# Invocation command line: # /usr/spec2000/bin/runspec -a validate -T all -v 6 -s -n 3 -c /tmp/specdriver-4766.tmp7 fp ############################################################################ ################################################################################ # SPEC CPU2000 Benchmark Config file IBM eServer pSeries AIX 5.1 # Last Changed: 2.21.02 ################################################################################ #=============================================================================== # Global Options apply to all runs #=============================================================================== VENDOR = ibm action = validate tune = all output_format = asc runout = yes teeout = yes ext = conle51.f711.cppv6b basepeak=0 #--number of times each test will be run (reportable must be and odd num >= 3) iterations = 3 mean_anyway = 1 #--turn on both of the following for reportable (non-test) runs reportable = 1 check_md5 = 1 #--prevent log file lines that are too long for vi log_line_width = 156 #--the directory where pdf data will go, be sure to tell the compiler #---where this is (eg: export PDFDIR=/tmp/pdfdir for IBM compilers) PDFDIR=/tmp/pdfdir #=============================================================================== #=============================================================================== company_name = IBM Corporation machine_name = hw_vendor = IBM Corporation hw_model = IBM eServer pSeries 660 Model 6M1 (750 MHz) hw_cpu = RS64 III hw_cpu_mhz = 750 hw_fpu = Integrated hw_ncpu = 1 hw_ncpuorder = 2,4,6,8way hw_pcache = 64KBI+64KBD (on chip) hw_scache = 4MB unified (off chip) hw_tcache = None hw_ocache = None hw_parallel = No hw_memory = 2GB hw_disk = 1x9.1GB, 1x4.3GB Fast SCSI hw_other = None hw_avail = Sept-2001 sw_os = AIX 5.1 sw_file = AIX/JFS sw_state = Multi-user sw_avail = August-2001 license_num = 11 tester_name = IBM Corp. test_date = July-2001 #--------------------------------- # Floating point specific notes #--------------------------------- fp=default=default=default: sw_compiler01 = Fortran 77 and 90: IBM xl Fortran 7.1.1.0 invoked sw_compiler02 = as xlf90. sw_compiler03 = C: IBM VAC++ for AIX 6.0 BETA invoked as xlc notes010 = Portability Flags notes020 = -qfixed used in: wupwise, swim, mgrid, applu, galgel, sixtrack, apsi notes030 = -qsuffix=f=f90 used in: galgel, facerec, lucas, fma3d notes040 = Base Flags: notes050 = Fortran: -O5 -lmass notes060 = C: -O5 -lmass notes070 = Peak Flags: notes080 = 168.wupwise: F77=xlf90 -O3 -qarch=pwr3 -qtune=pwr3 notes085 = -qipa=level=2 -lmass notes090 = 171.swim: basepeak=1 notes100 = 172.mgrid: -O5 -qarch=ppc -qtune=pwr3 -lmass -qfdpr, notes105 = fdpr -v -R3 notes110 = 173.applu: -qpdf1/pdf2 -O3 -lmass notes112 = -qipa=level=2:partition=large -qfdpr, notes114 = fdpr -v -R3 notes120 = 177.mesa: basepeak=1 notes130 = 178.galgel: basepeak=1 notes140 = 179.art: basepeak=1 notes150 = 183.equake: -O5 -lmass -lhmu notes160 = 187.facerec: -O5 -qarch=pwr3 -lmass -qfdpr, fdpr -v -R3 notes170 = 188.ammp: -O5 -qarch=pwr3 -qipa=partition=large notes180 -qalign=natural -lmass notes180 = 189.lucas: -O3 -lmass -lhmu notes190 = 191.fma3d: -O3 -lmass -lhmu notes200 = 200.sixtrack:-O3 -qarch=rs64c notes210 = 301.apsi: -qpdf1/pdf2 -O4 -qarch=ppc -qtune=pwr3 notes220 -lmass -qfdpr, fdpr -v -R3 notes300 = fdpr: Feedback directed program restructuring tool notes310 = /usr/spec2000 filesystem mounted with no JFS log file I/O notes320 = APAR IY22854 was applied to AIX 5L V5.1 to enable new hardware notes325 support notes330 = ulimits set to unlimited. #--------------------------------- # Integer specific notes #--------------------------------- int=default=default=default: sw_compiler01 = C: IBM VAC for AIX 6.0 BETA invoked as cc except where noted sw_compiler02 = as xlc sw_compiler03 = C++: IBM VAC++ for AIX 6.0 BETA invoked as xlC notes010 = Portability Flags: notes020 = gcc: -ma -qlanglvl=ansi -DHOST_WORDS_BIG_ENDIAN notes030 = crafty: -DAIX notes040 = eon: -DNEED_EXPLICIT_SPECIALIZATION notes050 = perlbmk: -DSPEC_CPU2000_AIX notes060 = gap: -DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO -DSYS_HAS_MALLOC_PROTO notes070 = -DSYS_HAS_CALLOC_PROTO notes080 = twolf: -DHAVE_SIGNED_CHAR notes090 = Base Flags: notes100 = C: -O4 notes110 = C++: -qpdf1/pdf2 -O3 qarch=ppc qtune=rs64b notes120 = Peak