SPEC(R) CFP2006 Summary Supermicro SuperServer 6018R-TDTP (X10DRD-LTP , Intel Xeon E5-2618L v4) Fri May 27 08:34:06 2016 CPU2006 License: 001176 Test date: May-2016 Test sponsor: Supermicro Hardware availability: Mar-2016 Tested by: Supermicro Software availability: Sep-2015 Base Base Base Peak Peak Peak Benchmarks Copies Run Time Rate Copies Run Time Rate -------------- ------ --------- --------- ------ --------- --------- 410.bwaves 40 993 548 S 40 993 548 S 410.bwaves 40 993 547 * 40 993 547 * 410.bwaves 40 993 547 S 40 993 547 S 416.gamess 40 1207 649 * 40 1169 670 * 416.gamess 40 1207 649 S 40 1169 670 S 416.gamess 40 1207 649 S 40 1173 668 S 433.milc 40 691 532 S 40 691 532 S 433.milc 40 690 532 * 40 690 532 * 433.milc 40 690 532 S 40 690 532 S 434.zeusmp 40 477 763 * 40 477 763 * 434.zeusmp 40 480 758 S 40 480 758 S 434.zeusmp 40 477 763 S 40 477 763 S 435.gromacs 40 357 800 S 40 340 839 S 435.gromacs 40 358 798 * 40 343 833 S 435.gromacs 40 358 797 S 40 341 837 * 436.cactusADM 40 547 873 S 40 547 873 S 436.cactusADM 40 545 877 S 40 545 877 S 436.cactusADM 40 545 877 * 40 545 877 * 437.leslie3d 40 982 383 S 40 982 383 S 437.leslie3d 40 981 383 S 40 981 383 S 437.leslie3d 40 982 383 * 40 982 383 * 444.namd 40 591 543 S 40 589 545 * 444.namd 40 592 542 * 40 590 544 S 444.namd 40 595 540 S 40 589 545 S 447.dealII 40 418 1090 * 40 418 1090 * 447.dealII 40 420 1090 S 40 420 1090 S 447.dealII 40 417 1100 S 40 417 1100 S 450.soplex 40 856 390 S 20 401 416 S 450.soplex 40 853 391 S 20 402 415 * 450.soplex 40 855 390 * 20 402 415 S 453.povray 40 250 850 * 40 212 1000 S 453.povray 40 250 850 S 40 215 990 S 453.povray 40 250 851 S 40 212 1000 * 454.calculix 40 323 1020 * 40 323 1020 * 454.calculix 40 323 1020 S 40 323 1020 S 454.calculix 40 321 1030 S 40 321 1030 S 459.GemsFDTD 40 1147 370 S 40 1147 370 S 459.GemsFDTD 40 1147 370 * 40 1147 370 * 459.GemsFDTD 40 1147 370 S 40 1147 370 S 465.tonto 40 571 690 S 40 535 736 S 465.tonto 40 571 690 * 40 534 737 * 465.tonto 40 571 689 S 40 533 738 S 470.lbm 40 749 734 S 40 749 734 S 470.lbm 40 749 733 S 40 749 733 S 470.lbm 40 749 734 * 40 749 734 * 481.wrf 40 689 648 S 40 689 648 S 481.wrf 40 687 650 S 40 687 650 S 481.wrf 40 688 649 * 40 688 649 * 482.sphinx3 40 1239 629 * 40 1239 629 * 482.sphinx3 40 1244 627 S 40 1244 627 S 482.sphinx3 40 1238 630 S 40 1238 630 S ============================================================================== 410.bwaves 40 993 547 * 40 993 547 * 416.gamess 40 1207 649 * 40 1169 670 * 433.milc 40 690 532 * 40 690 532 * 434.zeusmp 40 477 763 * 40 477 763 * 435.gromacs 40 358 798 * 40 341 837 * 436.cactusADM 40 545 877 * 40 545 877 * 437.leslie3d 40 982 383 * 40 982 383 * 444.namd 40 592 542 * 40 589 545 * 447.dealII 40 418 1090 * 40 418 1090 * 450.soplex 40 855 390 * 20 402 415 * 453.povray 40 250 850 * 40 212 1000 * 454.calculix 40 323 1020 * 40 323 1020 * 459.GemsFDTD 40 1147 370 * 40 1147 370 * 465.tonto 40 571 690 * 40 534 737 * 470.lbm 40 749 734 * 40 749 734 * 481.wrf 40 688 649 * 40 688 649 * 482.sphinx3 40 1239 629 * 40 1239 629 * SPECfp(R)_rate_base2006 646 SPECfp_rate2006 660 HARDWARE -------- CPU Name: Intel Xeon E5-2618L v4 CPU Characteristics: Intel Turbo Boost Technology up to 3.20 GHz CPU MHz: 2200 FPU: Integrated CPU(s) enabled: 20 cores, 2 chips, 10 cores/chip, 2 threads/core