compiler: Intel oneAPI Compiler 2023.1.0 File System: PANASAS FS System State: Run level 3 Other Software: FFTW 3.3.10 Submit Notes ------------ The config file option 'submit' was used. Platform Notes -------------- Sysinfo program /global/panfs02/innl/abobyr/SpecACCEL_OMP/kits/kit1.4_submission/Docs/sysinfo $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 running on eedq012 Fri Jun 30 00:46:13 2023 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/accel/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel Xeon Platinum 8480+ 2 "physical id"s (chips) 224 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 56 siblings : 112 physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 cache size : 107520 KB From /proc/meminfo MemTotal: 528079220 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* centos-release: Rocky Linux release 8.8 (Green Obsidian) os-release: NAME="Rocky Linux" VERSION="8.8 (Green Obsidian)" ID="rocky" ID_LIKE="rhel centos fedora" VERSION_ID="8.8" PLATFORM_ID="platform:el8" PRETTY_NAME="Rocky Linux 8.8 (Green Obsidian)" ANSI_COLOR="0;32" redhat-release: Rocky Linux release 8.8 (Green Obsidian) rocky-release: Rocky Linux release 8.8 (Green Obsidian) rocky-release-upstream: Derived from Red Hat Enterprise Linux 8.8 system-release: Rocky Linux release 8.8 (Green Obsidian) system-release-cpe: cpe:/o:rocky:rocky:8:GA uname -a: Linux eedq012 4.18.0-477.13.1.el8_8.x86_64 #1 SMP Tue May 30 22:15:39 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Jun 30 00:41 SPEC is set to: /global/panfs02/innl/abobyr/SpecACCEL_OMP/kits/kit1.4_submission Filesystem Type Size Used Avail Use% Mounted on panfs://36.101.212.1/innl panfs 269T 245T 25T 92% /global/panfs02/innl Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. (End of data from sysinfo program) General Notes ------------- The PANASAS filesystem as described on this result page was formerly generally available. At the time of this publication, it may not be shipping, and/or may not be supported, and/or may fail to meet other tests of General Availability described in the SPEC HPG Policy document, http://www.spec.org/hpg/policy.html Base Compiler Invocation ------------------------ C benchmarks: icc Fortran benchmarks: ifort Benchmarks using both Fortran and C: icc ifort Base Portability Flags ---------------------- 503.postencil: -DSPEC_USE_INNER_SIMD 504.polbm: -DSPEC_USE_INNER_SIMD 514.pomriq: -DSPEC_USE_INNER_SIMD 550.pmd: -DSPEC_USE_INNER_SIMD -80 551.ppalm: -DSPEC_USE_INNER_SIMD 552.pep: -DSPEC_USE_INNER_SIMD 553.pclvrleaf: -DSPEC_USE_INNER_SIMD 554.pcg: -DSPEC_USE_INNER_SIMD 555.pseismic: -DSPEC_USE_INNER_SIMD 556.psp: -DSPEC_USE_INNER_SIMD 557.pcsp: -DSPEC_USE_INNER_SIMD 559.pmniGhost: -DSPEC_USE_INNER_SIMD -nofor-main 560.pilbdc: -DSPEC_USE_INNER_SIMD 563.pswim: -DSPEC_USE_INNER_SIMD 570.pbt: -DSPEC_USE_INNER_SIMD Base Optimization Flags ----------------------- C benchmarks: -Ofast -xCORE-AVX512 -qopt-zmm-usage=high -no-prec-sqrt -qopenmp -qopenmp-offload=host -ipo -ansi-alias -qopt-multiple-gather-scatter-by-shuffles -fimf-precision=low:exp,sin,cos,sincos,log Fortran benchmarks: -Ofast -xCORE-AVX512 -qopt-zmm-usage=high -no-prec-sqrt -qopenmp -qopenmp-offload=host -ipo -ansi-alias -qopt-multiple-gather-scatter-by-shuffles -fimf-precision=low:exp,sin,cos,sincos,log