# Invocation command line:
# /work/cpu2006-v10/bin/runspec -c fsc-amd512K8 -T all --input ref -n 3 --rate 4 -o all int
# output_root was not used for this run
############################################################################
# AMD64 (64-bit) Linux/SuSE Pathscale v2.5 config file 
# Config file for CPU2006
#####################################################################

flagsurl000   = http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.25.xml
tune          = base
ext           = amd512K8
output_format = asc,html
# teeout        = yes
teerunout     = yes
mean_anyway   = yes
reportable    = yes

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# File to be included into config file for SPEC CPU2000

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

# use_submit_for_speed=1
# submit= MYMASK=\$((1<<\$SPECUSERNUM)) ; /usr/bin/taskset \$MYMASK $command
# submit=MYMASK=`printf '0x%x' \$((1<<$SPECUSERNUM))` ; /usr/bin/taskset \$MYMASK $command

# submit mit numactl
submit=VALCORE=`printf '%d' \$SPECCOPYNUM` ; VALMEM=`printf '%d' \$((\$SPECCOPYNUM/2))` ; numactl --membind \$VALMEM taskset -c \$VALCORE $command

################################################################
# System information
# If some remarks about BIOS or Firmware are needed, place them here.
################################################################

default=default=default=default:
notes_os_000= powersave -f is applied to set CPU to maximum frequency prior to run
notes_os_005= stacksize is set to unlimited prior to run
notes_os_010 = taskset utility used to bind CPU(s) to processes
notes_os_015 = numactl utility used to assign to each chip its local memory
notes_015=
notes_020=BIOS default settings with
notes_025=Node memory interleave disabled, SRAT enabled

# notes905=taskset has been used to bind processes to CPUs

################################################################
# About Fujitsu Siemens Computers
################################################################

default=default=default=default:
notes_030=
notes_035=For information about Fujitsu Siemens Computers in your country please see:
notes_040=http://www.fujitsu-siemens.com/countries

# Blank line at the end
notes_045=

################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor=Fujitsu Siemens Computers
hw_model=CELSIUS V840, AMD Opteron 2220
hw_cpu_name=AMD Opteron 2220
hw_cpu_char=Dual Core, 2.8 GHz, 2 MB L2-cache
hw_cpu_mhz=2800
hw_fpu=Integrated

hw_nchips=2
hw_ncores=4
hw_ncoresperchip=2
hw_nthreadspercore=1

hw_ncpuorder=1,2 chips
hw_pcache=64 KB I + 64 KB D on chip per core
hw_scache=1 MB I+D on chip per core
hw_tcache=None
hw_ocache=None
hw_memory000=16 GB (8x2GB DDR2-667 CL5 dual rank ECC DIMMs
hw_memory001 = registered)
hw_disk=SATA II, 80 GB
hw_other=None

sw_file=ext3
sw_state=Multi-User SuSE Run Level 3

test_sponsor=Fujitsu Siemens Computers
license_num=22
tester=Fujitsu Siemens Computers
test_date=Feb-2007
hw_avail=Feb-2007
prepared_by=Fujitsu Siemens Computers
config=
# ---- End inclusion of '/work/cpu2006-v10/config/SUT.inc'

############################ Software Info   ############################
default=default=default=default:
sw_os        = SLES 10 for AMD64/EM64T
sw_compiler    = QLogic Pathscale Compiler Suite 2.5
sw_other       = SmartHeap 8.0 32 bit Library for Linux
sw_auto_parallel    = No
sw_avail       = Aug-2006
notes_000=
notes_005=Binaries are generated on an Opteron-based system
notes_010=     running SuSE 9.3 (Kernel 2.6.5.7)

# Enable parallel make
default=default=default:
makeflags     = -j2
EXTRA_LDFLAGS =  -IPA:max_jobs=2


default=default=default:
#####################################################################
# Compiler selection
#
#
CC           = pathcc
CXX          = pathCC
FC           = pathf95
SMARTHEAP_DIR = /spec/mpaton/6v1.0/amd512K8.lib/microquill/lib


