# Invocation command line: # /cpu2006.1.2/bin/runspec --define default-platform-flags -c cpu2006-1.2-ic17.0-lin-core-avx2-speed-20160922.cfg --define cores=20 --tune base,peak -o pdf int # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 precompiled subbenchmark config file # 20160922 Intel(R) C/C++ and Fortran 17.0 Compilers for Linux ############################################################################ ############################################################################ # This is config file targets: # # Compiler name/version: Intel(R) C/C++ and Fortran 17.0 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.2, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # ############################################################################ # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20160922 ext = cpu2006-1.2-ic17.0-lin-core-avx2-speed-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate tune = base,peak PATHSEP = / makeflags= -j8 check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6993 use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic17.0-official-linux64.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2006/flags/ACTION.SA-Platform-Flags-RevB-aug-2015-For-Intel-Platform.xml #flagsurl2=ACTION.SA-Platform-Flags-RevD-aug-2015-For-Supermicro-Platform.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh10.2 # Set some environment variables preENV_OMP_NUM_THREADS = %{cores} %ifdef %{intspeed} preENV_KMP_AFFINITY = granularity=fine,scatter %else preENV_KMP_AFFINITY = granularity=fine,compact,1,0 %endif int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /sh10.2 SMARTHEAP64_DIR = /sh10.2 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler Global Tuning Options #################################################################### default: SSE = -xCORE-AVX2 FAST_NO_STATIC = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch -auto-p32 CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch COPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCXXFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCXXFLAGS = -prof-use $(FAST_NO_STATIC) 400.perlbench,401.bzip2,429.mcf,445.gobmk,458.sjeng,464.h264ref,471.omnetpp,473.astar,483.xalancbmk=peak: submit = taskset -c $SPECCOPYNUM $command 400.perlbench=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -qopt-prefetch 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -qopt-prefetch -no-prec-div 403.gcc=peak=default: feedback=0 COPTIMIZE= -inline-calloc -qopt-malloc-options=3 -auto-ilp32 OPTIMIZE= $(FAST_NO_STATIC) 429.mcf=peak=default: feedback=0 COPTIMIZE= -parallel -qopt-prefetch -auto-p32 OPTIMIZE= $(FAST_NO_STATIC) 445.gobmk=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= 456.hmmer=peak=default: basepeak=yes 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: basepeak=yes 471.omnetpp=peak=default: CXX= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -qopt-ra-region-strategy=block 473.astar=peak=default: feedback=0 CXXOPTIMIZE= -qopt-prefetch -auto-p32 OPTIMIZE= $(FAST_NO_STATIC) 483.xalancbmk=peak=default: feedback=0 CXX= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -qopt-prefetch OPTIMIZE= $(FAST_NO_STATIC) ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_FFLAGS = -prof-gen -par-num-threads=1 PASS2_FFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDFLAGS = -prof-gen -par-num-threads=1 PASS2_LDFLAGS = -prof-use $(FAST_NO_STATIC) 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -qopt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -qopt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 9008 test_sponsor = ACTION S.A. hw_avail = Mar-2016 sw_avail = Mar-2016 tester = ACTION S.A. hw_cpu_name = Intel Xeon E5-2640 v4 hw_cpu_char000 = hw_cpu_char001 = Intel Turbo Boost Technology up to 3.40 GHz hw_cpu_mhz = 2400 hw_disk001 = 1 x 240 GB SATA II SSD hw_fpu = Integrated hw_memory5 = 256 GB (16 x 16 GB 2Rx4 PC4-2400P-R, running at 2133 MHz) hw_memory4 = 64 GB (8 x 8 GB 2Rx4 PC4-2133P-R) hw_memory010 = 256 GB (16 x 16 GB 2Rx4 PC4-2400T-R, running at hw_memory011 = 2133 MHz) hw_model000 = ACTINA SOLAR 210 X6 (Intel Xeon E5-2640 v4, 2.40 hw_model001 = GHz) hw_ncpuorder = 1,2 chips hw_ncores = 20 hw_nchips = 2 hw_ncoresperchip = 10 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 25 MB I+D on chip per chip hw_ocache = None hw_vendor = ACTION S.A. prepared_by001 = ACTION S.A. sw_file = ext4 sw_os001 = Red Hat Enterprise Linux Server release 7.2 sw_os002 = (Maipo) sw_state001 = Run level 3 (multi-user) notes_025 = Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM notes_030 = memory using Redhat Enterprise Linux 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_plat_000 = notes_plat_005 = Bios Settings: notes_plat_010 = Intel(R) Hyper-Threading Tech = Disabled notes_plat_015 = Power & Performance = Performance notes_plat_020 = Enforce POR = Disabled notes_plat_025 = Memory Operating Speed Selection = 2133 notes_plat_030 = Set FAN Profile = Performance notes_plat_035 = Fan PWM Offset = 0 notes_plat_040 = notes_plat_update_000 = dmidecode does not properly detect memory modules notes_plat_update_005 = 16 modules of 16 GB were used to run the test (256 GB total) int=default=default=default: sw_compiler000 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler001 = Compiler for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V10.2 default: %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_035 = Transparent Huge Pages enabled by default. %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif #notes_cross_100 = Binaries compiled on a system with 2x Xeon E5-2650 v4 chips + 256 GB memory #notes_cross_110 = using RedHat EL 7.2 fp=default=default=default: sw_compiler001 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler002 = Compiler for Linux; sw_compiler004 = Fortran: Version 17.0.0.098 of Intel Fortran sw_compiler005 = Compiler for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit ######################################################################################################## # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6993' default: notes_plat_sysinfo_000 = Sysinfo program /cpu2006.1.2/config/sysinfo.rev6993 notes_plat_sysinfo_005 = Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1) notes_plat_sysinfo_010 = running on SUT Thu Nov 24 18:43:34 2016 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2640 v4 @ 2.40GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 20 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 10 notes_plat_sysinfo_080 = siblings : 10 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 8 9 10 11 12 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 8 9 10 11 12 notes_plat_sysinfo_095 = cache size : 25600 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 263860776 kB notes_plat_sysinfo_115 = HugePages_Total: 1 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = From /etc/*release* /etc/*version* notes_plat_sysinfo_135 = os-release: notes_plat_sysinfo_140 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_145 = VERSION="7.2 (Maipo)" notes_plat_sysinfo_150 = ID="rhel" notes_plat_sysinfo_155 = ID_LIKE="fedora" notes_plat_sysinfo_160 = VERSION_ID="7.2" notes_plat_sysinfo_165 = PRETTY_NAME="Red Hat Enterprise Linux" notes_plat_sysinfo_170 = ANSI_COLOR="0;31" notes_plat_sysinfo_175 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.2:GA:server" notes_plat_sysinfo_180 = os-release.rpmsave: notes_plat_sysinfo_185 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_190 = VERSION="7.0 (Maipo)" notes_plat_sysinfo_195 = ID="rhel" notes_plat_sysinfo_200 = ID_LIKE="fedora" notes_plat_sysinfo_205 = VERSION_ID="7.0" notes_plat_sysinfo_210 = PRETTY_NAME="Red Hat Enterprise Linux" notes_plat_sysinfo_215 = ANSI_COLOR="0;31" notes_plat_sysinfo_220 = CPE_NAME="cpe:/o:redhat:enterprise_linux:7.0:GA:server" notes_plat_sysinfo_225 = redhat-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_230 = system-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_235 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.2:ga:server notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux SUT 3.10.0-327.18.2.el7.x86_64 #2 SMP Wed Jun 1 17:37:13 CEST 2016 notes_plat_sysinfo_255 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Nov 24 09:21 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /cpu2006.1.2 notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/sda1 ext4 212G 45G 157G 23% / notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = BIOS Intel Corporation SE5C610.86B.01.01.0019.101220160604 10/12/2016 notes_plat_sysinfo_330 = Memory: notes_plat_sysinfo_335 = 16x Hynix HMA42GR7AFR4N-UH 16 GB 2 rank 2400 MHz, configured at 2134 MHz notes_plat_sysinfo_340 = 8x NO DIMM NO DIMM notes_plat_sysinfo_345 = notes_plat_sysinfo_350 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2640 v4 hw_nchips = 2 sw_file = ext4 sw_os000 = Red Hat Enterprise Linux Server release 7.2 sw_os001 = (Maipo) sw_os002 = 3.10.0-327.18.2.el7.x86_64 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_010 =LD_LIBRARY_PATH = "/cpu2006.1.2/libs/32:/cpu2006.1.2/libs/64:/cpu2006.1.2/sh10.2" notes_015 =OMP_NUM_THREADS = "20" notes_020 =