SPEC CINT2000 Summary SGI SGI Origin 300 16X 500MHz R14k Thu Dec 6 10:33:23 2001 SPEC License #4 Test date: Dec-2001 Hardware availability: Dec-2001 Tester: SGI Software availability: Nov-2001 Base Base Base Peak Peak Peak Benchmarks # Copies Run Time Rate # Copies Run Time Rate ------------ -------- -------- -------- -------- -------- -------- 164.gzip 16 518 50.2* 16 500 52.0* 164.gzip 16 519 50.1 16 500 52.0 164.gzip 16 517 50.3 16 498 52.1 175.vpr 16 379 68.6 16 352 73.9 175.vpr 16 376 69.1 16 353 73.5* 175.vpr 16 378 68.7* 16 354 73.4 176.gcc 16 311 65.6 16 309 66.2 176.gcc 16 311 65.7* 16 310 66.0 176.gcc 16 311 65.7 16 309 66.2* 181.mcf 16 630 53.0 16 630 53.0 181.mcf 16 646 51.7 16 646 51.7 181.mcf 16 641 52.1* 16 641 52.1* 186.crafty 16 250 74.4 16 248 74.8 186.crafty 16 250 74.3* 16 247 75.0* 186.crafty 16 250 74.1 16 246 75.4 197.parser 16 573 58.4* 16 550 60.7 197.parser 16 573 58.3 16 548 60.9 197.parser 16 572 58.4 16 549 60.9* 252.eon 16 298 81.0 16 280 86.1 252.eon 16 298 81.1* 16 280 86.3* 252.eon 16 297 81.2 16 280 86.3 253.perlbmk 16 604 55.3 16 602 55.5 253.perlbmk 16 605 55.3* 16 603 55.4 253.perlbmk 16 605 55.2 16 602 55.5* 254.gap 16 432 47.2* 16 429 47.5 254.gap 16 435 47.0 16 429 47.6* 254.gap 16 432 47.3 16 428 47.7 255.vortex 16 357 98.9 16 313 113 * 255.vortex 16 358 98.5 16 311 113 255.vortex 16 358 98.6* 16 313 113 256.bzip2 16 442 62.9 16 411 67.8 256.bzip2 16 441 63.1 16 408 68.2 256.bzip2 16 441 63.1* 16 409 68.1* 300.twolf 16 569 97.9* 16 569 97.9* 300.twolf 16 565 98.5 16 565 98.5 300.twolf 16 570 97.8 16 570 97.8 ======================================================================== 164.gzip 16 518 50.2* 16 500 52.0* 175.vpr 16 378 68.7* 16 353 73.5* 176.gcc 16 311 65.7* 16 309 66.2* 181.mcf 16 641 52.1* 16 641 52.1* 186.crafty 16 250 74.3* 16 247 75.0* 197.parser 16 573 58.4* 16 549 60.9* 252.eon 16 298 81.1* 16 280 86.3* 253.perlbmk 16 605 55.3* 16 602 55.5* 254.gap 16 432 47.2* 16 429 47.6* 255.vortex 16 358 98.6* 16 313 113 * 256.bzip2 16 441 63.1* 16 409 68.1* 300.twolf 16 569 97.9* 16 569 97.9* SPECint_rate_base2000 65.8 SPECint_rate2000 68.3 HARDWARE -------- Hardware Vendor: SGI Model Name: SGI Origin 300 16X 500MHz R14k CPU: R14000 CPU MHz: 500 FPU: Integrated CPU(s) enabled: 16 cores, 16 chips, 1 core/chip CPU(s) orderable: 2-32 Parallel: No Primary Cache: 32KBI + 32KBD on chip Secondary Cache: 2MB(I+D) off chip L3 Cache: N/A Other Cache: N/A Memory: 16 GB Disk Subsystem: 1 x 18 GB SCSI, 2 x 18 GB SCSI (striped) Other Hardware: None SOFTWARE -------- Operating System: IRIX 6.5.14f Compiler: MIPSpro 7.3.1.2m C, C++ SCSL 1.4 Math Library File System: xfs System State: Single-user NOTES ----- Baseline optimization flags (C and C++ use same flags): PASS1 : -Ofast=ip27 -IPA:use_intrinsic -fb_create /tmp/SPEC2000/FBDIR/base/$(EXEBASE) PASS2 : -Ofast=ip27 -IPA:use_intrinsic -fb_opt /tmp/SPEC2000/FBDIR/base/$(EXEBASE) Portability Flags: 176.gcc: -Dalloca=__builtin_alloca -DMIPS -DHOST_WORDS_BIG_ENDIAN 186.crafty: -DSGI 252.eon: -lm 253.perlbmk: -DSPEC_CPU2000_SGI -DI_FCNTL 254.gap: -DSYS_IS_USG -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_IOCTL_PROTO -DSYS_HAS_ANSI -DSYS_HAS_CALLOC_PROTO 300.twolf: -DHAVE_SIGNED_CHAR Peak optimization flags: note: all occurances of (FEEDBACK) below means compiled with a two-step process: PASS1 = -fb_create /tmp/SPEC2000/FBDIR_peak/$(EXEBASE) PASS2 = -fb_opt /tmp/SPEC2000/FBDIR_peak/$(EXEBASE) 164.gzip: -Ofast=ip27 -IPA:space=500:plimit=500 -lmalloc (FEEDBACK) 175.vpr: -Ofast=ip27 -IPA:space=300:plimit=10000:callee_limit=5000:linear=on . -LNO:prefetch_ahead=2 -INLINE:aggressive=on . -OPT:Olimit=0:alias=disjoint:alias=restrict -CG:ld_latency=10 -lmalloc (FEEDBACK) 181.mcf: basepeak=yes 176.gcc: -Ofast=ip27 -CG:ld_latency=4 (FEEDBACK) 186.crafty: -Ofast=ip27 -LNO:prefetch=0 -OPT:goto=off -CG:ld_latency=4 -lmalloc (FEEDBACK) 197.parser: -Ofast=ip27 -IPA:min_hot=14 (FEEDBACK) 252.eon: -Ofast=ip27 -LNO:prefetch=0 -LANG:exceptions=off -CG:ld_latency=4 -lmalloc -lm . (FEEDBACK) 253.perlbmk: -Ofast=ip27 -IPA:use_intrinsic -Wl,-x (FEEDBACK) 254.gap: -Ofast=ip27 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 . -OPT:alias=restrict:alias=disjoint -IPA:min_hot=7 -CG:ld_latency=8 -lmalloc (FEEDBACK) 255.vortex: -Ofast=ip27 -IPA:use_intrinsic . -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 -LNO:opt=0 -CG:ld_latency=5 . -IPA:min_hot=14 -TENV:X=4 -IPA:space=500:plimit=3600 -OPT:goto=off (FEEDBACK) 256.bzip2: -Ofast=ip27 -IPA:min_hot=5:space=500:plimit=2900 -INLINE:aggressive=on (FEEDBACK) 300.twolf: basepeak=yes The following O/S parameters were set: setenv PAGESIZE_DATA 4096 ; setenv PAGESIZE_TEXT 4096 ; setenv PAGESIZE_STACK 4096 systune -i ; percent_totalmem_4m_pages = 40 ; percent_totalmem_1m_pages = 7 systune -i ; percent_totalmem_256k_pages = 7 ; percent_totalmem_64k_pages = 7 systune -i ; r12k_bdiag = 0x4000000 ; limit stacksize 500000 The following is done before building each benchmark that requires (FEEDBACK): rm -rf /tmp/SPEC2000 ; mkdir /tmp/SPEC2000 ; cd /tmp/SPEC2000 ; mkdir FBDIR_base ; mkdir FBDIR_peak The first disk mentioned in the Disk Subsystem is the system disk. A striped XFS filesystem was created using the rest of the disks and the benchmark was run on this. Jobs are submitted using dplace. Contents of the placement file submit.pf: memories 1 in topology physical near $NODE threads 1 run thread 0 on memory 0 using cpu $CPU ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 1999-2004 Standard Performance Evaluation Corporation Generated on Fri Mar 25 16:02:04 2005 by SPEC CPU2000 ASCII formatter v2.1