#####################################################################
# Portability for default 64-bit code generation
#####################################################################

default=default=default:
PORTABILITY = -DSPEC_CPU_LP64

#####################################################################
# INT Portability
#####################################################################

400.perlbench=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64 -DSPEC_CPU_LP64

462.libquantum=default=default:
CPORTABILITY=  -DSPEC_CPU_LINUX

471.omnetpp=default=default:
# Needed to avoid -DSPEC_CPU_LP64 on -m32 C++ base codes
PORTABILITY =

473.astar=default=default:
# Needed to avoid -DSPEC_CPU_LP64 on -m32 C++ base codes
PORTABILITY =

483.xalancbmk=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX
# Needed to avoid -DSPEC_CPU_LP64 on -m32 C++ base codes
PORTABILITY =

#################################################################
#                                                               #
#          SPECint Tuning & Notes                               #
#                                                               #
#################################################################

int=base:
COPTIMIZE    = -Ofast
CXXOPTIMIZE  = -Ofast -m32
EXTRA_CXXLIBS= -L$(SMARTHEAP_DIR) -lsmartheap

sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit

#####################################################################
# INT Peak Tuning
#####################################################################

int=peak=default:
COPTIMIZE    = -Ofast
CXXOPTIMIZE  = -Ofast -m32
EXTRA_CXXLIBS= -L$(SMARTHEAP_DIR) -lsmartheap
PASS1_CFLAGS  = -fb_create fbdata 
PASS1_CXXFLAGS  = -fb_create fbdata 
PASS1_LDFLAGS = -fb_create fbdata
PASS2_CFLAGS  = -fb_opt fbdata
PASS2_CXXFLAGS  = -fb_opt fbdata
PASS2_LDFLAGS = -fb_opt fbdata

400.perlbench=peak=default:
# Peak flags inherited from int=peak=default: -Ofast +FDO

401.bzip2=peak=default:
COPTIMIZE=-O3 -LNO:ou_prod_max=10 -OPT:Ofast:alias=disjoint
feedback=0

403.gcc=peak=default:
PORTABILITY =
COPTIMIZE=-m32 -O3 -OPT:Ofast

429.mcf=peak=default:
PORTABILITY =
COPTIMIZE=-m32 -O2 -ipa
feedback=0
EXTRA_CLIBS = -L$(SMARTHEAP_DIR) -lsmartheap

445.gobmk=peak=default:
COPTIMIZE=-O3 -OPT:alias=disjoint -LNO:simd=0:minvariant=off -WOPT:retype_expr=on

456.hmmer=peak=default:
COPTIMIZE=-O2 -OPT:alias=disjoint -WOPT:aggstr=0 -CG:cflow=0
feedback=0

458.sjeng=peak=default:
COPTIMIZE=-O3 -IPA:plimit=50000 -IPA:pu_reorder=2

462.libquantum=peak=default:
COPTIMIZE=-O3 -ipa -CG:local_fwd_sched=on -IPA:space=1000
feedback=0

464.h264ref=peak=default:
COPTIMIZE=-O3 -IPA:plimit=20000 -OPT:alias=disjoint -LNO:prefetch=0

471.omnetpp=peak=default:
CXXOPTIMIZE= -Ofast -IPA:pu_reorder=2 -CG:gcm=off -m32
feedback=0

473.astar=peak=default:
CXXOPTIMIZE=-Ofast -m32

483.xalancbmk=peak=default:
CXXOPTIMIZE=-Ofast -m32 -OPT:unroll_times_max=8
feedback=0

#####################################################################
# FP Portability
#####################################################################

