Base Compiler Invocation
C benchmarks
-
- icc
![[user]](http://www.spec.org/auto/cpu2006/flags/user.png)
- CC, LD
-
Invoke the Intel C++ compiler for IPF Linux64 to compile C applications
C++ benchmarks
-
- icpc
- CXX, LD
-
Invoke the Intel C++ compiler for IPF Linux64 to compiler C++ applications
Copyright © 2006 Intel Corporation. All Rights Reserved.
Invoke the Intel C++ compiler for IPF Linux64 to compile C applications
Invoke the Intel C++ compiler for IPF Linux64 to compiler C++ applications
Invoke the Intel C++ compiler for IPF Linux64 to compile C applications
Invoke the Intel C++ compiler for IPF Linux64 to compiler C++ applications
![[benchmark]](http://www.spec.org/auto/cpu2006/flags/benchmark.png)
This macro specifies that the target system uses the LP64 data model; specifically, that integers are 32 bits, while longs and pointers are 64 bits.
This macro indicates that the benchmark is being compiled on an Intel IA64-compatible system running the Linux operating system.
![[suite]](http://www.spec.org/auto/cpu2006/flags/suite.png)
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
Portability changes for Linux
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This flag can be set for SPEC compilation for Linux using default compiler.
This macro specifies that the target system uses the LP64 data model; specifically, that integers are 32 bits, while longs and pointers are 64 bits.
This macro indicates that the benchmark is being compiled on an Intel IA64-compatible system running the Linux operating system.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
Portability changes for Linux
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This flag can be set for SPEC compilation for Linux using default compiler.
The -fast option enhances execution speed across the entire program by including the following options that can improve run-time performance:
-O3 (maximum speed and high-level optimizations)
-ipo (enables interprocedural optimizations across files)
-static (link libraries statically)
To override one of the options set by /fast, specify that option after the -fast option on the command line. The options set by /fast may change from release to release.
Enables use of faster but slightly less accurate code sequences for math functions, including sqrt, reciprocal sqrt, divide and reciprocal. When compared to strict IEEE* precision, this option slightly reduces the accuracy of floating-point calculations performed by these functions, usually limited to the least significant digit.
This option also performs reassociation transformations, which can alter the order of operations, over a larger scope. The increased reasssociation enables generation of more optimal sequences of Floating point Multiply Add instructions than not using this option. Note that use of Floating point Multiply Add can cause programs to produce different numerical results due to changes in rounding.
Tells the compiler to assume the program does adhere to the rules defined in the ISO C Standard. The default is to not assume such adherence. If your C/C++ program adheres to these rules, then -ansi-alias will allow the compiler to optimize more aggressively. If it doesn't adhere to these rules, then assuming so can cause the compiler to generate incorrect code.
The -fast option enhances execution speed across the entire program by including the following options that can improve run-time performance:
-O3 (maximum speed and high-level optimizations)
-ipo (enables interprocedural optimizations across files)
-static (link libraries statically)
To override one of the options set by /fast, specify that option after the -fast option on the command line. The options set by /fast may change from release to release.
Enables use of faster but slightly less accurate code sequences for math functions, including sqrt, reciprocal sqrt, divide and reciprocal. When compared to strict IEEE* precision, this option slightly reduces the accuracy of floating-point calculations performed by these functions, usually limited to the least significant digit.
This option also performs reassociation transformations, which can alter the order of operations, over a larger scope. The increased reasssociation enables generation of more optimal sequences of Floating point Multiply Add instructions than not using this option. Note that use of Floating point Multiply Add can cause programs to produce different numerical results due to changes in rounding.
Tells the compiler to assume the program does adhere to the rules defined in the ISO C Standard. The default is to not assume such adherence. If your C/C++ program adheres to these rules, then -ansi-alias will allow the compiler to optimize more aggressively. If it doesn't adhere to these rules, then assuming so can cause the compiler to generate incorrect code.
The -Wl option directs the compiler to pass a list of arguments to the linker. In this case, "-z muldefs" is passed to the linker. For the Gnu linker (ld), the "-z keyword" option accepts several recognized keywords. Keyword "muldefs" allows multiple definitions. The muldefs keyword will enable, for example, linking with third party libraries like SmartHeap from Microquill.
MicroQuill SmartHeap Library for C++ (must be linked with libsmartheap64.a). available from http://www.microquill.com/
MicroQuill SmartHeap Library available from http://www.microquill.com/
Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.
Instructs the compiler to produce a profile-optimized
executable and merges available dynamic information (.dyn)
files into a pgopti.dpi file. If you perform multiple
executions of the instrumented program, -Qprof_use merges
the dynamic information files again and overwrites the
previous pgopti.dpi file.
