Compilers: GCC 4.3.0 (AMD64)
Last updated: 12-May-2008
![[user]](http://www.spec.org/auto/cpu2006/flags/user.png)
Invoke Suse's modified version of the GCC C compiler, or one direct from FSF.
Invoke Suse's modified version of the GCC C++ compiler, or one direct from FSF.
Invoke the FSF GCC fortran compiler
![[suite]](http://www.spec.org/auto/cpu2006/flags/suite.png)
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
![[benchmark]](http://www.spec.org/auto/cpu2006/flags/benchmark.png)
This macro indicates that the benchmark is being compiled on a Linux system.
This macro indicates that Fortran functions called from C should have their names lower-cased.
This option is used to indicate that the host system's integers are 32-bits wide, and longs and pointers are 64-bits wide. Not all benchmarks recognize this macro, but the preferred practice for data model selection applies the flags to all benchmarks; this flag description is a placeholder for those benchmarks that do not recognize this macro.
Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions, -funswitch-loops and -fgcse-after-reload options.
Unroll loops whose number of iterations can be determined at compile time or upon entry to the loop. -funroll-loops implies both -fstrength-reduce and -frerun-cse-after-loop. This option makes code larger, and may or may not make it run faster.
Does not allow the compiler to assume the strictest aliasing rules applicable to the language being compiled. For C (and C++), optimizations based on the type of expressions are not activated.
Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions, -funswitch-loops and -fgcse-after-reload options.
Unroll loops whose number of iterations can be determined at compile time or upon entry to the loop. -funroll-loops implies both -fstrength-reduce and -frerun-cse-after-loop. This option makes code larger, and may or may not make it run faster.
Does not allow the compiler to assume the strictest aliasing rules applicable to the language being compiled. For C (and C++), optimizations based on the type of expressions are not activated.
Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions, -funswitch-loops and -fgcse-after-reload options.
Unroll loops whose number of iterations can be determined at compile time or upon entry to the loop. -funroll-loops implies both -fstrength-reduce and -frerun-cse-after-loop. This option makes code larger, and may or may not make it run faster.
Does not allow the compiler to assume the strictest aliasing rules applicable to the language being compiled. For C (and C++), optimizations based on the type of expressions are not activated.
Optimize yet more. -O3 turns on all optimizations specified by -O2 and also turns on the -finline-functions, -funswitch-loops and -fgcse-after-reload options.
Unroll loops whose number of iterations can be determined at compile time or upon entry to the loop. -funroll-loops implies both -fstrength-reduce and -frerun-cse-after-loop. This option makes code larger, and may or may not make it run faster.
Does not allow the compiler to assume the strictest aliasing rules applicable to the language being compiled. For C (and C++), optimizations based on the type of expressions are not activated.
This section contains descriptions of flags that were included implicitly by other flags, but which do not have a permanent home at SPEC.
Integrate all simple functions into their callers. The compiler heuristically decides which functions are simple enough to be worth integrating in this way.
If all calls to a given function are integrated, and the function is declared "static", then the function is normally not output as assembler code in its own right.
Move branches with loop invariant conditions out of the loop, with duplicates of the loop on both branches (modified according to result of the condition).
When -fgcse-after-reload is enabled, a redundant load elimination pass is performed after reload. The purpose of this pass is to cleanup redundant spilling.
-O2 Optimize even more. GCC performs nearly all supported optimizations that do not involve a space-speed tradeoff. The compiler does not perform loop unrolling or function inlining when you specify -O2. As compared to -O, this option increases both compilation time and the performance of the generated code. -O2 turns on all optimization flags specified by -O. It also turns on the following optimization flags: -fthread-jumps -fcrossjumping -foptimize-sibling-calls -fcse-follow-jumps -fcse-skip-blocks -fgcse -fgcse-lm -fexpensive-optimizations -fstrength-reduce -frerun-cse-after-loop -fcaller-saves -fno-peephole2 -fschedule-insns -fschedule-insns2 -fsched-interblock -fno-sched-spec -fregmove -fstrict-aliasing -fdelete-null-pointer-checks -freorder-blocks -freorder-functions -funit-at-a-time -falign-functions -falign-jumps -falign-loops -falign-labels -ftree-vrp -ftree-pre
Perform optimizations where we check to see if a jump branches to a location where another comparison subsumed by the first is found. If so, the first branch is redirected to either the destination of the second branch or a point immediately following it, depending on whether the condition is known to be true or false. Enabled at levels -O2, -O3, -Os.
