# Invocation command line: # /home/cpu2017/bin/harness/runcpu --define default-platform-flags --copies 384 --configfile ic18.0-lin-core-avx2-rate-20170901.cfg --define smt-on --define cores=192 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base --output_format all --nopower --runmode rate --tune base --size refrate intrate # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 18.0.0.128 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.4, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20170901 # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic18.0-lin-core-avx2-rate%{opt_label}%{static_label}-%{version} # (2) Make the label meaningful to YOU. #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=0 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 copies = 1 #Reference the flags Files flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic18.0-official-linux64.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2017/flags/Huawei-Platform-Settings-V1.2-BDW-RevG.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/lib/ia32:$[top]/lib/intel64:$[top]/je5.0.1-32:$[top]/je5.0.1-64 # Affinitization # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #--------- Compilers ---------------------------------------------------------- intrate,fprate: CC = icc -m64 -std=c11 CXX = icpc -m64 FC = ifort -m64 default: # How to say "Show me your version, please" CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version JEMALLOC32_DIR = /usr/local/je5.0.1-32/lib JEMALLOC64_DIR = /usr/local/je5.0.1-64/lib %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intrate,fprate: PORTABILITY= -DSPEC_LP64 500.perlbench_r: CPORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY= -convert big_endian 523.xalancbmk_r: CXXPORTABILITY=-DSPEC_LINUX 526.blender_r: CPORTABILITY= -DSPEC_LINUX -funsigned-char 527.cam4_r: CPORTABILITY= -DSPEC_CASE_FLAG #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECrate, you set the number of copies. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # copies - This config file defaults to testing only 1 copy. You might # try changing it to match the number of cores on your system, # or perhaps the number of virtual CPUs as reported by: # grep -c processor /proc/cpuinfo # Be sure you have enough memory. See: # https://www.spec.org/cpu2017/Docs/system-requirements.html#memory # default: copies = 1 # EDIT to change number of copies (see above) #-------- Tuning Flags ------------------------------------------------- intspeed,fpspeed: #reconsider using a speed config file instead of a rate config file fail=1 intrate,fprate: SSE = -xCORE-AVX2 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte intrate=default: EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64) EXTRA_LDFLAGS = -Wl,-z,muldefs intrate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif fprate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif intrate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=3 %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-mem-layout-trans=3 %endif fprate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %endif #some benchmarks do not want to share a core %ifdef %{smt-on} %define numpeakcopies %{cores} 510.parest_r,521.wrf_r,554.roms_r=peak: copies = %{numpeakcopies} %endif 500.perlbench_r=peak=default: #[56]00.perlbench[rs] has non standard signed overflow EXTRA_OPTIMIZE = -fno-strict-overflow 525.x264_r=peak: EXTRA_OPTIMIZE = -fno-alias 502.gcc_r,523.xalancbmk_r=peak: CC = icc -m32 -std=c11 -L/opt/intel/compilers_and_libraries_2018/linux/lib/ia32 CXX = icpc -m32 -L/opt/intel/compilers_and_libraries_2018/linux/lib/ia32 FC = ifort -m32 -L/opt/intel/compilers_and_libraries_2018/linux/lib/ia32 EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32) EXTRA_LDFLAGS = -Wl,-z,muldefs #Change portability for 32b, large file support for safety PORTABILITY = -D_FILE_OFFSET_BITS=64 #int rate subset for removing FDO 505.mcf_r,525.x264_r,548.exchange2_r,557.xz_r=peak=default: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=3 %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=3 %endif #fp rate subset for removing FDO 503.bwaves_r,538.imagick_r,549.fotonik3d_r=peak=default: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=3 %endif #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 18.0.0.128 of Intel C/C++ sw_compiler001 = Compiler for