Benchmarks using both Fortran and C: -Ofast -xCORE-AVX512 -qopt-zmm-usage=high -no-prec-sqrt -qopenmp -qopenmp-offload=host -ipo -ansi-alias -qopt-multiple-gather-scatter-by-shuffles -fimf-precision=low:exp,sin,cos,sincos,log Peak Compiler Invocation ------------------------ C benchmarks (except as noted below): icc 570.pbt: icx Fortran benchmarks: ifort Benchmarks using both Fortran and C: icc ifort Peak Portability Flags ---------------------- 503.postencil: -DSPEC_USE_INNER_SIMD 504.polbm: -DSPEC_USE_INNER_SIMD 514.pomriq: -DSPEC_USE_INNER_SIMD 550.pmd: -DSPEC_USE_INNER_SIMD -80 551.ppalm: -DSPEC_USE_INNER_SIMD -DSPEC_HOST_FFTW3 552.pep: -DSPEC_USE_INNER_SIMD 553.pclvrleaf: -DSPEC_USE_INNER_SIMD 554.pcg: -DSPEC_USE_INNER_SIMD 555.pseismic: -DSPEC_USE_INNER_SIMD 556.psp: -DSPEC_USE_INNER_SIMD 557.pcsp: -DSPEC_USE_INNER_SIMD 559.pmniGhost: -DSPEC_USE_INNER_SIMD -nofor-main 560.pilbdc: -DSPEC_USE_INNER_SIMD 563.pswim: -DSPEC_USE_INNER_SIMD 570.pbt: -DSPEC_USE_INNER_SIMD Peak Optimization Flags ----------------------- C benchmarks: 503.postencil: basepeak = yes 504.polbm: basepeak = yes 514.pomriq: basepeak = yes 552.pep: basepeak = yes 554.pcg: -Ofast -xCORE-AVX512 -qopt-zmm-usage=high -no-prec-sqrt -qopenmp -qopenmp-offload=host -ipo -ansi-alias -qopt-multiple-gather-scatter-by-shuffles -fimf-precision=low:exp,sin,cos,sincos,log 557.pcsp: basepeak = yes 570.pbt: -O3 -Ofast -xCORE-AVX512 -mprefer-vector-width=512 -qopt-multiple-gather-scatter-by-shuffles -fiopenmp -ffast-math -flto -funroll-loops -fimf-precision=low Fortran benchmarks: 550.pmd: -Ofast -xCORE-AVX512 -qopt-zmm-usage=high -no-prec-sqrt -qopenmp -qopenmp-offload=host -ipo -ansi-alias -qopt-multiple-gather-scatter-by-shuffles -fimf-precision=low:exp,sin,cos,sincos,log -fimf-precision=low -ip 551.ppalm: -Ofast -xCORE-AVX512 -qopt-zmm-usage=high -no-prec-sqrt -qopenmp -qopenmp-offload=host -ipo -ansi-alias -qopt-multiple-gather-scatter-by-shuffles -fimf-precision=low:exp,sin,cos,sincos,log -I/home/abobyr/FFTW-3.3.10/include -L/home/abobyr/FFTW-3.3.10/lib 555.pseismic: basepeak = yes 556.psp: basepeak = yes 560.pilbdc: -Ofast -xCORE-AVX512 -qopt-zmm-usage=high -no-prec-sqrt -qopenmp -qopenmp-offload=host -ipo -ansi-alias -qopt-multiple-gather-scatter-by-shuffles -fimf-precision=low:exp,sin,cos,sincos,log 563.pswim: basepeak = yes Benchmarks using both Fortran and C: -Ofast -xCORE-AVX512 -qopt-zmm-usage=high -no-prec-sqrt -qopenmp -qopenmp-offload=host -ipo -ansi-alias -qopt-multiple-gather-scatter-by-shuffles -fimf-precision=low:exp,sin,cos,sincos,log Peak Other Flags ---------------- Fortran benchmarks: 551.ppalm: -lfftw3 The flags file that was used to format this result can be browsed at https://www.spec.org/accel/flags/Intel-icc2021.2-linux64.20230726.html You can also download the XML flags source by saving the following link: https://www.spec.org/accel/flags/Intel-icc2021.2-linux64.20230726.xml SPEC and SPEC ACCEL are registered trademarks or trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ------------------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 2015-2023 Standard Performance Evaluation Corporation Tested with SPEC ACCEL v1.4. Report generated on Wed Aug 16 15:10:31 2023 by ACCEL ASCII formatter v1290. Originally published on 16 August 2023.