Flags: notes130 = 164.gzip: CC=/usr/vac/bin/xlc -O5 -qarch=ppc -qfdpr, notes135 fdpr -v -R3 notes140 = 175.vpr: basepeak=1 notes160 = 176.gcc: basepeak=1 notes170 = 181.mcf: basepeak=1 #notes170 = 181.mcf: -O5 -lhmu -qipa=partition=large -qfdpr, #notes175 = fdpr -v -R3 notes180 = 186.crafty: -O4 -lhmu -q64 -qfdpr, fdpr -v -R3 notes190 = 197.parser: -qpdf1/pdf2 CC=/usr/vac/bin/xlc -O4 notes192 = -qarch=rs64b -L/usr/vac/lib -bnso notes194 = -bI:/lib/syscalls.exp -qfdpr, fdpr -v -R3 notes210 = 252.eon: -qpdf1/pdf2 -O3 -qarch=ppc -qtune=rs64b notes215 = -L/usr/vac/lib -qfdpr, fdpr -v -R3 notes220 = 253.perlbmk: -qpdf1/pdf2 -O3 -qarch=rs64b -lhmu -qdatalocal notes225 = -qunroll=8 -L/usr/vac/lib notes240 = 254.gap: -O4 -qarch=rs64b -qfdpr, fdpr -v -R3 notes250 = 255.vortex: -O5 -lhmu -qipa=partition=large -qfdpr, notes255 = fdpr -v -R2 notes260 = 256.bzip2: -O5 -lhmu -qfdpr, fdpr -v -R3 notes270 = 300.twolf: CC=/usr/vac/bin/xlc -qpdf1/pdf2 -O5 notes275 = -L/usr/vac/lib -qfdpr, fdpr -v -R3 notes300 = fdpr: Feedback directed program restructuring tool notes310 = APAR IY22854 was applied to AIX 5L V5.1 to enable new hardware notes320 support notes330 = ulimits set to unlimited. ################################################################################ ################################################################################ ###### ###### ###### DO NOT EDIT BELOW THIS BLOCK ###### ###### (unless you are prepared to build new binaries) ###### ###### ###### ################################################################################ ################################################################################ #=============================================================================== # How the compilers are called # The settings used here are for IBM C/C++ and xl Fortran compilers #=============================================================================== fp=default=default=default: CC = /usr/vacpp/bin/xlc FC = xlf90 F77 = xlf90 int=default=default=default: CC = /usr/vacpp/bin/cc CXX = /usr/vacpp/bin/xlC #=============================================================================== # Base Level Optimizations # Limited to 4 flags #=============================================================================== #------------------------ # Floating Point #------------------------ fp=base=default=default: FOPTIMIZE =-O5 -lmass COPTIMIZE =-O5 -lmass #------------------------ # Integer #------------------------ int=base=default=default: COPTIMIZE =-O4 PASS1_CXXFLAGS =-qpdf1 -O3 -qarch=ppc -qtune=rs64b PASS1_LDCXXFLAGS =-qpdf1 -L/usr/vac/lib PASS2_CXXFLAGS =-qpdf2 -O3 -qarch=ppc -qtune=rs64b PASS2_LDCXXFLAGS =-qpdf2 252.eon=base=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} #=============================================================================== # Floating Point Portability Flags # no optimizations allowed here #=============================================================================== 168.wupwise=default=default=default: EXTRA_FFLAGS=-qfixed 171.swim=default=default=default: EXTRA_FFLAGS=-qfixed 172.mgrid=default=default=default: EXTRA_FFLAGS=-qfixed 173.applu=default=default=default: EXTRA_FFLAGS=-qfixed 178.galgel=default=default=default: EXTRA_FFLAGS=-qfixed -qsuffix=f=f90 187.facerec=default=default=default: EXTRA_FFLAGS=-qsuffix=f=f90 189.lucas=default=default=default: EXTRA_FFLAGS=-qsuffix=f=f90 191.fma3d=default=default=default: EXTRA_FFLAGS= -qsuffix=f=f90 200.sixtrack=default=default=default: EXTRA_FFLAGS=-qfixed 301.apsi=default=default=default: EXTRA_FFLAGS=-qfixed #=============================================================================== # Integer Portability Flags # no optimizations allowed here #=============================================================================== 176.gcc=default=default=default: EXTRA_CFLAGS=-ma -qlanglvl=ansi -DHOST_WORDS_BIG_ENDIAN 186.crafty=default=default=default: EXTRA_CFLAGS=-DAIX 252.eon=default=default=default: EXTRA_CXXFLAGS=-DNEED_EXPLICIT_SPECIALIZATION EXTRA_LDFLAGS=-I. -DNDEBUG 253.perlbmk=default=default=default: EXTRA_CFLAGS=-DSPEC_CPU2000_AIX 254.gap=default=default=default: EXTRA_CFLAGS=-DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO -DSYS_HAS_MALLOC_PROTO -DSYS_HAS_CALLOC_PROTO 300.twolf=default=default=default: EXTRA_CFLAGS=-DHAVE_SIGNED_CHAR #=============================================================================== # Integer peak optimization flags #=============================================================================== 164.gzip=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} CC=/usr/vac/bin/xlc COPTIMIZE=-O5 -qarch=ppc -qfdpr fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 175.vpr=peak=default=default: basepeak=1 176.gcc=peak=default=default: basepeak=1 181.mcf=peak=default=default: basepeak=1 186.crafty=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} COPTIMIZE=-O4 -lhmu -q64 -qfdpr fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 197.parser=peak=default=default: CC=/usr/vac/bin/xlc fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CFLAGS=-qpdf1 -O4 -qarch=rs64b -qfdpr PASS1_LDFLAGS=-O4 -lpdf -L/usr/vac/lib -bnso -bI:/lib/syscalls.exp -qfdpr PASS2_CFLAGS=-qpdf2 -O4 -qarch=rs64b -qfdpr PASS2_LDFLAGS=-O4 -bnso -bI:/lib/syscalls.exp -qfdpr fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 252.eon=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CXXFLAGS =-qpdf1 -O3 -qarch=ppc -qtune=rs64b -qfdpr PASS1_LDCXXFLAGS =-qpdf1 -L/usr/vac/lib -qfdpr PASS2_CXXFLAGS =-qpdf2 -O3 -qarch=ppc -qtune=rs64b -qfdpr PASS2_LDCXXFLAGS = -qpdf2 -qfdpr fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 253.perlbmk=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CFLAGS =-qpdf1 -O3 -qarch=rs64b -qdatalocal -qunroll=8 PASS1_LDCFLAGS =-lhmu -lpdf -L/usr/vac/lib PASS2_CFLAGS =-qpdf2 -O3 -qarch=rs64b -qdatalocal -qunroll=8 PASS2_LDCFLAGS =-lhmu 254.gap=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} COPTIMIZE=-O4 -qarch=rs64b -qfdpr fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 255.vortex=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} COPTIMIZE=-O5 -lhmu -qipa=partition=large -qfdpr fdo_run1 = fdpr -v -R2 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 256.bzip2=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} COPTIMIZE=-O5 -lhmu -qfdpr fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 300.twolf=peak=default=default: CC=/usr/vac/bin/xlc fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_FLAGS=-qpdf1 -O5 -qfdpr PASS1_LDFLAGS=-O5 -L/usr/vac/lib -lpdf -qfdpr PASS2_FLAGS=-qpdf2 -O5 -qfdpr PASS2_LDFLAGS=-O5 -qfdpr fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe #=============================================================================== # Floating Point peak optimization flags #=============================================================================== default=peak=default=default: EXTRA_F77FLAGS =-qfixed 168.wupwise=peak=default=default: F77 = xlf90 F77OPTIMIZE =-O3 -qarch=pwr3 -qtune=pwr3 -qipa=level=2 -lmass 171.swim=peak=default=default: basepeak = 1 172.mgrid=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} F77OPTIMIZE =-O5 -qarch=ppc -qtune=pwr3 -lmass -qfdpr fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 173.applu=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_F77FLAGS =-qpdf1 -O3 -lmass -qipa=level=2:partition=large -qfdpr PASS1_LDF77FLAGS =-O3 -lmass -qipa=level=2:partition=large -qfdpr -qpdf1 -L/usr/lpp/xlf/lib/pdf PASS2_F77FLAGS =-qpdf2 -O3 -lmass -qipa=level=2:partition=large -qfdpr PASS2_LDF77FLAGS =-O3 -lmass -qipa=level=2:partition=large -qpdf2 -qfdpr fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 177.mesa=peak=default=default: basepeak=1 178.galgel=peak=default=default: basepeak=1 179.art=peak=default=default: basepeak=1 183.equake=peak=default=default: COPTIMIZE =-O5 -lmass -lhmu 187.facerec=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} FOPTIMIZE =-O5 -qarch=pwr3 -lmass -qfdpr fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 188.ammp=peak=default=default: COPTIMIZE =-O5 -qarch=pwr3 -qipa=partition=large -qalign=natural -lmass 189.lucas=peak=default=default: FOPTIMIZE =-O3 -lmass -lhmu 191.fma3d=peak=default=default: FOPTIMIZE =-O3 -lmass -lhmu 200.sixtrack=peak=default=default: F77OPTIMIZE =-O3 -qarch=rs64c 301.apsi=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_F77FLAGS =-qpdf1 -O4 -qarch=ppc -qtune=pwr3 -lmass -qfdpr PASS1_LDF77FLAGS =-O4 -qarch=ppc -qtune=pwr3 -lmass -qfdpr -lpdf -L/usr/lpp/xlf/lib/pdf PASS2_F77FLAGS =-qpdf2 -O4 -qarch=ppc -qtune=pwr3 -lmass -qfdpr PASS2_LDF77FLAGS =-O4 -qarch=ppc -qtune=pwr3 -lmass -qfdpr fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe