# Invocation command line: # /work/cpu2006/bin/runspec -c CFP-Speed-AVX-static.cfg --define cores=16 --define THP_enabled -i ref -n 3 -T all -o all fp # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 12.1 # Operating system version: 64-Bit RedHat Enterprise Linux64 5.5 # Hardware: Intel processors supporting AVX # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # Aug 2011 Intel Compiler 12.1 for Linux64 ############################################################################ action = validate tune = base,peak %define version 10feb2012 ext = cpu2006.1.2.ic12.1rc1.linux64.avx_s.speed.%{version} # fail_build = 1 PATHSEP = / check_md5=1 reportable=1 mean_anyway=1 use_submit_for_speed=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6800 -f -p flagsurl000= http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20111122.xml flagsurl001= http://www.spec.org/cpu2006/flags/Fujitsu-Platform.20120313.xml # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64 preENV_OMP_NUM_THREADS = %{cores} preENV_KMP_AFFINITY = granularity=fine,scatter # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /opt/SmartHeap/lib SMARTHEAP64_DIR = /opt/SmartHeap/lib64 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xAVX FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div -static ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ ################################################################ # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language ################################################################ 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST) -parallel -opt-prefetch COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias CXXOPTIMIZE= $(FAST) -opt-prefetch -ansi-alias ################################################################ # Peak Tuning Flags int 2005 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench=peak=default: CC= icc -m32 PORTABILITY= CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -opt-prefetch -ansi-alias 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias 403.gcc=peak=default: COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32 feedback=0 429.mcf=peak=default: basepeak=yes 445.gobmk=peak=default: CC= icc -m32 PORTABILITY= COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 -ansi-alias feedback=0 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: CC= icc -m32 PORTABILITY= COPTIMIZE= -unroll2 -ansi-alias 471.omnetpp=peak=default: CXX= icpc -m32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: basepeak=yes 483.xalancbmk=peak=default: CXX= icpc -m32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -ansi-alias feedback=no ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -auto-ilp32 -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: OPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -parallel -static feedback=0 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- -static submit = numactl -m 0 -N 0 $command 433.milc=peak=default: OPTIMIZE= -static submit = numactl -m 0 -N 0 $command 434.zeusmp=peak=default: # basepeak=yes FOPTIMIZE= $(FAST) -parallel -opt-prefetch feedback=0 submit = numactl --interleave=all $command 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: # basepeak=yes FOPTIMIZE= $(FAST) -parallel -opt-prefetch COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias feedback=0 437.leslie3d=peak=default: # basepeak=yes FOPTIMIZE= $(FAST) -parallel -opt-prefetch feedback=0 submit = numactl --interleave=all $command 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: CXXOPTIMIZE= -xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -ansi-alias -static feedback=no submit = numactl -m 0 -N 0 $command 450.soplex=peak=default: # basepeak=yes CXXOPTIMIZE= $(FAST) -opt-prefetch -ansi-alias feedback=0 submit = numactl -m 0 -N 0 $command 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias submit = numactl -m 0 -N 0 $command 454.calculix=peak=default: OPTIMIZE= $(FASTNOSTATIC) feedback=0 459.GemsFDTD=peak=default: PASS2_FFLAGS= -xSSE4.2 -ipo -O3 -no-prec-div -prof-use PASS2_LDFLAGS = -xSSE4.2 -ipo -O3 -no-prec-div -prof-use OPTIMIZE= -unroll2 -inline-level=0 -opt-prefetch -parallel submit = numactl --interleave=all $command 465.tonto=peak=default: OPTIMIZE= -inline-calloc -opt-malloc-options=3 -auto -unroll4 submit = numactl -m 0 -N 0 $command 470.lbm=peak=default: # basepeak=yes COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias feedback=0 submit = numactl --interleave=all $command 481.wrf=peak=default: # basepeak=yes FOPTIMIZE= $(FAST) -parallel -opt-prefetch COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias feedback=0 submit = numactl --interleave=all $command 482.sphinx3=peak=default: OPTIMIZE= $(FASTNOSTATIC) COPTIMIZE= -unroll2 -ansi-alias -parallel feedback=no #include: SUT.conf # ----- Begin inclusion of 