SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
SGI
SGI Origin 300 8X 600MHz R14000A
SPECint_rate2000 = 43.3  
SPECint_rate_base2000 = 41.9  
SPEC license # 4 Tested by: SGI Test date: Apr-2002 Hardware Avail: May-2002 Software Avail: Apr-2002
Graph Scale Benchmark Base
Copies
Base
Runtime
Base
Ratio
Copies Runtime Ratio
164.gzip base result bar (29.7)
164.gzip peak result bar (30.7)
164.gzip 8 437    29.7   8 423    30.7  
175.vpr base result bar (46.8)
175.vpr peak result bar (50.0)
175.vpr 8 277    46.8   8 260    50.0  
176.gcc base result bar (39.4)
176.gcc peak result bar (39.2)
176.gcc 8 259    39.4   8 260    39.2  
181.mcf base result bar (49.2)
181.mcf peak result bar (49.2)
181.mcf 8 340    49.2   8 340    49.2  
186.crafty base result bar (45.5)
186.crafty peak result bar (44.4)
186.crafty 8 204    45.5   8 209    44.4  
197.parser base result bar (37.3)
197.parser peak result bar (39.2)
197.parser 8 448    37.3   8 426    39.2  
252.eon base result bar (46.1)
252.eon peak result bar (50.4)
252.eon 8 261    46.1   8 239    50.4  
253.perlbmk base result bar (33.6)
253.perlbmk peak result bar (33.7)
253.perlbmk 8 497    33.6   8 496    33.7  
254.gap base result bar (26.8)
254.gap peak result bar (27.5)
254.gap 8 381    26.8   8 372    27.5  
255.vortex base result bar (60.4)
255.vortex peak result bar (67.8)
255.vortex 8 292    60.4   8 260    67.8  
256.bzip2 base result bar (42.9)
256.bzip2 peak result bar (45.4)
256.bzip2 8 324    42.9   8 307    45.4  
300.twolf base result bar (58.9)
300.twolf peak result bar (58.9)
300.twolf 8 473    58.9   8 473    58.9  
  SPECint_rate_base2000 41.9    
  SPECint_rate2000 43.3  

Hardware
Hardware Vendor: SGI
Model Name: SGI Origin 300 8X 600MHz R14000A
CPU: R14000A
CPU MHz: 600
FPU: Integrated
CPU(s) enabled: 8 cores, 8 chips, 1 core/chip
CPU(s) orderable: 2-32
Parallel: No
Primary Cache: 32KBI + 32KBD on chip
Secondary Cache: 4MB(I+D) off chip
L3 Cache: N/A
Other Cache: N/A
Memory: 8 GB
Disk Subsystem: 1 x 18 GB FC, 2 x 18 GB FC (striped)
Other Hardware: None
Software
Operating System: IRIX 6.5.16m
Compiler: MIPSpro 7.3.1.3m C, C++
SCSL 1.4 Math Library
File System: xfs
System State: Single-user
Notes / Tuning Information
Baseline optimization flags (C and C++ use same flags):
   PASS1 : -Ofast=ip35 -IPA:use_intrinsic -fb_create /tmp/SPEC2000/FBDIR/base/$(EXEBASE) 
   PASS2 : -Ofast=ip35 -IPA:use_intrinsic -fb_opt /tmp/SPEC2000/FBDIR/base/$(EXEBASE) 
 Portability Flags:
   176.gcc: -Dalloca=__builtin_alloca -DMIPS -DHOST_WORDS_BIG_ENDIAN
   186.crafty: -DSGI
   253.perlbmk: -DSPEC_CPU2000_SGI -DI_FCNTL
   252.eon: -lm 
   254.gap: -DSYS_IS_USG -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_IOCTL_PROTO
            -DSYS_HAS_ANSI -DSYS_HAS_CALLOC_PROTO
   300.twolf: -DHAVE_SIGNED_CHAR
Peak optimization flags:
note:  all occurances of (FEEDBACK) below means compiled with a two-step process: 
   PASS1 = -fb_create /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
   PASS2 = -fb_opt /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
 164.gzip: -Ofast=ip35 -IPA:space=500:plimit=500 -lmalloc (FEEDBACK)
 175.vpr: -Ofast=ip35 -IPA:space=300:plimit=10000:callee_limit=5000:linear=on 
 .        -LNO:prefetch_ahead=2 -INLINE:aggressive=on 
 .        -OPT:Olimit=0:alias=disjoint:alias=restrict -CG:ld_latency=10 -lmalloc (FEEDBACK)
 181.mcf: basepeak=yes
 176.gcc: -Ofast=ip35 -CG:ld_latency=4 (FEEDBACK)
 186.crafty: -Ofast=ip35 -LNO:prefetch=0 -OPT:goto=off -CG:ld_latency=4 -lmalloc (FEEDBACK)
 197.parser: -Ofast=ip35 -IPA:min_hot=14 (FEEDBACK)
 252.eon: -Ofast=ip35 -LNO:prefetch=0 -LANG:exceptions=off -CG:ld_latency=4 -lmalloc -lm 
 .        (FEEDBACK)
 253.perlbmk: -Ofast=ip35 -IPA:use_intrinsic -Wl,-x (FEEDBACK)
 254.gap: -Ofast=ip35 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4
 . -OPT:alias=restrict:alias=disjoint -IPA:min_hot=7 -CG:ld_latency=8 -lmalloc (FEEDBACK)
 255.vortex: -Ofast=ip35 -IPA:use_intrinsic 
 .           -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 -LNO:opt=0 -CG:ld_latency=5 
 .           -IPA:min_hot=14 -TENV:X=4 -IPA:space=500:plimit=3600 -OPT:goto=off (FEEDBACK)
 256.bzip2: -Ofast=ip35 -IPA:min_hot=5:space=500:plimit=2900 -INLINE:aggressive=on (FEEDBACK)
 300.twolf: basepeak=yes
 The following O/S parameters were set:
   setenv PAGESIZE_DATA 4096 ; setenv PAGESIZE_TEXT 4096 ; setenv PAGESIZE_STACK 4096 
   systune -i ; percent_totalmem_4m_pages = 40 ; percent_totalmem_1m_pages = 7 
   systune -i ; percent_totalmem_256k_pages = 7 ; percent_totalmem_64k_pages = 7 
   systune -i ; r12k_bdiag = 0x4000000 
   limit stacksize 500000
 The following is done before building each benchmark that requires (FEEDBACK):  
 rm -rf /tmp/SPEC2000/FBDIR_peak/$baseexe ; mkdir -p /tmp/SPEC2000/FBDIR_peak/$baseexe 
 Jobs are submitted using dplace. Contents of the placement file submit.pf:   
 memories 1 in topology physical near $NODE
 threads 1
 run thread 0 on memory 0 using cpu $CPU
 The first disk mentioned in the Disk Subsystem is the system disk. A striped   
 XFS filesystem was created using the rest of the disks and the benchmark was  
 run on this.


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 09-Jul-2002

Generated on Fri Mar 25 16:02:33 2005 by SPEC CPU2000 HTML formatter v1.01