# Invocation command line: # /home/bsc/cpu2006/bin/runspec --config=BladeSymphony_int_rate -T all --reportable --rate --copies=8 int # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 Intel Linux64 config file # HITACHI BladeSymphony # Intel Composer XE for Linux64 action = validate tune = base ext = cpu2006.linux64.ic120.exe PATHSEP = / check_md5 = 1 reportable = 1 mean_anyway = 1 bench_post_setup = sync bind0 = numactl -m 0 --physcpubind=0 bind1 = numactl -m 1 --physcpubind=1 bind2 = numactl -m 0 --physcpubind=2 bind3 = numactl -m 1 --physcpubind=3 bind4 = numactl -m 0 --physcpubind=4 bind5 = numactl -m 1 --physcpubind=5 bind6 = numactl -m 0 --physcpubind=6 bind7 = numactl -m 1 --physcpubind=7 bind8 = numactl -m 0 --physcpubind=8 bind9 = numactl -m 1 --physcpubind=9 bind10 = numactl -m 0 --physcpubind=10 bind11 = numactl -m 1 --physcpubind=11 bind12 = numactl -m 0 --physcpubind=12 bind13 = numactl -m 1 --physcpubind=13 bind14 = numactl -m 0 --physcpubind=14 bind15 = numactl -m 1 --physcpubind=15 bind16 = numactl -m 0 --physcpubind=16 bind17 = numactl -m 1 --physcpubind=17 bind18 = numactl -m 0 --physcpubind=18 bind19 = numactl -m 1 --physcpubind=19 bind20 = numactl -m 0 --physcpubind=20 bind21 = numactl -m 1 --physcpubind=21 bind22 = numactl -m 0 --physcpubind=22 bind23 = numactl -m 1 --physcpubind=23 submit = echo "$command" > run.sh ; $BIND bash run.sh ##### Compiler section int=default=default=default: CC = icc -m32 CXX = icpc -m32 OBJ = .o SMARTHEAP_DIR = /home/bsc/smartheap/lib LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT ##### SSE4.2 SSE = -xSSE4.2 FAST = $(SSE) -ipo -O3 -no-prec-div -static FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div ##### Portability & libraries 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX ##### Tuning Flags default=base=default=default: sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -opt-prefetch CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch int=peak=default=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FAST) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FAST) -prof-use PASS1_LDOPT= PASS2_LDOPT= 401.bzip2=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -opt-prefetch -ansi-alias -auto-ilp32 PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FAST) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FAST) -prof-use PASS1_LDOPT= PASS2_LDOPT= 403.gcc=peak=default: COPTIMIZE = $(FASTNOSTATIC) feedback=0 429.mcf=peak=default: ####################################################################### %ifdef %{up-nhm} copies=4 %endif %ifdef %{dp-nhm} copies=8 %endif %ifdef %{up-wsm-6c} copies=6 %endif %ifdef %{dp-wsm-6c} copies=12 %endif %ifdef %{1p-nhm-ex} copies=8 %endif %ifdef %{2p-nhm-ex} copies=16 %endif %ifdef %{4p-nhm-ex} copies=32 %endif ####################################################################### 445.gobmk=peak=default: COPTIMIZE= -O2 -ipo -no-prec-div -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use PASS1_LDOPT= PASS2_LDOPT= 456.hmmer=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 feedback=no LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT ####################################################################### %ifdef %{up-nhm} copies=4 %endif %ifdef %{dp-nhm} copies=8 %endif %ifdef %{up-wsm-6c} copies=6 %endif %ifdef %{dp-wsm-6c} copies=12 %endif %ifdef %{1p-nhm-ex} copies=8 %endif %ifdef %{2p-nhm-ex} copies=16 %endif %ifdef %{4p-nhm-ex} copies=32 %endif ####################################################################### 458.sjeng=peak=default: CC= icc -m64 CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -unroll4 -auto-ilp32 PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -ansi-alias -opt-ra-region-strategy=block 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: basepeak=yes ################################################################# default=default=default=default: license_num = 35 test_sponsor = HITACHI hw_avail = Feb-2011 sw_avail = Jan-2011 tester = HITACHI hw_cpu_name = Intel Xeon E5603 hw_cpu_char = hw_cpu_mhz = 1600 hw_disk = 2 x 147 GB 10000 rpm SAS RAID1 configuration hw_fpu = Integrated hw_memory000 = 48 GB (6 x 8 GB 2Rx4 PC3-10600R-9, ECC, hw_memory001 = running at 1066 MHz) hw_model = BladeSymphony BS320 (Intel Xeon E5603) hw_ncpuorder = 1, 2 chips hw_ncores = 8 hw_nchips = 2 hw_ncoresperchip = 4 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 4 MB I+D on chip per chip hw_ocache = None hw_vendor = HITACHI prepared_by = HITACHI sw_file = ext3 sw_os000 = Red Hat Enterprise Linux sw_os001 = Server release 5.4.3, Advanced Platform, sw_os002 = Kernel 2.6.18-164.9.1.el5 on an x86_64 sw_state = Run level 3 (multi-user) sw_other = Microquill SmartHeap V8.1 int=default=default=default: sw_compiler000 = Intel C++ Compiler XE for Linux sw_compiler001 = Version 12.0.2.137 Build 20110112 notes_submit_000= '/usr/bin/numactl' used to bind processes to CPUs notes_plat_000= BIOS Settings: notes_plat_005= Data Reuse Optimization = Disabled notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run notes_os_005= Hugepages was enabled with the following: notes_os_010= 'nodev /mnt/hugepages hugetlbfs defaults 0 0' added to /etc/fstab notes_os_015= echo 10800 > /proc/sys/vm/nr_hugepages notes_os_020= export HUGETLB_MORECORE=yes notes_os_025= export LD_PRELOAD=/usr/lib64/libhugetlbfs.so # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic12.0-linux64-revB.xml flagsurl001 = http://www.spec.org/cpu2006/flags/PlatformHitachi.xml