'SUT.conf' ############################################################################ default=default=default=default: license_num = 19 test_sponsor = Fujitsu hw_avail = Mar-2012 sw_avail = Dec-2011 tester = Fujitsu ######################################## hw_cpu_name = Intel Xeon E5-2665 hw_cpu_char = Intel Turbo Boost Technology up to 3.10 GHz hw_cpu_mhz = 2400 hw_model = CELSIUS R920 (Intel Xeon E5-2665) hw_ncpuorder = 1,2 chips hw_ncores = 16 hw_nchips = 2 hw_ncoresperchip = 8 hw_nthreadspercore = 1 notes_plat_005 = Hyper-Threading Technology = Disabled # Einziges BIOS setting? hw_tcache = 20 MB I+D on chip per chip hw_memory = 128 GB (16 x 8 GB 2Rx8 PC3-12800R-11, ECC) hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_ocache = None hw_disk = 1 x SATA III, 500 GB, 7200 rpm hw_fpu = Integrated hw_other = None hw_vendor = Fujitsu ######################################## prepared_by = Fujitsu sw_file = ReiserFS sw_os000 = Red Hat Enterprise Linux Server release 6.1, sw_os001 = 2.6.32-131.0.15.el6.x86_64 sw_state = Run level 3 (multi - user) ######################################## notes_plat_000 = BIOS settings: # 020 reserviert fuer Ht (s.o.) notes_plat_010 = Frequency Floor Override = Enabled # notes_submit_010 = The config file option 'submit' was used. # notes_submit_020 = 'numactl' was used to bind copies to the cores. # notes_submit_030 = See the configuration file for details. # notes_submit_040 = For full details on using numactl, please refer to your Linux documentation, 'man numactl' # ---- End inclusion of '/work/cpu2006/config/SUT.conf' notes_040 = Added glibc-static-2.12-1.25.el6.x86_64.rpm notes_045 = to enable static linking notes_050 = notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler001 = C/C++: Version 12.1.2.273 of Intel C++ Studio XE sw_compiler002 = for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other001 = SmartHeap 10.0 32-bit Library for Linux default: %ifdef %{THP_enabled} notes_055 = Transparent Huge Pages enabled with: notes_060 = echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler000 = C/C++: Version 12.1.2.273 of Intel C++ Studio XE sw_compiler001 = for Linux; sw_compiler002 = Fortran: Version 12.1.2.273 of Intel Fortran sw_compiler003 = Studio XE for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit sw_other = None # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6800 -f -p' default: # Sysinfo program /work/cpu2006/config/sysinfo.rev6800 # $Rev: 6800 $ $Date:: 2011-10-11 #$ 6f2ebdff5032aaa42e583f96b07f99d3 # running on localhost Mon Mar 19 14:29:56 2012 # # This section contains SUT (System Under Test) info as seen by # some common utilities. To remove or add to this section, see: # http://www.spec.org/cpu2006/Docs/config.html#sysinfo # # From /proc/cpuinfo # model name : Intel(R) Xeon(R) CPU E5-2665 0 @ 2.40GHz # 2 "physical id"s (chips) # 16 "processors" # cores, siblings (Caution: counting these is hw and system dependent. The # following excerpts from /proc/cpuinfo might not be reliable. Use with # caution.) # cpu cores : 8 # siblings : 8 # physical 0: cores 0 1 2 3 4 5 6 7 # physical 1: cores 0 1 2 3 4 5 6 7 # cache size : 20480 KB # # From /proc/meminfo # MemTotal: 132217808 kB # HugePages_Total: 0 # Hugepagesize: 2048 kB # # /usr/bin/lsb_release -d # Red Hat Enterprise Linux Server release 6.1 (Santiago) # # From /etc/*release* /etc/*version* # redhat-release: Red Hat Enterprise Linux Server release 6.1 (Santiago) # system-release: Red Hat Enterprise Linux Server release 6.1 (Santiago) # system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server # # uname -a: # Linux localhost 2.6.32-131.0.15.el6.x86_64 #1 SMP Tue May 10 15:42:40 EDT # 2011 x86_64 x86_64 x86_64 GNU/Linux # # run-level 3 Mar 19 14:26 # # SPEC is set to: /work/cpu2006 # Filesystem Type Size Used Avail Use% Mounted on # /dev/sda3 ext4 206G 78G 118G 40% /work # # Additional information from dmidecode: # Memory: # 16x Samsung M393B1K70DH0- 8 GB 1600 MHz 1 rank # # (End of data from sysinfo program) # hw_cpu_name = Intel Xeon E5-2665 0 # hw_disk = 206 GB add more disk info here # hw_memory001 = 126.093 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 2 # prepared_by = root (is never output, only tags rawfile) # sw_file = ext4 # sw_os001 = Red Hat Enterprise Linux Server release 6.1 (Santiago) # sw_os002 = 2.6.32-131.0.15.el6.x86_64 # sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,scatter" notes_010 =LD_LIBRARY_PATH = "/work/cpu2006/libs/32:/work/cpu2006/libs/64" notes_015 =OMP_NUM_THREADS = "16" notes_020 = notes_025 = Binaries compiled on a system with notes_030 = 2x Xeon E5-2690 CPU + 64 GB memory using notes_035 = Red Hat Enterprise Linux Server release 6.1 (Santiago) notes_submit_000 = The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. notes_submit_015 = For full details on using numactl, please refer to your Linux documentation, 'man numactl'