Perform cross-jumping transformation. This transformation unifies equivalent code and saves code size. The resulting code may or may not perform better than without cross-jumping. Enabled at levels -O2, -O3, -Os.
Optimize sibling and tail recursive calls. Enabled at levels -O2, -O3, -Os.
In common subexpression elimination, scan through jump instructions when the target of the jump is not reached by any other path. For example, when CSE encounters an if statement with an else clause, CSE will follow the jump when the condition tested is false. Enabled at levels -O2, -O3, -Os.
This is similar to -fcse-follow-jumps, but causes CSE to follow jumps which conditionally skip over blocks. When CSE encounters a simple if statement with no else clause, -fcse-skip-blocks causes CSE to follow the jump around the body of the if. Enabled at levels -O2, -O3, -Os.
Perform a global common subexpression elimination pass. This pass also performs global constant and copy propagation. Note: When compiling a program using computed gotos, a GCC extension, you may get better runtime performance if you disable the global common subexpression elimination pass by adding -fno-gcse to the command line. Enabled at levels -O2, -O3, -Os.
When -fgcse-lm is enabled, global common subexpression elimination will attempt to move loads which are only killed by stores into themselves. This allows a loop containing a load/store sequence to be changed to a load outside the loop, and a copy/store within the loop. Enabled by default when gcse is enabled.
Perform a number of minor optimizations that are relatively expensive. For example, when this flag is enabled, CSE is re-run to clean up things done by gcse. Enabled at levels -O2, -O3, -Os.
Perform the optimizations of loop strength reduction and elimination of iteration variables. Enabled at levels -O2, -O3, -Os.
Re-run common subexpression elimination after loop optimizations have been performed.
Enable values to be allocated in registers that will be clobbered by function calls, by emitting extra instructions to save and restore the registers around such calls. Such allocation is done only when it seems to result in better code than would otherwise be produced. This option is always enabled by default on certain machines, usually those which have no call-preserved registers to use instead. Enabled at levels -O2, -O3, -Os.
Disable any machine-specific peephole optimizations. The difference between -fno-peephole and -fno-peephole2 is in how they are implemented in the compiler; some targets use one, some use the other, a few use both. -fpeephole is enabled by default. -fpeephole2 enabled at levels -O2, -O3, -Os.
If supported for the target machine, attempt to reorder instructions to eliminate execution stalls due to required data being unavailable. This helps machines that have slow floating point or memory load instructions by allowing other instructions to be issued until the result of the load or floating point instruction is required. Enabled at levels -O2, -O3, -Os
Similar to -fschedule-insns, but requests an additional pass of instruction scheduling after register allocation has been done. This is especially useful on machines with a relatively small number of registers and where memory load instructions take more than one cycle. Enabled at levels -O2, -O3, -Os.
Schedule instructions across basic blocks. This is enabled by default when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
Don't allow speculative motion of non-load instructions. This is normally enabled by default when scheduling before register allocation, i.e. with -fschedule-insns or at -O2 or higher.
Allows the compiler to assume the strictest aliasing rules applicable to the language being compiled. For C (and C++), this activates optimizations based on the type of expressions. In particular, an object of one type is assumed never to reside at the same address as an object of a different type, unless the types are almost the same. For example, an "unsigned int" can alias an "int", but not a "void*" or a "double". A character type may alias any other type.
Pay special attention to code like this:
union a_union {
int i;
double d;
};
int f() {
a_union t;
t.d = 3.0;
return t.i;
}
The practice of reading from a different union member than the one most recently written to (called ``type-punning'') is common. Even with -fstrict-aliasing, type-punning is allowed, provided the memory is accessed through the union type. So, the code above will work as expected. However, this code might not:
int f() {
a_union t;
int* ip;
t.d = 3.0;
ip = &t.i;
return *ip;
}
Use global dataflow analysis to identify and eliminate useless checks for null pointers. The compiler assumes that dereferencing a null pointer would have halted the program. If a pointer is checked after it has already been dereferenced, it cannot be null. In some environments, this assumption is not true, and programs can safely dereference null pointers. Use -fno-delete-null-pointer-checks to disable this optimization for programs which depend on that behavior. Enabled at levels -O2, -O3, -Os.
