SPEC® CFP2006 Result

Hewlett-Packard Company

HP Integrity rx7640 (1.6GHz/18MB Dual-Core
Intel Itanium 2)

SPECfp®_rate2006 = 90.8

SPECfp_rate_base2006 = 87.4

CPU2006 license:	03	Test date:	Sep-2006
Test sponsor:	Hewlett-Packard Company	Hardware Availability:	Sep-2006
Tested by:	Hewlett-Packard Company	Software Availability:	Sep-2006

Hardware
CPU Name:	Dual-Core Intel Itanium 2 9040
CPU Characteristics:	1.6GHz/18MB, 533MHz FSB
CPU MHz:	1600
FPU:	Integrated
CPU(s) enabled:	8 cores, 4 chips, 2 cores/chip
CPU(s) orderable:	1-8 chips
Primary Cache:	16 KB I + 16 KB D on chip per core
Secondary Cache:	1 MB I + 256 KB D on chip per core
L3 Cache:	9 MB I+D on chip per core
Other Cache:	None
Memory:	32 GB (16x2GB DIMMs)
Disk Subsystem:	36GB 15K RPM SCSI
Other Hardware:	None

Software
Operating System:	HPUX11i-TCOE B.11.23.0609
Compiler:	HP C/aC++ Developer's Bundle C.11.23.12 HP Fortran90 Compiler B.11.23.32
Auto Parallel:	No
File System:	vxfs
System State:	Multi-user
Base Pointers:	32-bit
Peak Pointers:	32-bit
Other Software:	None

Results Table

Benchmark	Base							Peak
Benchmark	Copies	Seconds	Ratio	Seconds	Ratio	Seconds	Ratio	Copies	Seconds	Ratio	Seconds	Ratio	Seconds	Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
410.bwaves	8	1648	66.0	1647	66.0	1648	66.0	8	1648	66.0	1647	66.0	1648	66.0
416.gamess	8	2249	69.7	2243	69.8	2244	69.8	8	2145	73.0	2143	73.1	2144	73.1
433.milc	8	1617	45.4	1615	45.5	1613	45.5	8	1553	47.3	1550	47.4	1553	47.3
434.zeusmp	8	798	91.2	795	91.6	798	91.2	8	798	91.2	795	91.6	798	91.2
435.gromacs	8	517	111	516	111	516	111	8	456	125	455	125	455	126
436.cactusADM	8	460	208	460	208	459	208	8	460	208	460	208	459	208
437.leslie3d	8	1347	55.8	1346	55.9	1346	55.9	8	1347	55.8	1346	55.9	1346	55.9
444.namd	8	305	210	305	211	305	211	8	305	210	305	211	305	211
447.dealII	8	638	143	648	141	635	144	8	638	143	648	141	635	144
450.soplex	8	1412	47.2	1384	48.2	1383	48.2	8	1250	53.4	1208	55.2	1209	55.2
453.povray	8	597	71.3	593	71.7	593	71.8	8	487	87.3	486	87.6	486	87.6
454.calculix	8	601	110	599	110	599	110	8	601	110	599	110	599	110
459.GemsFDTD	8	1986	42.7	1986	42.7	1994	42.6	8	1928	44.0	1925	44.1	1927	44.1
465.tonto	8	1029	76.5	1029	76.5	1029	76.5	8	987	79.7	988	79.7	988	79.6
470.lbm	8	1248	88.1	1248	88.1	1248	88.1	8	1248	88.1	1248	88.1	1248	88.1
481.wrf	8	1050	85.1	1042	85.8	1046	85.4	8	1050	85.1	1042	85.8	1046	85.4
482.sphinx3	8	1076	145	1071	146	1072	146	8	1055	148	1042	150	1042	150

Operating System Notes

   The system had the September 2006 HP-UX 11i v2 Technical Computing
   Operating Environment (TCOE) and compilers installed, along with
   the following patches:

   PHSS_34858  linker + fdp cumulative patch
   PHSS_34853  Math Library Cumulative Patch
   PHSS_34854  Integrity Unwind Library
   PHSS_34855  HP C Compiler (A.06.12)
   PHSS_34856  aC++ Compiler (A.06.12)
   PHSS_34857  u2comp/be/plugin library patch
   PHSS_34395  FORTRAN I/O Library [libIO77]
   PHSS_34397  FORTRAN Intrinsics [libF90 B.11.23.17]
   PHSS_34399  Fortran Product Patch, v3.1 to v3.1.1
   PHKL_34020  Perfmon enhancements and Itanium Dual-Core

   The following kernel tunables were set, in addition to the defaults
   set by the Technical Computing OE:

   dbc_max_pct=20
   dbc_min_pct=20
   maxdsiz=3221225472
   maxssiz=401604608

Platform Notes

 The system was configured as a single partition with 1 cell and
 4 processors (8 cores) per cell.

