SPEC® CPU2017 Integer Rate Result

Copyright 2017-2018 Standard Performance Evaluation Corporation

Fujitsu

PRIMERGY TX1330 M3, Intel Xeon E3-1225 v6, 3.3
GHz

SPECrate2017_int_base = 21.70

SPECrate2017_int_peak = Not Run

CPU2017 License: 19 Test Date: Oct-2017
Test Sponsor: Fujitsu Hardware Availability: May-2017
Tested by: Fujitsu Software Availability: Sep-2017

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Intel Xeon E3-1225 v6
  Max MHz.: 3700
  Nominal: 3300
Enabled: 4 cores, 1 chip
Orderable: 1 chip
Cache L1: 32 KB I + 32 KB D on chip per core
  L2: 256 KB I+D on chip per core
  L3: 8 MB I+D on chip per chip
  Other: None
Memory: 64 GB (4 x 16 GB 2Rx8 PC4-2400T-E)
Storage: 1 x SATA, 500 GB, 7200RPM
Other: None
Software
OS: SUSE Linux Enterprise Server 12 SP2
4.4.21-69-default
Compiler: C/C++: Version 18.0.0.128 of Intel C/C++
Compiler for Linux;
Fortran: Version 18.0.0.128 of Intel Fortran
Compiler for Linux
Parallel: No
Firmware: Fujitsu BIOS Version V5.0.0.11 R1.0.0 for D3373-B1x. Released Feb-2017
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: Not Applicable
Other: jemalloc: jemalloc memory allocator library
V5.0.1;
jemalloc: configured and built at default for
32bit (i686) and 64bit (x86_64) targets;
jemalloc: built with the RedHat Enterprise 7.4,
and the system compiler gcc 4.8.5;
jemalloc: sources available via jemalloc.net;

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
SPECrate2017_int_base 21.70
SPECrate2017_int_peak Not Run
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
500.perlbench_r 4 341 18.7 341 18.7 340 18.7
502.gcc_r 4 261 21.7 261 21.7 261 21.7
505.mcf_r 4 260 24.9 260 24.9 260 24.8
520.omnetpp_r 4 410 12.8 409 12.8 409 12.8
523.xalancbmk_r 4 197 21.4 195 21.7 194 21.7
525.x264_r 4 147 47.7 147 47.8 147 47.7
531.deepsjeng_r 4 242 19.0 242 19.0 242 19.0
541.leela_r 4 422 15.7 423 15.7 421 15.7
548.exchange2_r 4 232 45.1 235 44.7 233 45.0
557.xz_r 4 337 12.8 338 12.8 338 12.8

Submit Notes

 The numactl mechanism was used to bind copies to processors. The config file option 'submit'
 was used to generate numactl commands to bind each copy to a specific processor.
 For details, please see the config file.

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"
 Set CPU frequency governor to maximum performance with:
 cpupower -c all frequency-set -g performance
 cpu idle state set with:
 cpupower idle-set -d 2
 cpupower idle-set -d 3
 Process tuning settings:
 echo always > /sys/kernel/mm/transparent_hugepage/enabled
 echo 1 > /proc/sys/vm/drop_caches
 echo 1000000000 > /proc/sys/kernel/sched_min_granularity_ns

General Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH = "/home/Benchmark/speccpu2017-bin0901/lib/ia32:/home/Benchmark/speccpu2017-bin0901/lib/intel64"
LD_LIBRARY_PATH = "$LD_LIBRARY_PATH:/home/Benchmark/speccpu2017-bin0901/je5.0.1-32"
LD_LIBRARY_PATH = "$LD_LIBRARY_PATH:/home/Benchmark/speccpu2017-bin0901/je5.0.1-64"

 Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM
 memory using Redhat Enterprise Linux 7.4
 Transparent Huge Pages enabled by default
 Prior to runcpu invocation
 Filesystem page cache synced and cleared with:
 sync; echo 3 > /proc/sys/vm/drop_caches
 runcpu command invoked through numactl i.e.:
 numactl --interleave=all runcpu <etc>

Platform Notes

 Sysinfo program /home/Benchmark/speccpu2017-bin0901/bin/sysinfo
 Rev: r5797 of 2017-06-14 96c45e4568ad54c135fd618bcc091c0f
 running on linux-n511 Sun Oct 22 08:02:54 2017

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) CPU E3-1225 v6 @ 3.30GHz
       1  "physical id"s (chips)
       4 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 4
       siblings  : 4
       physical 0: cores 0 1 2 3