CPU(s) orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core L3 Cache: 25 MB I+D on chip per chip Other Cache: None Memory: 256 GB (8 x 32 GB 2Rx4 PC4-2400T-R, running at 2133 MHz) Disk Subsystem: 1 x 400 GB SATA III SSD Other Hardware: None SOFTWARE -------- Operating System: Red Hat Enterprise Linux Server release 7.2, Kernel 3.10.0-327.el7.x86_64 Compiler: C/C++: Version 16.0.0.101 of Intel C++ Studio XE for Linux; Fortran: Version 16.0.0.101 of Intel Fortran Studio XE for Linux Auto Parallel: No File System: xfs System State: Run level 3 (multi-user) Base Pointers: 32/64-bit Peak Pointers: 32/64-bit Other Software: None Submit Notes ------------ The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file. Operating System Notes ---------------------- Stack size set to unlimited using "ulimit -s unlimited" Platform Notes -------------- BIOS Settings: Early Snoop = Disable Sysinfo program /home/cpu2006_ic16/config/sysinfo.rev6914 $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 running on localhost.localdomain Fri May 27 20:34:07 2016 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) CPU E5-2618L v4 @ 2.20GHz 2 "physical id"s (chips) 40 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 10 siblings : 20 physical 0: cores 0 1 2 3 4 8 9 10 11 12 physical 1: cores 0 1 2 3 4 8 9 10 11 12 cache size : 25600 KB From /proc/meminfo MemTotal: 263860080 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux Server" VERSION="7.2 (Maipo)" ID="rhel" ID_LIKE="fedora" VERSION_ID="7.2" PRETTY_NAME="Red Hat Enterprise Linux Server 7.2 (Maipo)" ANSI_COLOR="0;31" CPE_NAME="cpe:/o:redhat:enterprise_linux:7.2:GA:server" redhat-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) system-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) system-release-cpe: cpe:/o:redhat:enterprise_linux:7.2:ga:server uname -a: Linux localhost.localdomain 3.10.0-327.el7.x86_64 #1 SMP Thu Oct 29 17:29:29 EDT 2015 x86_64 x86_64 x86_64 GNU/Linux run-level 3 May 27 08:29 SPEC is set to: /home/cpu2006_ic16 Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/rhel-home xfs 216G 39G 178G 18% /home Additional information from dmidecode: Warning: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. BIOS American Megatrends Inc. 2.0 02/26/2016 Memory: 8x Micron 36ASF4G72PZ-2G3A1 32 GB 2 rank 2400 MHz, configured at 2133 MHz (End of data from sysinfo program) General Notes ------------- Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/home/cpu2006_ic16/libs/32:/home/cpu2006_ic16/libs/64:/home/cpu2006_ic16/sh" Binaries compiled on a system with 1x Intel Core i5-4670K CPU + 32GB memory using RedHat EL 7.1 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec Base Compiler Invocation ------------------------ C benchmarks: icc -m64 C++ benchmarks: icpc -m64 Fortran benchmarks: ifort -m64 Benchmarks using both Fortran and C: icc -m64 ifort -m64 Base Portability Flags ---------------------- 410.bwaves: -DSPEC_CPU_LP64 416.gamess: -DSPEC_CPU_LP64 433.milc: -DSPEC_CPU_LP64 434.zeusmp: -DSPEC_CPU_LP64 435.gromacs: -DSPEC_CPU_LP64 -nofor_main 436.cactusADM: -DSPEC_CPU_LP64 -nofor_main 437.leslie3d: -DSPEC_CPU_LP64 444.namd: -DSPEC_CPU_LP64 447.dealII: -DSPEC_CPU_LP64 450.soplex: -DSPEC_CPU_LP64 453.povray: -DSPEC_CPU_LP64 454.calculix: -DSPEC_CPU_LP64 -nofor_main 459.GemsFDTD: -DSPEC_CPU_LP64 465.tonto: -DSPEC_CPU_LP64 470.lbm: -DSPEC_CPU_LP64 481.wrf: -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 482.sphinx3: -DSPEC_CPU_LP64 Base Optimization Flags ----------------------- C benchmarks: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias -opt-mem-layout-trans=3 C++ benchmarks: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias -opt-mem-layout-trans=3 Fortran benchmarks: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch Benchmarks using both Fortran and C: -xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -auto-p32 -ansi-alias -opt-mem-layout-trans=3 Peak Compiler Invocation ------------------------ C benchmarks: icc -m64 C++ benchmarks (except as noted below): icpc -m64 450.soplex: icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin Fortran benchmarks: ifort -m64 Benchmarks using both Fortran and C: icc -m64 ifort -m64 Peak Portability Flags ---------------------- 410.bwaves: -DSPEC_CPU_LP64 416.gamess: -DSPEC_CPU_LP64 433.milc: -DSPEC_CPU_LP64 434.zeusmp: -DSPEC_CPU_LP64 435.gromacs: -DSPEC_CPU_LP64 -nofor_main 436.cactusADM: -DSPEC_CPU_LP64 -nofor_main 437.leslie3d: -DSPEC_CPU_LP64 444.namd: -DSPEC_CPU_LP64 447.dealII: -DSPEC_CPU_LP64 450.soplex: -D_FILE_OFFSET_BITS=64 453.povray: -DSPEC_CPU_LP64 454.calculix: -DSPEC_CPU_LP64 -nofor_main 459.GemsFDTD: -DSPEC_CPU_LP64 465.tonto: -DSPEC_CPU_LP64 470.lbm: -DSPEC_CPU_LP64 481.wrf: -DSPEC_CPU_LP64 -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 482.sphinx3: -DSPEC_CPU_LP64 Peak Optimization Flags ----------------------- C benchmarks: 433.milc: basepeak = yes 470.lbm: basepeak = yes 482.sphinx3: basepeak = yes C++ benchmarks: 444.namd: -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -fno-alias -auto-ilp32 447.dealII: basepeak = yes 450.soplex: -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -opt-malloc-options=3 453.povray: -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -unroll4 -ansi-alias Fortran benchmarks: 410.bwaves: basepeak = yes 416.gamess: -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -prof-use(pass 2) -unroll2 -inline-level=0 -scalar-rep- 434.zeusmp: basepeak = yes 437.leslie3d: basepeak = yes 459.GemsFDTD: basepeak = yes 465.tonto: -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -prof-use(pass 2) -unroll4 -auto -inline-calloc -opt-malloc-options=3 Benchmarks using both Fortran and C: 435.gromacs: -xCORE-AVX2(pass 2) -prof-gen:threadsafe(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -par-num-threads=1(pass 1) -opt-mem-layout-trans=3(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 436.cactusADM: basepeak = yes 454.calculix: basepeak = yes 481.wrf: basepeak = yes The flags files that were used to format this result can be browsed at http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.html http://www.spec.org/cpu2006/flags/Supermicro-Platform-Settings-V1.2-revH.html You can also download the XML flags sources by saving the following links: http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.xml http://www.spec.org/cpu2006/flags/Supermicro-Platform-Settings-V1.2-revH.xml SPEC and SPECfp are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 2006-2016 Standard Performance Evaluation Corporation Tested with SPEC CPU2006 v1.2. Report generated on Thu Jun 30 14:07:14 2016 by CPU2006 ASCII formatter v6932. Originally published on 14 June 2016.