 The following config file entry was used to bind
 processes to cells using the HP-UX "mpsched" utility:
 submit = let "MYNUM=$SPECCOPYNUM" ; let "LDOM=\$MYNUM/8" ; mpsched -l \$LDOM $command

Base Compiler Invocation

Base Portability Flags

453.povray:	-DSPEC_CPU_NEED_INVHYP
454.calculix:	-DSPEC_CPU_NOZMODIFIER
481.wrf:	-DNOUNDERSCORE +noppu

Peak Compiler Invocation

C benchmarks:

/opt/ansic/bin/cc -Ae

C++ benchmarks:

/opt/aCC/bin/aCC -Aa

Fortran benchmarks:

/opt/fortran90/bin/f90

Benchmarks using both Fortran and C:

/opt/ansic/bin/cc -Ae /opt/fortran90/bin/f90

Peak Portability Flags

453.povray:	-DSPEC_CPU_NEED_INVHYP
454.calculix:	-DSPEC_CPU_NOZMODIFIER
481.wrf:	-DNOUNDERSCORE +noppu

Peak Optimization Flags

C benchmarks:

433.milc:	+Oprofile=collect:all(pass 1) +Oprofile=use(pass 2) +Ofaster +Otype_safety=ansi -Wl,-a,archive_shared -Wl,+pd,64M -Wl,+pi,64M +Onoparmsoverlap -Wl,-N
470.lbm:	basepeak = yes
482.sphinx3:	+Oprofile=collect:all(pass 1) +Oprofile=use(pass 2) +Ofaster +Otype_safety=ansi -Wl,-a,archive_shared -Wl,+pd,64M -Wl,+pi,64M +Onoparmsoverlap

C++ benchmarks:

444.namd:	basepeak = yes
447.dealII:	basepeak = yes
450.soplex:	+Oprofile=collect:all(pass 1) +Oprofile=use(pass 2) +Ofaster +Otype_safety=ansi -Wl,-a,archive_shared -Wl,+pd,64M -Wl,+pi,64M +Onoparmsoverlap -Wl,-N
453.povray:	+Oprofile=collect:all(pass 1) +Oprofile=use(pass 2) +Ofaster +Otype_safety=ansi -Wl,-a,archive_shared -Wl,+pd,64M -Wl,+pi,64M

Fortran benchmarks:

410.bwaves:	basepeak = yes
416.gamess:	+Ofaster -Wl,-a,archive_shared -Wl,+pd,64M -Wl,+pi,64M +Odataprefetch=direct -Wl,-N
434.zeusmp:	basepeak = yes
437.leslie3d:	basepeak = yes
459.GemsFDTD:	+Oprofile=collect:all(pass 1) +Oprofile=use(pass 2) +Ofaster -Wl,-a,archive_shared -Wl,+pd,64M -Wl,+pi,64M +Odataprefetch=direct -Wl,-N
465.tonto:	+Oprofile=collect:all(pass 1) +Oprofile=use(pass 2) +Ofaster -Wl,-a,archive_shared -Wl,+pd,64M -Wl,+pi,64M +Odataprefetch=direct

Benchmarks using both Fortran and C:

435.gromacs:	+Oprofile=collect:all(pass 1) +Oprofile=use(pass 2) +Ofaster(-hp_cc) +Otype_safety=ansi -Wl,-a,archive_shared -Wl,+pd,64M -Wl,+pi,64M +Onoparmsoverlap +Ofaster(-hp_f90)
436.cactusADM:	basepeak = yes
454.calculix:	basepeak = yes
481.wrf:	basepeak = yes

The flags file that was used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.06.html.

You can also download the XML flags source by saving the following link:
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090715.06.xml.