Linux; sw_compiler002 = Fortran: Version 18.0.0.128 of Intel Fortran sw_compiler003 = Compiler for Linux sw_base_ptrsize = 64-bit fprate,fpspeed: sw_peak_ptrsize = 64-bit intrate,intspeed: sw_peak_ptrsize = Not Applicable sw_other000 = jemalloc: jemalloc memory allocator library V5.0.1 #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = Huawei tester = Huawei test_sponsor = Huawei license_num = 3175 prepared_by = Huawei #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = Mar-2018 sw_avail = Mar-2018 hw_cpu_nominal_mhz = 2200 hw_cpu_max_mhz = 3400 hw_ncores = 192 hw_nthreadspercore = 2 hw_ncpuorder = 4,8 chips hw_model = KunLun 9008 (Intel Xeon E7-8890 v4) hw_other = None # sw_other = # TurboHeap Library V8.1 # Other perf-relevant sw, or "None" hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 60 MB I+D on chip per chip hw_ocache = None # hw_memory001 = # 4 TB (256 x 16 GB 2Rx4 PC4-2133P-R, # N GB (M x N GB nRxn # hw_memory002 = # running at 1600 MHz) # PCn-nnnnnR-n[, ECC and other info]) #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field # hw_cpu_name = # Intel Xeon E9-9999 v9 # chip name # hw_disk = # 9 x 9 TB SATA III 9999 RPM # Size, type, other perf-relevant info # hw_nchips = # 99 # number chips enabled # sw_file = # ext99 # File system # sw_state = # Run level 99 # Software state. # sw_os001 = # Linux Sailboat # Operating system # sw_os002 = # Distribution 7.2 SP1 # and version #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_015 = Binaries compiled on a system with 1x Intel Core i7-4790 CPU + 32GB RAM notes_020 = memory using Redhat Enterprise Linux 7.4 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Numa balancing was disabled using "echo 0 > /proc/sys/kernel/numa_balancing" #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_025 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_030 = Prior to runcpu invocation notes_035 = Filesystem page cache synced and cleared with: notes_040 = sync; echo 3> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_045 = runcpu command invoked through numactl i.e.: notes_050 = numactl --interleave=all runcpu notes_055 = notes_060 =jemalloc: configured and built at default for notes_065 =32bit (i686) and 64bit (x86_64) targets; notes_070 =jemalloc: built with the RedHat Enterprise 7.4, notes_075 =and the system compiler gcc 4.8.5; notes_080 =jemalloc: sources avilable from jemalloc.net or notes_085 =https://github.com/jemalloc/jemalloc/releases; notes_090 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_095 =is mitigated in the system as tested and documented. notes_100 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_105 =is mitigated in the system as tested and documented. notes_110 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_115 =is mitigated in the system as tested and documented. %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %endif # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:ecd2bef08f316af97f5a7768b641e2a3307c1b4b68efb5a57fa76367d790d233) default: notes_plat_sysinfo_000 = Sysinfo program /home/cpu2017/bin/sysinfo notes_plat_sysinfo_005 = Rev: r5797 of 2017-06-14 96c45e4568ad54c135fd618bcc091c0f notes_plat_sysinfo_010 = running on linux-i5c0 Sat Jun 30 11:32:55 2018 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_025 = For more information on this section, see notes_plat_sysinfo_030 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E7-8890 v4 @ 2.20GHz notes_plat_sysinfo_050 = 8 "physical id"s (chips) notes_plat_sysinfo_055 = 384 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_065 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_070 = cpu cores : 24 notes_plat_sysinfo_075 = siblings : 48 notes_plat_sysinfo_080 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_085 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_090 = physical 2: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_095 = physical 3: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_100 = physical 4: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_105 = physical 5: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_110 = physical 6: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_115 = physical 7: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_120 = notes_plat_sysinfo_125 = From lscpu: notes_plat_sysinfo_130 = Architecture: x86_64 notes_plat_sysinfo_135 