Reorder basic blocks in the compiled function in order to reduce number of taken branches and improve code locality. Enabled at levels -O2, -O3.
Reorder functions in the object file in order to improve code locality. This is implemented by using special subsections .text.hot for most frequently executed functions and .text.unlikely for unlikely executed functions. Reordering is done by the linker so object file format must support named sections and linker must place them in a reasonable way. Also profile feedback must be available to make this option effective. See -fprofile-arcs for details. Enabled at levels -O2, -O3, -Os.
Parse the whole compilation unit before starting to produce code. This allows some extra optimizations to take place but consumes more memory (in general). There are some compatibility issues with unit-at-a-time mode: * enabling unit-at-a-time mode may change the order in which functions, variables, and top-level asm statements are emitted, and will likely break code relying on some particular ordering. The majority of such top-level asm statements, though, can be replaced by section attributes. * unit-at-a-time mode removes unreferenced static variables and functions. This may result in undefined references when an asm statement refers directly to variables or functions that are otherwise unused. In that case either the variable/function shall be listed as an operand of the asm statement operand or, in the case of top-level asm statements the attribute used shall be used on the declaration. * Static functions now can use non-standard passing conventions that may break asm statements calling functions directly. Again, attribute used will prevent this behavior. As a temporary workaround, -fno-unit-at-a-time can be used, but this scheme may not be supported by future releases of GCC. Enabled at levels -O2, -O3.
Align the start of functions to the next power-of-two greater than n, skipping up to n bytes. For instance, -falign-functions=32 aligns functions to the next 32-byte boundary, but -falign-functions=24 would align to the next 32-byte boundary only if this can be done by skipping 23 bytes or less.
-fno-align-functions and -falign-functions=1 are equivalent and mean that functions will not be aligned.
Some assemblers only support this flag when n is a power of two; in that case, it is rounded up.
If n is not specified, use a machine-dependent default.
Align branch targets to a power-of-two boundary, for branch targets where the targets can only be reached by jumping, skipping up to n bytes like -falign-functions. In this case, no dummy operations need be executed.
Align loops to a power-of-two boundary, skipping up to n bytes like -falign-functions. The hope is that the loop will be executed many times, which will make up for any execution of the dummy operations.
-falign-labels=n Align all branch targets to a power-of-two boundary, skipping up to n bytes like -falign-functions. This option can easily make code slower, because it must insert dummy operations for when the branch target is reached in the usual flow of the code. -fno-align-labels and -falign-labels=1 are equivalent and mean that labels will not be aligned. If -falign-loops or -falign-jumps are applicable and are greater than this value, then their values are used instead. If n is not specified or is zero, use a machine-dependent default which is very likely to be `1', meaning no alignment. Enabled at levels -O2, -O3.
Perform Value Range Propagation on trees. This is similar to the constant propagation pass, but instead of values, ranges of values are propagated. This allows the optimizers to remove unnecessary range checks like array bound checks and null pointer checks. This is enabled by default at -O2 and higher. Null pointer check elimination is only done if -fdelete-null-pointer-checks is enabled.
Optimize. Optimizing compilation takes somewhat more time, and a lot more memory for a large function. With -O, the compiler tries to reduce code size and execution time, without performing any optimizations that take a great deal of compilation time. -O turns on the following optimization flags: -fno-defer-pop -fdelayed-branch -fno-guess-branch-probability -fcprop-registers -floop-optimize -fif-conversion -fif-conversion2 -ftree-ccp -ftree-dce -ftree-dominator-opts -ftree-dse -ftree-ter -ftree-lrs -ftree-sra -ftree-copyrename -ftree-fre -ftree-ch -fmerge-constants -O also turns on -fomit-frame-pointer on machines where doing so does not interfere with debugging.
Always pop the arguments to each function call as soon as that function returns. For machines which must pop arguments after a function call, the compiler normally lets arguments accumulate on the stack for several function calls and pops them all at once. -fno-defer-pop is disabled at levels -O, -O2, -O3, -Os.
If supported for the target machine, attempt to reorder instructions to exploit instruction slots available after delayed branch instructions. Enabled at levels -O, -O2, -O3, -Os.