436.cactusADM=default=default:
FPORTABILITY=  -fno-second-underscore		   

447.dealII=default=default:
CXXPORTABILITY = -DSPEC_CPU_TABLE_WORKAROUND

481.wrf=default=default:
FPORTABILITY= -fno-second-underscore
CPORTABILITY= -DSPEC_CPU_LINUX

#################################################################
#                                                               #
#                        SPECfp Tuning                          #
#                                                               #
#################################################################

fp=base:
COPTIMIZE    = -Ofast
CXXOPTIMIZE  = -Ofast
FOPTIMIZE    = -Ofast

sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit

#####################################################################
# FP Peak Tuning
#####################################################################

fp=peak=default:
COPTIMIZE    = -Ofast
CXXOPTIMIZE  = -Ofast
FOPTIMIZE    = -Ofast
PASS1_CFLAGS   = -fb_create fbdata
PASS2_CFLAGS   = -fb_opt fbdata
PASS1_CXXFLAGS = -fb_create fbdata
PASS2_CXXFLAGS = -fb_opt fbdata
PASS1_FFLAGS   = -fb_create fbdata
PASS2_FFLAGS   = -fb_opt fbdata
PASS1_LDFLAGS  = -fb_create fbdata
PASS2_LDFLAGS  = -fb_opt fbdata

410.bwaves=peak=default:
FOPTIMIZE=-O3 -OPT:Ofast:IEEE_arith=3 -LNO:blocking=off:ignore_feedback=off

416.gamess=peak=default:
FOPTIMIZE=-O2 -OPT:Ofast:ro=3:unroll_size=256

433.milc=peak=default:
# Peak flags inherited from fp=peak=default: -Ofast +FDO

434.zeusmp=peak=default:
FOPTIMIZE=-Ofast -CG:local_fwd_sched=on -LNO:blocking=off:interchange=off:fu=10:full_unroll_outer=on
feedback=0

435.gromacs=peak=default:
FOPTIMIZE=-O3 -OPT:rsqrt=2:ro=3
COPTIMIZE=-O3 -OPT:rsqrt=2:ro=3
feedback=0

436.cactusADM=peak=default:
COPTIMIZE=-O3 -LNO:prefetch_ahead=5:ou_prod_max=10:full_unroll=5 -ipa
FOPTIMIZE=-O3 -LNO:prefetch_ahead=5:ou_prod_max=10:full_unroll=5 -ipa

437.leslie3d=peak=default:
basepeak=true

444.namd=peak=default:
# Peak flags inherited from fp=peak=default: -Ofast +FDO

447.dealII=peak=default:
CXXOPTIMIZE=-Ofast -m32 -fno-exceptions
feedback=0
# Needed to avoid -DSPEC_CPU_LP64
PORTABILITY =

450.soplex=peak=default:
CXXOPTIMIZE=-m32 -O3 -OPT:IEEE_arith=3 -CG:load_exe=0:movnti=1 -LNO:minvariant=off -fno-exceptions
# Needed to avoid -DSPEC_CPU_LP64 
PORTABILITY =

453.povray=peak=default:
CXXOPTIMIZE=-Ofast -fno-fast-math

454.calculix=peak=default:
FOPTIMIZE=-Ofast -CG:prefetch=off -LNO:simd=0 -OPT:unroll_times_max=8 -WOPT:mem_opnds=on
COPTIMIZE=-Ofast -CG:prefetch=off -LNO:simd=0 -OPT:unroll_times_max=8 -WOPT:mem_opnds=on
feedback=0

459.GemsFDTD=peak=default:
FOPTIMIZE=-Ofast -LNO:fission=2:prefetch=0
feedback=0

465.tonto=peak=default:
FOPTIMIZE=-Ofast -CG:local_fwd_sched=on -IPA:plimit=525
feedback=0

470.lbm=peak=default:
basepeak=true

481.wrf=peak=default:
basepeak=true

482.sphinx3=peak=default:
# Peak flags inherited from fp=peak=default: -Ofast +FDO