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_140 = Byte Order: Little Endian notes_plat_sysinfo_145 = CPU(s): 384 notes_plat_sysinfo_150 = On-line CPU(s) list: 0-383 notes_plat_sysinfo_155 = Thread(s) per core: 2 notes_plat_sysinfo_160 = Core(s) per socket: 24 notes_plat_sysinfo_165 = Socket(s): 8 notes_plat_sysinfo_170 = NUMA node(s): 8 notes_plat_sysinfo_175 = Vendor ID: GenuineIntel notes_plat_sysinfo_180 = CPU family: 6 notes_plat_sysinfo_185 = Model: 79 notes_plat_sysinfo_190 = Model name: Intel(R) Xeon(R) CPU E7-8890 v4 @ 2.20GHz notes_plat_sysinfo_195 = Stepping: 1 notes_plat_sysinfo_200 = CPU MHz: 2200.526 notes_plat_sysinfo_205 = CPU max MHz: 3400.0000 notes_plat_sysinfo_210 = CPU min MHz: 1200.0000 notes_plat_sysinfo_215 = BogoMIPS: 4400.06 notes_plat_sysinfo_220 = Virtualization: VT-x notes_plat_sysinfo_225 = L1d cache: 32K notes_plat_sysinfo_230 = L1i cache: 32K notes_plat_sysinfo_235 = L2 cache: 256K notes_plat_sysinfo_240 = L3 cache: 61440K notes_plat_sysinfo_245 = NUMA node0 CPU(s): 0-23,192-215 notes_plat_sysinfo_250 = NUMA node1 CPU(s): 24-47,216-239 notes_plat_sysinfo_255 = NUMA node2 CPU(s): 48-71,240-263 notes_plat_sysinfo_260 = NUMA node3 CPU(s): 72-95,264-287 notes_plat_sysinfo_265 = NUMA node4 CPU(s): 96-119,288-311 notes_plat_sysinfo_270 = NUMA node5 CPU(s): 120-143,312-335 notes_plat_sysinfo_275 = NUMA node6 CPU(s): 144-167,336-359 notes_plat_sysinfo_280 = NUMA node7 CPU(s): 168-191,360-383 notes_plat_sysinfo_285 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_290 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp notes_plat_sysinfo_295 = lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf notes_plat_sysinfo_300 = eagerfpu mce_recovery pni pclmulqdq dtes64 ds_cpl vmx smx est tm2 ssse3 sdbg fma notes_plat_sysinfo_305 = cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes notes_plat_sysinfo_310 = xsave avx f16c rdrand lahf_lm abm 3dnowprefetch arat epb invpcid_single pln pts notes_plat_sysinfo_315 = dtherm intel_pt spec_ctrl stibp retpoline kaiser tpr_shadow vnmi flexpriority ept notes_plat_sysinfo_320 = vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm rdseed adx notes_plat_sysinfo_325 = smap xsaveopt cqm_llc cqm_occup_llc notes_plat_sysinfo_330 = notes_plat_sysinfo_335 = /proc/cpuinfo cache data notes_plat_sysinfo_340 = cache size : 61440 KB notes_plat_sysinfo_345 = notes_plat_sysinfo_350 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_355 = physical chip. notes_plat_sysinfo_360 = available: 8 nodes (0-7) notes_plat_sysinfo_365 = node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 192 193 194 notes_plat_sysinfo_370 = 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 notes_plat_sysinfo_375 = node 0 size: 257400 MB notes_plat_sysinfo_380 = node 0 free: 256766 MB notes_plat_sysinfo_385 = node 1 cpus: 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 notes_plat_sysinfo_390 = 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 notes_plat_sysinfo_395 = 238 239 notes_plat_sysinfo_400 = node 1 size: 258001 MB notes_plat_sysinfo_405 = node 1 free: 257574 MB notes_plat_sysinfo_410 = node 2 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 notes_plat_sysinfo_415 = 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 notes_plat_sysinfo_420 = 262 263 notes_plat_sysinfo_425 = node 2 size: 258001 MB notes_plat_sysinfo_430 = node 2 free: 257675 MB notes_plat_sysinfo_435 = node 3 cpus: 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 notes_plat_sysinfo_440 = 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 notes_plat_sysinfo_445 = 286 287 notes_plat_sysinfo_450 = node 3 size: 258001 MB notes_plat_sysinfo_455 = node 3 free: 257573 MB notes_plat_sysinfo_460 = node 4 cpus: 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 notes_plat_sysinfo_465 = 115 116 117 118 119 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 notes_plat_sysinfo_470 = 305 306 307 308 309 310 311 notes_plat_sysinfo_475 = node 4 size: 258001 MB notes_plat_sysinfo_480 = node 4 free: 257716 MB notes_plat_sysinfo_485 = node 5 cpus: 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 notes_plat_sysinfo_490 = 138 139 140 141 142 143 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 notes_plat_sysinfo_495 = 328 329 330 331 332 333 334 335 notes_plat_sysinfo_500 = node 5 size: 258001 MB notes_plat_sysinfo_505 = node 5 free: 257741 MB notes_plat_sysinfo_510 = node 