SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
SGI
SGI Origin 3800 64X 600MHz R14k
SPECint_rate2000 = 362    
SPECint_rate_base2000 = 350    
SPEC license # 4 Tested by: SGI Test date: Feb-2002 Hardware Avail: Jan-2002 Software Avail: Nov-2001
Graph Scale Benchmark Base
Copies
Base
Runtime
Base
Ratio
Copies Runtime Ratio
164.gzip base result bar (236)
164.gzip peak result bar (243)
164.gzip 64 440    236     64 428    243    
175.vpr base result bar (412)
175.vpr peak result bar (436)
175.vpr 64 252    412     64 238    436    
176.gcc base result bar (325)
176.gcc peak result bar (324)
176.gcc 64 251    325     64 252    324    
181.mcf base result bar (549)
181.mcf peak result bar (549)
181.mcf 64 244    549     64 244    549    
186.crafty base result bar (370)
186.crafty peak result bar (359)
186.crafty 64 201    370     64 207    359    
197.parser base result bar (297)
197.parser peak result bar (314)
197.parser 64 450    297     64 425    314    
252.eon base result bar (375)
252.eon peak result bar (407)
252.eon 64 258    375     64 237    407    
253.perlbmk base result bar (270)
253.perlbmk peak result bar (269)
253.perlbmk 64 496    270     64 496    269    
254.gap base result bar (214)
254.gap peak result bar (220)
254.gap 64 381    214     64 372    220    
255.vortex base result bar (490)
255.vortex peak result bar (550)
255.vortex 64 288    490     64 256    550    
256.bzip2 base result bar (360)
256.bzip2 peak result bar (383)
256.bzip2 64 309    360     64 291    383    
300.twolf base result bar (470)
300.twolf peak result bar (470)
300.twolf 64 474    470     64 474    470    
  SPECint_rate_base2000 350      
  SPECint_rate2000 362    

Hardware
Hardware Vendor: SGI
Model Name: SGI Origin 3800 64X 600MHz R14k
CPU: R14000
CPU MHz: 600
FPU: Integrated
CPU(s) enabled: 64 cores, 64 chips, 1 core/chip
CPU(s) orderable: 4-512
Parallel: No
Primary Cache: 32KBI + 32KBD on chip
Secondary Cache: 8MB(I+D) off chip
L3 Cache: N/A
Other Cache: N/A
Memory: 64 GB
Disk Subsystem: 1 x 18 GB FC, 4 x 18 GB FC (striped)
Other Hardware: None
Software
Operating System: IRIX 6.5.14m
Compiler: MIPSpro 7.3.1.3m C, C++
SCSL 1.4 Math Library
File System: xfs
System State: Single-user
Notes / Tuning Information
Baseline optimization flags (C and C++ use same flags):
   PASS1 : -Ofast=ip35 -IPA:use_intrinsic -fb_create /tmp/SPEC2000/FBDIR/base/$(EXEBASE) 
   PASS2 : -Ofast=ip35 -IPA:use_intrinsic -fb_opt /tmp/SPEC2000/FBDIR/base/$(EXEBASE) 
 Portability Flags:
   176.gcc: -Dalloca=__builtin_alloca -DMIPS -DHOST_WORDS_BIG_ENDIAN
   186.crafty: -DSGI
   253.perlbmk: -DSPEC_CPU2000_SGI -DI_FCNTL
   252.eon: -lm 
   254.gap: -DSYS_IS_USG -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_IOCTL_PROTO
            -DSYS_HAS_ANSI -DSYS_HAS_CALLOC_PROTO
   300.twolf: -DHAVE_SIGNED_CHAR
Peak optimization flags:
note:  all occurances of (FEEDBACK) below means compiled with a two-step process: 
   PASS1 = -fb_create /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
   PASS2 = -fb_opt /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
 164.gzip: -Ofast=ip35 -IPA:space=500:plimit=500 -lmalloc (FEEDBACK)
 175.vpr: -Ofast=ip35 -IPA:space=300:plimit=10000:callee_limit=5000:linear=on 
 .        -LNO:prefetch_ahead=2 -INLINE:aggressive=on 
 .        -OPT:Olimit=0:alias=disjoint:alias=restrict -CG:ld_latency=10 -lmalloc (FEEDBACK)
 181.mcf: basepeak=yes
 176.gcc: -Ofast=ip35 -CG:ld_latency=4 (FEEDBACK)
 186.crafty: -Ofast=ip35 -LNO:prefetch=0 -OPT:goto=off -CG:ld_latency=4 -lmalloc (FEEDBACK)
 197.parser: -Ofast=ip35 -IPA:min_hot=14 (FEEDBACK)
 252.eon: -Ofast=ip35 -LNO:prefetch=0 -LANG:exceptions=off -CG:ld_latency=4 -lmalloc -lm 
 .        (FEEDBACK)
 253.perlbmk: -Ofast=ip35 -IPA:use_intrinsic -Wl,-x (FEEDBACK)
 254.gap: -Ofast=ip35 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4
 . -OPT:alias=restrict:alias=disjoint -IPA:min_hot=7 -CG:ld_latency=8 -lmalloc (FEEDBACK)
 255.vortex: -Ofast=ip35 -IPA:use_intrinsic 
 .           -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 -LNO:opt=0 -CG:ld_latency=5 
 .           -IPA:min_hot=14 -TENV:X=4 -IPA:space=500:plimit=3600 -OPT:goto=off (FEEDBACK)
 256.bzip2: -Ofast=ip35 -IPA:min_hot=5:space=500:plimit=2900 -INLINE:aggressive=on (FEEDBACK)
 300.twolf: basepeak=yes
 The following O/S parameters were set:
   setenv PAGESIZE_DATA 4096 ; setenv PAGESIZE_TEXT 4096 ; setenv PAGESIZE_STACK 4096 
   systune -i ; percent_totalmem_4m_pages = 40 ; percent_totalmem_1m_pages = 7 
   systune -i ; percent_totalmem_256k_pages = 7 ; percent_totalmem_64k_pages = 7 
   systune -i ; r12k_bdiag = 0x4000000 
   limit stacksize 500000
 The following is done before building each benchmark that requires (FEEDBACK):  
 rm -rf /tmp/SPEC2000/FBDIR_peak/$baseexe ; mkdir -p /tmp/SPEC2000/FBDIR_peak/$baseexe 
 Jobs are submitted using dplace. Contents of the placement file submit.pf:   
 memories 1 in topology physical near $NODE
 threads 1
 run thread 0 on memory 0 using cpu $CPU
 The first disk mentioned in the Disk Subsystem is the system disk. A striped   
 XFS filesystem was created using the rest of the disks and the benchmark was  
 run on this.


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 26-Feb-2002

Generated on Fri Mar 25 16:02:10 2005 by SPEC CPU2000 HTML formatter v1.01