Do not guess branch probabilities using heuristics. GCC will use heuristics to guess branch probabilities if they are not provided by profiling feedback (.-fprofile-arcs.). These heuristics are based on the control flow graph. If some branch probabilities are specified by __builtin_expect, then the heuristics will be used to guess branch probabilities for the rest of the control flow graph, taking the __builtin_expect info into account. The interactions between the heuristics and __builtin_expect can be complex, and in some cases, it may be useful to disable the heuristics so that the effects of __builtin_expect are easier to understand. The default is -fguess-branch-probability at levels -O, -O2, -O3, -Os.
After register allocation and post-register allocation instruction splitting, we perform a copy-propagation pass to try to reduce scheduling dependencies and occasionally eliminate the copy. -fno-cprop-registers is disabled at levels -O, -O2, -O3, -Os.
Perform loop optimizations: move constant expressions out of loops, simplify exit test conditions and optionally do strength-reduction as well. Enabled at levels -O, -O2, -O3, -Os.
Attempt to transform conditional jumps into branch-less equivalents. This include use of conditional moves, min, max, set flags and abs instructions, and some tricks doable by standard arithmetics. The use of conditional execution on chips where it is available is controlled by if-conversion2. Enabled at levels -O, -O2, -O3, -Os.
Use conditional execution (where available) to transform conditional jumps into branch-less equivalents. Enabled at levels -O, -O2, -O3, -Os.
Perform sparse conditional constant propagation (CCP) on trees. This pass only operates on local scalar variables and is enabled by default at -O and higher.
Perform dead code elimination (DCE) on trees. This flag is enabled by default at -O and higher.
Perform a variety of simple scalar cleanups (constant/copy propagation, redundancy elimination, range propagation and expression simplification) based on a dominator tree traversal. This also performs jump threading (to reduce jumps to jumps). This flag is enabled by default at -O and higher.
Perform dead store elimination (DSE) on trees. A dead store is a store into a memory location which will later be overwritten by another store without any intervening loads. In this case the earlier store can be deleted. This flag is enabled by default at .-O. and higher.
Perform temporary expression replacement during the SSA->normal phase. Single use/single def temporaries are replaced at their use location with their defining expression. This results in non-GIMPLE code, but gives the expanders much more complex trees to work on resulting in better RTL generation. This is enabled by default at -O and higher.
Perform live range splitting during the SSA->normal phase. Distinct live ranges of a variable are split into unique variables, allowing for better optimization later. This is enabled by default at -O and higher.
Perform scalar replacement of aggregates. This pass replaces structure references with scalars to prevent committing structures to memory too early. This flag is enabled by default at -O and higher.
Perform copy renaming on trees. This pass attempts to rename compiler temporaries to other variables at copy locations, usually resulting in variable names which more closely resemble the original variables. This flag is enabled by default at -O and higher.
Perform Full Redundancy Elimination (FRE) on trees. The difference between FRE and PRE is that FRE only considers expressions that are computed on all paths leading to the redundant computation. This analysis faster than PRE, though it exposes fewer redundancies. This flag is enabled by default at -O and higher.
Perform loop header copying on trees. This is beneficial since it increases effectiveness of code motion optimizations. It also saves one jump. This flag is enabled by default at -O and higher. It is not enabled for -Os, since it usually increases code size.
Attempt to merge identical constants (string constants and floating point constants) across compilation units. This option is the default for optimized compilation if the assembler and linker support it. Use -fno-merge-constants to inhibit this behavior. Enabled at levels -O, -O2, -O3, -Os.
submit = echo "$command" > run.sh ; $BIND bash run.sh
When running multiple copies of benchmarks, the SPEC config file feature submit is sometimes used to cause individual jobs to be bound to specific processors. This specific submit command is used for Linux. The description of the elements of the command are:
Flag description origin markings:
|
Indicates that the flag description came from the user flags file. |
|
Indicates that the flag description came from the suite-wide flags file. |
|
Indicates that the flag description came from a per-benchmark flags file. |
For questions about the meanings of these flags, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright 2006-2014 Standard Performance Evaluation Corporation
Tested with SPEC CPU2006 v1.0.
Report generated on Tue Jul 22 18:49:18 2014 by SPEC CPU2006 flags formatter v6906.