# Invocation command line: # /benchmarks/cpu2000_v1.20/bin/runspec -c fp_rp7410_06.cfg --reportable --deletework -r -u 8 -n 3 fp ############################################################################ ext=rp7410_06 action=validate tune=base,peak input=ref teeout=yes feedback=1 output_format=asc makeflags = -j1 #################################################### # # Document the configuration being # tested. If it affects performance, it needs # to be described here. # #################################################### test_date=Jan-2002 prepared_by=Kirby Collins # hardware description # # dates should be of the form Mmm-yyyy # hw_cpu_mhz should be an integer (don't add MHz) # hw_model and machine_name should be the same hw_avail=Mar-2002 hw_model=hp server rp7410 machine_name=hp server rp7410 hw_cpu=PA-8700 hw_cpu_mhz=750 hw_pcache=0.75MB(I) + 1.5MB(D) on chip hw_scache=None hw_tcache=None hw_ocache=None hw_fpu=Integrated hw_ncpu=8 hw_ncpuorder=2 to 8 by 2 hw_parallel=No hw_memory=16GB (32x512MB DIMMs) hw_disk=2x18 GB SCSI # operating system section # this should document the software used for the run. # the compiler revision notes are in the main .cfg file along # with the options. # # note that the sw_avail date should be the date when # all the software components, including compilers, # are available sw_os=HP-UX 11i TCOE B.11.11.0203 sw_file=VxFS sw_state=Multi-user sw_avail=Mar-2002 # special notes # this should include any special notes on the hardware configuration, # software configuration, etc. notes900 = notes901 = Hardware configuration notes: notes902 = notes903 = System was configured as a single partition with 2 cells notes904 = firmware tunable DataPrefetch enabled (default) notes905 = notes950 = Operating system configuration notes: notes951 = notes952 = vps_pagesize 4096, vps_ceiling 16384 notes953 = maxdsiz 0x80000000, maxssiz 0x10000000 notes954 = maxdsiz_64bit 0x400000000, maxssiz_64bit 0x40000000 notes955 = # vendor stuff (this shouldn't change often, if ever) hw_vendor=Hewlett Packard Corporation company_name=Hewlett Packard Corporation license_num=3 tester_name=HP ############################################ # # compiler revision notes # # be sure to document compiler availability # date in system.inc include file (if later # than the OS availability) # ############################################ sw_compiler000=HP ANSI C 11.11.04 sw_compiler001=Fortran90 11.11.48 sw_compiler002=PHSS_24207 libm patch ########end of header section################ ######################################################################## # Benchmark specific portability flags. # ######################################################################## notes100 = notes101 = Portability flags: 178.galgel=default=default=default: notes102 = 178.galgel: +source=fixed FPORTABILITY = +source=fixed ##################################################################### # compilers and options for BASE ##################################################################### default=base=default=default: FC = /opt/fortran90/bin/f90 CC = /opt/ansic/bin/cc notes200 = notes201 = Baseline compile flags: FOPTIMIZE = +O3 +Onofltacc -Wl,-a,archive -Wl,+FPD notes210 = fortran: +O3 +Onofltacc -Wl,-a,archive -Wl,+FPD PASS1_CFLAGS = +I PASS1_LDCFLAGS = $(PASS1_CFLAGS) PASS2_CFLAGS = +P PASS2_LDCFLAGS = $(PASS2_CFLAGS) COPTIMIZE = +O4 +Odataprefetch -Wl,-a,archive notes220 = C : +I/+P +O4 +Odataprefetch -Wl,-a,archive ##################################################################### # compilers for PEAK (options are in benchmark specific sections) ##################################################################### default=peak=default=default: CC = /opt/ansic/bin/cc FC = /opt/fortran90/bin/f90 F77 = /opt/fortran90/bin/f90 notes300 = notes301 = Peak compile flags: 168.wupwise=peak=default=default: ONESTEP = true F77OPTIMIZE = +cat +O3 +Odataprefetch +Onofltacc -Wl,+FPD -Wl,-a,archive notes310 = 168.wupwise: (ONESTEP) +cat +O3 +Odataprefetch +Onofltacc notes311 = -Wl,+FPD -Wl,-a,archive 171.swim=peak=default=default: basepeak=true notes320 = 171.swim: basepeak=true 172.mgrid=peak=default=default: basepeak=true notes330 = 172.mgrid: basepeak=true 173.applu=peak=default=default: basepeak=true notes340 = 173.applu: basepeak=true 177.mesa=peak=default=default: basepeak=true notes350 = 177.mesa: basepeak=true 178.galgel=peak=default=default: basepeak=true notes360 = 178.galgel: basepeak=true 179.art=peak=default=default: PASS1_CFLAGS = +I PASS1_LDCFLAGS = $(PASS1_CFLAGS) PASS2_CFLAGS = +P PASS2_LDCFLAGS = $(PASS2_CFLAGS) COPTIMIZE = +Oall +Onodataprefetch +Onofltacc +Optrs_strongly_typed +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive notes370 = 179.art: +I/+P +Oall +Onodataprefetch +Onofltacc +Optrs_strongly_typed notes371 = +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive 183.equake=peak=default=default: COPTIMIZE = +O4 +Olibcalls +Odataprefetch +Optrs_strongly_typed +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive notes380 = 183.equake: +O4 +Olibcalls +Odataprefetch +Optrs_strongly_typed notes381 = +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive 187.facerec=peak=default=default: ONESTEP = true FOPTIMIZE = +cat +O3 +Ofastaccess -Wl,+FPD -Wl,-a,archive notes390 = 187.facerec: (ONESTEP) +cat +O3 +Ofastaccess -Wl,+FPD -Wl,-a,archive 188.ammp=peak=default=default: PASS1_CFLAGS = +I PASS1_LDCFLAGS = $(PASS1_CFLAGS) PASS2_CFLAGS = +P PASS2_LDCFLAGS = $(PASS2_CFLAGS) COPTIMIZE = +Oall +Odataprefetch +Optrs_strongly_typed +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive notes400 = 188.ammp: +I/+P +Oall +Odataprefetch +Optrs_strongly_typed notes401 = +Opromote_indirect_calls -Wl,+FPD -Wl,-a,archive 189.lucas=peak=default=default: FOPTIMIZE = +O3 +Onoinline -Wl,+FPD -Wl,-a,archive notes410 = 189.lucas: +O3 +Onoinline -Wl,+FPD -Wl,-a,archive 191.fma3d=peak=default=default: FOPTIMIZE = +O3 +Onolimit -Wl,+FPD -Wl,-a,archive notes420 = 191.fma3d: +O3 +Onolimit -Wl,+FPD -Wl,-a,archive 200.sixtrack=peak=default=default: ONESTEP = true F77OPTIMIZE = +cat +O3 +Onolibcalls +Onolimit +Onoinline +Onodataprefetch -Wl,+FPD -Wl,-a,archive notes430 = 200.sixtrack: (ONESTEP) +cat +O3 +Onolibcalls +Onolimit +Onoinline notes431 = +Onodataprefetch -Wl,+FPD -Wl,-a,archive 301.apsi=peak=default=default: basepeak=true notes440 = 301.apsi: basepeak=true