 From lscpu:
      Architecture:          x86_64
      CPU op-mode(s):        32-bit, 64-bit
      Byte Order:            Little Endian
      CPU(s):                4
      On-line CPU(s) list:   0-3
      Thread(s) per core:    1
      Core(s) per socket:    4
      Socket(s):             1
      NUMA node(s):          1
      Vendor ID:             GenuineIntel
      CPU family:            6
      Model:                 158
      Model name:            Intel(R) Xeon(R) CPU E3-1225 v6 @ 3.30GHz
      Stepping:              9
      CPU MHz:               3241.498
      CPU max MHz:           3700.0000
      CPU min MHz:           800.0000
      BogoMIPS:              6624.16
      Virtualization:        VT-x
      L1d cache:             32K
      L1i cache:             32K
      L2 cache:              256K
      L3 cache:              8192K
      NUMA node0 CPU(s):     0-3
      Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
      pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
      lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc
      aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg
      fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes
      xsave avx f16c rdrand lahf_lm abm 3dnowprefetch ida arat epb pln pts dtherm hwp
      hwp_notify hwp_act_window hwp_epp intel_pt tpr_shadow vnmi flexpriority ept vpid
      fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm mpx rdseed adx smap
      clflushopt xsaveopt xsavec xgetbv1

 /proc/cpuinfo cache data
    cache size : 8192 KB

 From numactl --hardware  WARNING: a numactl 'node' might or might not correspond to a
 physical chip.
   available: 1 nodes (0)
   node 0 cpus: 0 1 2 3
   node 0 size: 64113 MB
   node 0 free: 63586 MB
   node distances:
   node   0
     0:  10

 From /proc/meminfo
    MemTotal:       65652660 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /usr/bin/lsb_release -d
    SUSE Linux Enterprise Server 12 SP2

 From /etc/*release* /etc/*version*
    SuSE-release:
       SUSE Linux Enterprise Server 12 (x86_64)
       VERSION = 12
       PATCHLEVEL = 2
       # This file is deprecated and will be removed in a future service pack or release.
       # Please check /etc/os-release for details about this release.
    os-release:
       NAME="SLES"
       VERSION="12-SP2"
       VERSION_ID="12.2"
       PRETTY_NAME="SUSE Linux Enterprise Server 12 SP2"
       ID="sles"
       ANSI_COLOR="0;32"
       CPE_NAME="cpe:/o:suse:sles:12:sp2"

 uname -a:
    Linux linux-n511 4.4.21-69-default #1 SMP Tue Oct 25 10:58:20 UTC 2016 (9464f67)
    x86_64 x86_64 x86_64 GNU/Linux

 run-level 3 Oct 22 04:28

 SPEC is set to: /home/Benchmark/speccpu2017-bin0901
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda7      xfs   424G   21G  404G   5% /home

 Additional information from dmidecode follows.  WARNING: Use caution when you interpret
 this section. The 'dmidecode' program reads system data which is "intended to allow
 hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   BIOS FUJITSU // American Megatrends Inc. V5.0.0.11 R1.0.0 for D3373-B1x
       02/20/2017
   Memory:
    4x Samsung M391A2K43BB1-CRC 16 GB 2 rank 2400

 (End of data from sysinfo program)

Base Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

 icpc 

Fortran benchmarks:

 ifort 

Base Portability Flags

500.perlbench_r:  -DSPEC_LP64   -DSPEC_LINUX_X64 
502.gcc_r:  -DSPEC_LP64 
505.mcf_r:  -DSPEC_LP64 
520.omnetpp_r:  -DSPEC_LP64 
523.xalancbmk_r:  -DSPEC_LP64   -DSPEC_LINUX 
525.x264_r:  -DSPEC_LP64 
531.deepsjeng_r:  -DSPEC_LP64 
541.leela_r:  -DSPEC_LP64 
548.exchange2_r:  -DSPEC_LP64 
557.xz_r:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -Wl,-z,muldefs   -xCORE-AVX2   -ipo   -O3   -no-prec-div   -qopt-mem-layout-trans=3   -L/usr/local/je5.0.1-64/lib   -ljemalloc 

C++ benchmarks:

 -Wl,-z,muldefs   -xCORE-AVX2   -ipo   -O3   -no-prec-div   -qopt-mem-layout-trans=3   -L/usr/local/je5.0.1-64/lib   -ljemalloc 

Fortran benchmarks:

 -Wl,-z,muldefs   -xCORE-AVX2   -ipo   -O3   -no-prec-div   -qopt-mem-layout-trans=3   -nostandard-realloc-lhs   -align array32byte   -L/usr/local/je5.0.1-64/lib   -ljemalloc 

Base Other Flags

C benchmarks:

 -m64   -std=c11 

C++ benchmarks:

 -m64 

Fortran benchmarks:

 -m64 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/Intel-ic18.0-official-linux64.2017-10-19.html,
http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.2-BDW-RevF.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/Intel-ic18.0-official-linux64.2017-10-19.xml,
http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.2-BDW-RevF.xml.