# Invocation command line: # /root/CPU2006-1.2/bin/runspec --define external -c cpu2006.1.2.ic12.1rc1.linux64.avx.speed.17aug2011.cfg --define cores=16 --define THP_enabled --define drop_caches -o all int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 12.1 # Operating system version: 64-Bit RedHat Enterprise Linux64 5.5 # Hardware: Intel processors supporting AVX # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # Aug 2011 Intel Compiler 12.1 for Linux64 ############################################################################ action = validate tune = base,peak %define version 17aug2011 ext = cpu2006.1.2.ic12.1rc1.linux64.avx.speed.%{version} fail_build = 1 PATHSEP = / check_md5=1 reportable=1 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6800 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20111122.xml %ifdef %{external} flagsurl001=http://www.spec.org/cpu2006/flags/Dell-Platform-Settings-V1.2-revA.20120328.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64 preENV_OMP_NUM_THREADS = %{cores} preENV_KMP_AFFINITY = granularity=fine,scatter # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /smartheap SMARTHEAP64_DIR = /smartheap fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xAVX FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div -static ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ ################################################################ # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language ################################################################ 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST) -parallel -opt-prefetch COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias CXXOPTIMIZE= $(FAST) -opt-prefetch -ansi-alias ################################################################ # Peak Tuning Flags int 2005 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m32 PORTABILITY= CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -opt-prefetch -ansi-alias 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias 403.gcc=peak=default: COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32 feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: CC= icc -m32 PORTABILITY= COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 -ansi-alias feedback=0 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: CC= icc -m32 PORTABILITY= COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXX= icpc -m32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: CXX= icpc -m32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -ansi-alias feedback=no ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -auto-ilp32 -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: OPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -parallel -static feedback=0 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- -static 433.milc=peak=default: OPTIMIZE= -static 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: OPTIMIZE= $(FASTNOSTATIC) feedback=0 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -opt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -opt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: OPTIMIZE= $(FASTNOSTATIC) COPTIMIZE= -unroll2 -ansi-alias -parallel feedback=no ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 20 test_sponsor = Bull SAS hw_avail = Mar-2012 sw_avail = Feb-2012 tester = Dell Inc. hw_cpu_name = Intel Xeon E5-2670 hw_cpu_char = Intel Turbo Boost Technology up to 3.30 GHz hw_cpu_mhz = 2600 hw_disk = 500 GB SATA, 7.2 K RPM hw_fpu = Integrated hw_memory = 128 GB (16 x 8 GB 2Rx4 PC3-12800R-11, ECC) hw_model = NovaScale T840 F3 (Intel Xeon E5-2670, 2.60 GHz) hw_ncpuorder = 1,2 chip hw_ncores = 16 hw_nchips = 2 hw_ncoresperchip = 8 hw_nthreadspercore = 2 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_vendor = Bull SAS prepared_by = Dell Inc. sw_file = EXT3 sw_os001 = SLES 11 SP2 RC3 sw_os002 = Kernel 3.0.13-0.9-default x86_64 sw_state = Run level 3 (multi-user) notes_025 = the Bull NovaScale T840 F3 models are electronically equivalent. notes_030 = The results have been measured on a Dell PowerEdge T620 model notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_plat_form_000= System Profile set to Custom notes_plat_form_005= CPU Power Management set to Maximum Performance notes_plat_form_010= Memory Frequency set to Maximum Performance notes_plat_form_015= Turbo Boost set to Enabled notes_plat_form_020 = C States/C1E set to Enabled int=default=default=default: sw_compiler000 = C/C++: Version 12.1.0.225 of Intel C++ Studio XE sw_compiler001 = for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V9.01 default: %ifdef %{THP_enabled} notes_035 = Transparent Huge Pages enabled with: notes_040 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_045 = Filesystem page cache cleared with: notes_050 = echo 1> /proc/sys/vm/drop_caches notes_055 = Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RHEL5.5 %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 12.1.0.225 of Intel C++ Studio XE sw_compiler002 = for Linux; sw_compiler004 = Fortran: Version 12.1.0.225 of Intel Fortran sw_compiler005 = Studio XE for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6800' default: notes_plat_sysinfo_000 = Sysinfo program /root/CPU2006-1.2/config/sysinfo.rev6800 notes_plat_sysinfo_005 = $Rev: 6800 $ $Date:: 2011-10-11 #$ 6f2ebdff5032aaa42e583f96b07f99d3 notes_plat_sysinfo_010 = running on Miller Mon Feb 13 14:12:40 2012 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2670 0 @ 2.60GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 32 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 132122692 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 11 (x86_64) notes_plat_sysinfo_160 = VERSION = 11 notes_plat_sysinfo_165 = PATCHLEVEL = 2 notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = uname -a: notes_plat_sysinfo_180 = Linux Miller 3.0.13-0.9-default #1 SMP Mon Jan 16 17:33:03 UTC 2012 (54ddfaf) notes_plat_sysinfo_185 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_190 = notes_plat_sysinfo_195 = run-level 3 Feb 13 14:10 last=S notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = SPEC is set to: /root/CPU2006-1.2 notes_plat_sysinfo_210 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_215 = /dev/sda1 ext3 99G 55G 39G 59% / notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = Additional information from dmidecode: notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2670 hw_disk = 1 x 500 GB 7200 RPM SATA hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = ext3 sw_os000 = SUSE Linux Enterprise Server 11 SP2 (x86_64) sw_os001 = 3.0.13-0.9-default sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 483.xalancbmk: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,scatter" notes_010 =LD_LIBRARY_PATH = "/root/CPU2006-1.2/libs/32:/root/CPU2006-1.2/libs/64" notes_015 =OMP_NUM_THREADS = "16" notes_020 = The Dell PowerEdge T620 and