Without any other options, the current directory is
searched for .dyn files
The -fast option enhances execution speed across the entire program by including the following options that can improve run-time performance:
-O3 (maximum speed and high-level optimizations)
-ipo (enables interprocedural optimizations across files)
-static (link libraries statically)
To override one of the options set by /fast, specify that option after the -fast option on the command line. The options set by /fast may change from release to release.
Enables use of faster but slightly less accurate code sequences for math functions, including sqrt, reciprocal sqrt, divide and reciprocal. When compared to strict IEEE* precision, this option slightly reduces the accuracy of floating-point calculations performed by these functions, usually limited to the least significant digit.
This option also performs reassociation transformations, which can alter the order of operations, over a larger scope. The increased reasssociation enables generation of more optimal sequences of Floating point Multiply Add instructions than not using this option. Note that use of Floating point Multiply Add can cause programs to produce different numerical results due to changes in rounding.
Tells the compiler to assume the program does adhere to the rules defined in the ISO C Standard. The default is to not assume such adherence. If your C/C++ program adheres to these rules, then -ansi-alias will allow the compiler to optimize more aggressively. If it doesn't adhere to these rules, then assuming so can cause the compiler to generate incorrect code.
Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.
Instructs the compiler to produce a profile-optimized
executable and merges available dynamic information (.dyn)
files into a pgopti.dpi file. If you perform multiple
executions of the instrumented program, -Qprof_use merges
the dynamic information files again and overwrites the
previous pgopti.dpi file.
Without any other options, the current directory is
searched for .dyn files
The -fast option enhances execution speed across the entire program by including the following options that can improve run-time performance:
-O3 (maximum speed and high-level optimizations)
-ipo (enables interprocedural optimizations across files)
-static (link libraries statically)
To override one of the options set by /fast, specify that option after the -fast option on the command line. The options set by /fast may change from release to release.
Enables use of faster but slightly less accurate code sequences for math functions, including sqrt, reciprocal sqrt, divide and reciprocal. When compared to strict IEEE* precision, this option slightly reduces the accuracy of floating-point calculations performed by these functions, usually limited to the least significant digit.
This option also performs reassociation transformations, which can alter the order of operations, over a larger scope. The increased reasssociation enables generation of more optimal sequences of Floating point Multiply Add instructions than not using this option. Note that use of Floating point Multiply Add can cause programs to produce different numerical results due to changes in rounding.
Tells the compiler to assume the program does adhere to the rules defined in the ISO C Standard. The default is to not assume such adherence. If your C/C++ program adheres to these rules, then -ansi-alias will allow the compiler to optimize more aggressively. If it doesn't adhere to these rules, then assuming so can cause the compiler to generate incorrect code.
The -Wl option directs the compiler to pass a list of arguments to the linker. In this case, "-z muldefs" is passed to the linker. For the Gnu linker (ld), the "-z keyword" option accepts several recognized keywords. Keyword "muldefs" allows multiple definitions. The muldefs keyword will enable, for example, linking with third party libraries like SmartHeap from Microquill.
MicroQuill SmartHeap Library for C++ (must be linked with libsmartheap64.a). available from http://www.microquill.com/
MicroQuill SmartHeap Library available from http://www.microquill.com/
Instrument program for profiling for the first phase of two-phase profile guided otimization. This instrumentation gathers information about a program's execution paths and data values but does not gather information from hardware performance counters. The profile instrumentation also gathers data for optimizations which are unique to profile-feedback optimization.
Instructs the compiler to produce a profile-optimized
executable and merges available dynamic information (.dyn)
files into a pgopti.dpi file. If you perform multiple
executions of the instrumented program, -Qprof_use merges
the dynamic information files again and overwrites the
previous pgopti.dpi file.
Without any other options, the current directory is
searched for .dyn files
The -fast option enhances execution speed across the entire program by including the following options that can improve run-time performance:
-O3 (maximum speed and high-level optimizations)
-ipo (enables interprocedural optimizations across files)
-static (link libraries statically)
To override one of the options set by /fast, specify that option after the -fast option on the command line. The options set by /fast may change from release to release.
Enables use of faster but slightly less accurate code sequences for math functions, including sqrt, reciprocal sqrt, divide and reciprocal. When compared to strict IEEE* precision, this option slightly reduces the accuracy of floating-point calculations performed by these functions, usually limited to the least significant digit.
This option also performs reassociation transformations, which can alter the order of operations, over a larger scope. The increased reasssociation enables generation of more optimal sequences of Floating point Multiply Add instructions than not using this option. Note that use of Floating point Multiply Add can cause programs to produce different numerical results due to changes in rounding.
Tells the compiler to assume the program does adhere to the rules defined in the ISO C Standard. The default is to not assume such adherence. If your C/C++ program adheres to these rules, then -ansi-alias will allow the compiler to optimize more aggressively. If it doesn't adhere to these rules, then assuming so can cause the compiler to generate incorrect code.
Specifies the percentage multiplier that should be applied to all inlining options that define upper limits: -inline-max-size, -inline-max-total-size, -inline-max-per-routine, and -inline-max-per-compile. This option takes the default value for each of the above options and multiplies it by n divided by 100. For example, if 200 is specified, all inlining options that define upper limits are multiplied by a factor of 2. n is a positive integer specifying the percentage value. The default value is 100 (a factor of 1).
The -Wl option directs the compiler to pass a list of arguments to the linker. In this case, "-z muldefs" is passed to the linker. For the Gnu linker (ld), the "-z keyword" option accepts several recognized keywords. Keyword "muldefs" allows multiple definitions. The muldefs keyword will enable, for example, linking with third party libraries like SmartHeap from Microquill.
MicroQuill SmartHeap Library for C++ (must be linked with libsmartheap64.a). available from http://www.microquill.com/
MicroQuill SmartHeap Library available from http://www.microquill.com/
This section contains descriptions of flags that were included implicitly by other flags, but which do not have a permanent home at SPEC.
Enables O2 optimizations plus more aggressive optimizations,
such as prefetching, scalar replacement, and loop and memory
access transformations. Enables optimizations for maximum speed,
such as:
- Loop unrolling, including instruction scheduling
- Code replication to eliminate branches
- Padding the size of certain power-of-two arrays to allow
more efficient cache use.
On Intel Itanium processors, the O3 option enables optimizations
for technical computing applications (loop-intensive code):
loop optimizations and data prefetch.
The O3 optimizations may not cause higher performance unless loop and
memory access transformations take place. The optimizations may slow
down code in some cases compared to O2 optimizations.
The O3 option is recommended for applications that have loops that heavily
use floating-point calculations and process large data sets.
Enables optimizations for speed. This is the generally recommended
optimization level. This option also enables:
- Inlining of intrinsics
- Intra-file interprocedural optimizations, which include:
- inlining
- constant propagation
- forward substitution
- routine attribute propagation
- variable address-taken analysis
- dead static function elimination
- removal of unreferenced variables
- The following capabilities for performance gain:
- constant propagation
- copy propagation
- dead-code elimination
- global register allocation
- global instruction scheduling and control speculation
- loop unrolling
- optimized code selection
- partial redundancy elimination
- strength reduction/induction variable simplification
- variable renaming
- exception handling optimizations
- tail recursions
- peephole optimizations
- structure assignment lowering and optimizations
- dead store elimination
Enables optimizations for speed and disables some optimizations that
increase code size and affect speed.
To limit code size, this option:
- Enables global optimization; this includes data-flow analysis,
code motion, strength reduction and test replacement, split-lifetime
analysis, and instruction scheduling.
- Disables intrinsic recognition and intrinsics inlining.
The O1 option may improve performance for applications with very large
code size, many branches, and execution time not dominated by code within loops.
On IPF Linux64 platforms, -O1 disable software pipelining and global code scheduling.
On Intel Itanium processors, this option also enables optimizations for server applications
(straight-line and branch-like code with a flat profile).
-unroll0, -fbuiltin, -mno-ieee-fp, -fomit-frame-pointer (same as -fp), -ffunction-sections
Tells the compiler the maximum number of times (n) to unroll loops.
Enables inline expansion of all intrinsic functions.
Disables conformance to the ANSI C and IEEE 754 standards for floating-point arithmetic.
Allows use of EBP as a general-purpose register in optimizations.
Places each function in its own COMDAT section.
Multi-file ip optimizations that includes:
- inline function expansion
- interprocedural constant propogation
- dead code elimination
- propagation of function characteristics
- passing arguments in registers
- loop-invariant code motion
-static prevents linking with shared libraries.
maxcpus=0
Linux boot-time kernel parameter. A command-line option of nosmp or maxcpus=0 will
disable SMP activation entirely; maxcpus=N limits the maximum number of CPUs activated in SMP mode to
N. See bootparam(7).
Additional Notes on partitions and local memory:
The HP Integrity rx7640, rx8640, and Superdome systems
may be configured as one large system or as multiple independent smaller systems via hard parititions
(nPars). Each hard partition consists of one or more cells with their associated processors, memory,
and I/O chassis, and is isolated from events in other partitions. The memory within a partition can
either be assigned to local memory pools for each cell, or assigned to an interleaved pool that is
distributed by cache line across the cells. Partitions and their attributes can be created and
modified via the support management station, or via the nPartition (par*) commands running on an
os instance in a system partition.
Flag description origin markings:
|
Indicates that the flag description came from the user flags file. |
|
Indicates that the flag description came from the suite-wide flags file. |
|
Indicates that the flag description came from a per-benchmark flags file. |
For questions about the meanings of these flags, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright 2006-2014 Standard Performance Evaluation Corporation
Tested with SPEC CPU2006 v1.0.
Report generated on Tue Jul 22 10:15:22 2014 by SPEC CPU2006 flags formatter v6906.