6 cpus: 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 notes_plat_sysinfo_515 = 162 163 164 165 166 167 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 notes_plat_sysinfo_520 = 352 353 354 355 356 357 358 359 notes_plat_sysinfo_525 = node 6 size: 258001 MB notes_plat_sysinfo_530 = node 6 free: 257771 MB notes_plat_sysinfo_535 = node 7 cpus: 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 notes_plat_sysinfo_540 = 186 187 188 189 190 191 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 notes_plat_sysinfo_545 = 376 377 378 379 380 381 382 383 notes_plat_sysinfo_550 = node 7 size: 257833 MB notes_plat_sysinfo_555 = node 7 free: 257576 MB notes_plat_sysinfo_560 = node distances: notes_plat_sysinfo_565 = node 0 1 2 3 4 5 6 7 notes_plat_sysinfo_570 = 0: 10 21 31 21 41 41 51 51 notes_plat_sysinfo_575 = 1: 21 10 21 31 41 41 51 51 notes_plat_sysinfo_580 = 2: 31 21 10 21 51 51 41 41 notes_plat_sysinfo_585 = 3: 21 31 21 10 51 51 41 41 notes_plat_sysinfo_590 = 4: 41 41 51 51 10 21 31 21 notes_plat_sysinfo_595 = 5: 41 41 51 51 21 10 21 31 notes_plat_sysinfo_600 = 6: 51 51 41 41 31 21 10 21 notes_plat_sysinfo_605 = 7: 51 51 41 41 21 31 21 10 notes_plat_sysinfo_610 = notes_plat_sysinfo_615 = From /proc/meminfo notes_plat_sysinfo_620 = MemTotal: 2112758448 kB notes_plat_sysinfo_625 = HugePages_Total: 0 notes_plat_sysinfo_630 = Hugepagesize: 2048 kB notes_plat_sysinfo_635 = notes_plat_sysinfo_640 = /usr/bin/lsb_release -d notes_plat_sysinfo_645 = SUSE Linux Enterprise Server 12 SP2 notes_plat_sysinfo_650 = notes_plat_sysinfo_655 = From /etc/*release* /etc/*version* notes_plat_sysinfo_660 = SuSE-release: notes_plat_sysinfo_665 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_670 = VERSION = 12 notes_plat_sysinfo_675 = PATCHLEVEL = 2 notes_plat_sysinfo_680 = # This file is deprecated and will be removed in a future service pack or release. notes_plat_sysinfo_685 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_690 = os-release: notes_plat_sysinfo_695 = NAME="SLES" notes_plat_sysinfo_700 = VERSION="12-SP2" notes_plat_sysinfo_705 = VERSION_ID="12.2" notes_plat_sysinfo_710 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP2" notes_plat_sysinfo_715 = ID="sles" notes_plat_sysinfo_720 = ANSI_COLOR="0;32" notes_plat_sysinfo_725 = CPE_NAME="cpe:/o:suse:sles:12:sp2" notes_plat_sysinfo_730 = notes_plat_sysinfo_735 = uname -a: notes_plat_sysinfo_740 = Linux linux-i5c0 4.4.120-92.70-default #1 SMP Wed Mar 14 15:59:43 UTC 2018 (52a83de) notes_plat_sysinfo_745 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_750 = notes_plat_sysinfo_755 = run-level 5 Jun 30 11:30 notes_plat_sysinfo_760 = notes_plat_sysinfo_765 = SPEC is set to: /home/cpu2017 notes_plat_sysinfo_770 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_775 = /dev/sda4 btrfs 2.4T 207G 2.2T 9% /home notes_plat_sysinfo_780 = notes_plat_sysinfo_785 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_790 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_795 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_800 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_805 = BIOS American Megatrends Inc. BLXSV320 2/23/2018 notes_plat_sysinfo_810 = Memory: notes_plat_sysinfo_815 = 49x Hynix HMA84GR7MFR4N-UH 32 GB 2 rank 2400, configured at 1333 notes_plat_sysinfo_820 = 9x Micron 36ASF4G72PZ-2G3B1 32 GB 2 rank 2400, configured at 1333 notes_plat_sysinfo_825 = 128x NO DIMM NO DIMM notes_plat_sysinfo_830 = 6x Samsung M393A4K40BB1-CRC 32 GB 2 rank 2400, configured at 1333 notes_plat_sysinfo_835 = notes_plat_sysinfo_840 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E7-8890 v4 hw_disk = 3 x 900 GB SAS HDD 10K RPM, RAID 0 hw_memory000 = 2 TB (64 x 32 GB 2Rx4 PC4-2400T-R, running at hw_memory001 = 1333) hw_nchips = 8 prepared_by = root (is never output, only tags rawfile) fw_bios = Version BLXSV320 released Feb-2018 sw_file = ext4 sw_os000 = SUSE Linux Enterprise Server 12 SP2 sw_os001 = 4.4.120-92.70-default sw_state = Run level 5 (multi-user) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runcpu before the start of the run: notes_005 =LD_LIBRARY_PATH = "/home/cpu2017/lib/ia32:/home/cpu2017/lib/intel64:/home/cpu2017/je5.0.1-32:/home/cpu2017/je5.0.1-64" notes_010 = notes_plat_form_000 = BIOS configuration: notes_plat_form_005 = Set Power Efficiency Mode to Performance notes_plat_form_010 = Memory Patrol Scrub set to Disable