CPU2017 Flag Description
ASUSTeK Computer Inc. ASUS RS500A-E10(KRPA-U16) Server System 2.00 GHz, AMD EPYC 7662

Compilers: AMD Optimizing C/C++ Compiler Suite


Base Compiler Invocation

C benchmarks

Fortran benchmarks

Benchmarks using both Fortran and C

Benchmarks using Fortran, C, and C++


Peak Compiler Invocation

C benchmarks

Fortran benchmarks

Benchmarks using both Fortran and C

Benchmarks using Fortran, C, and C++


Base Portability Flags

603.bwaves_s

607.cactuBSSN_s

619.lbm_s

621.wrf_s

627.cam4_s

628.pop2_s

638.imagick_s

644.nab_s

649.fotonik3d_s

654.roms_s


Peak Portability Flags

603.bwaves_s

607.cactuBSSN_s

619.lbm_s

621.wrf_s

627.cam4_s

628.pop2_s

638.imagick_s

644.nab_s

649.fotonik3d_s

654.roms_s


Base Optimization Flags

C benchmarks

Fortran benchmarks

Benchmarks using both Fortran and C

Benchmarks using Fortran, C, and C++


Peak Optimization Flags

C benchmarks

619.lbm_s

638.imagick_s

644.nab_s

Fortran benchmarks

603.bwaves_s

649.fotonik3d_s

654.roms_s

Benchmarks using both Fortran and C

621.wrf_s

627.cam4_s

628.pop2_s

Benchmarks using Fortran, C, and C++


Base Other Flags

C benchmarks

Fortran benchmarks

Benchmarks using both Fortran and C

Benchmarks using Fortran, C, and C++


Peak Other Flags

C benchmarks

Fortran benchmarks

Benchmarks using both Fortran and C

Benchmarks using Fortran, C, and C++


Implicitly Included Flags

This section contains descriptions of flags that were included implicitly by other flags, but which do not have a permanent home at SPEC.


Commands and Options Used to Submit Benchmark Runs

Using numactl to bind processes and memory to cores

For multi-copy runs or single copy runs on systems with multiple sockets, it is advantageous to bind a process to a particular core. Otherwise, the OS may arbitrarily move your process from one core to another. This can affect performance. To help, SPEC allows the use of a "submit" command where users can specify a utility to use to bind processes. We have found the utility 'numactl' to be the best choice.

numactl runs processes with a specific NUMA scheduling or memory placement policy. The policy is set for a command and inherited by all of its children. The numactl flag "--physcpubind" specifies which core(s) to bind the process. "-l" instructs numactl to keep a process's memory on the local node while "-m" specifies which node(s) to place a process's memory. For full details on using numactl, please refer to your Linux documentation, 'man numactl'

Note that some older versions of numactl incorrectly interpret application arguments as its own. For example, with the command "numactl --physcpubind=0 -l a.out -m a", numactl will interpret a.out's "-m" option as its own "-m" option. To work around this problem, we put the command to be run in a shell script and then run the shell script using numactl. For example: "echo 'a.out -m a' > run.sh ; numactl --physcpubind=0 bash run.sh"


Shell, Environment, and Other Software Settings

Transparent Huge Pages (THP)

THP is an abstraction layer that automates most aspects of creating, managing, and using huge pages. THP is designed to hide much of the complexity in using huge pages from system administrators and developers, as normal huge pages must be assigned at boot time, can be difficult to manage manually, and often require significant changes to code in order to be used effectively. Most recent Linux OS releases have THP enabled by default.

Linux Huge Page settings

If you need finer control you can manually set huge pages using the following steps:

Note that further information about huge pages may be found in the Linux kernel documentation file hugetlbpage.txt.

ulimit -s <n>

Sets the stack size to n kbytes, or unlimited to allow the stack size to grow without limit.

ulimit -l <n>

Sets the maximum size of memory that may be locked into physical memory.

powersave -f (on SuSE)

Makes the powersave daemon set the CPUs to the highest supported frequency.

/etc/init.d/cpuspeed stop (on Red Hat)

Disables the cpu frequency scaling program in order to set the CPUs to the highest supported frequency.

LD_LIBRARY_PATH

An environment variable that indicates the location in the filesystem of bundled libraries to use when running the benchmark binaries.

kernel/randomize_va_space

This option can be used to select the type of process address space randomization that is used in the system, for architectures that support this feature.

MALLOC_CONF

An environment variable set to tune the jemalloc allocation strategy during the execution of the binaries. This environment variable setting is not needed when building the binaries on the system under test.


Operating System Tuning Parameters

cpupower:
The OS 'cpupower' utility is used to change CPU power governors settings. Available settings are:

Firmware / BIOS / Microcode Settings

Determinism Slider:
This BIOS option allows for AGESA determinism to control performance.
cTDP Control:
This BIOS option is for "Configurable TDP (cTDP)", it allows user can set customized value for TDP. Available settings are:
cTDP:
TDP is an acronym for "Thermal Design Power." TDP is the recommended target for power used when designing the cooling capacity for a server. EPYC processors are able to control this target power consumption within certain limits. This capability is referred to as "configurable TDP" or "cTDP." cTDP can be used to reduce power consumption for greater efficiency, or in some cases, increase power consumption above the default value to provide additional performance. cTDP is controlled using a BIOS option.

The default EPYC cTDP value corresponds with the microprocessor's nominal TDP. The default cTDP value is set at a good balance between performance and energy efficiency. The EPYC 7742 cTDP can be reduced as low as 225W, which will minimize the power consumption for the processor under load, but at the expense of peak performance. Increasing the EPYC 7742 cTDP to 240W will maximize peak performance by allowing the CPU to maintain higher dynamic clock speeds, but will make the microprocessor less energy efficient. Note that at maximum cTDP, the CPU thermal solution must be capable of dissipating at least 240W or the EPYC 7742 processor might engage in thermal throttling under load.

The available cTDP ranges for each EPYC model are in the table below:
ModelMinimum cTDPMaximum cTDP
EPYC 7742225240
EPYC 7702165200
EPYC 7702P180200
EPYC 7452155180
EPYC 7H12225280
EPYC 7762225240
EPYC 7642225240
EPYC 7552165200
EPYC 7542225240
EPYC 7532165200
EPYC 7502165200
EPYC 7502P165200
EPYC 7402165200
EPYC 7402P165200
EPYC 7352155180
EPYC 7302155180
EPYC 7302P155180
EPYC 7282120150
EPYC 7272120150
EPYC 7262155180
EPYC 7252120150
EPYC 7232P120150
EPYC 7662225240
EPYC 7F72225240
EPYC 7F52225240
EPYC 7F32165200
* cTDP must remain below the thermal solution design parameters or thermal throttling could be frequently encountered.
Power phase shedding:
Power phase shedding allows efficiency optimization of the voltage regulator across the variety of loads, minimizing average energy consumption by optimizing the powertrain for specific load power states. Values for this BIOS option can be: Enabled/Disabled. Current default is Enabled.
SVM Mode:
This is CPU virtualization function. With SVM enabled you'll be able to install a virtual machine on your system. Values for this BIOS option can be: Enabled/Disabled. Current default is Enabled.
SR-IOV support:
In virtualization, single root input/output virtualization or SR-IOV is a specification that allows the isolation of the PCI Express resources for manageability and performance reasons. A single physical PCI Express can be shared on a virtual environment using the SR-IOV specification. If system has SR-IOV capable PCIe Devices, this option Enables or Disables Single Root IO Virtualization Support. Values for this BIOS option can be: Enabled/Disabled. Current default is Enabled.
DRAM Scrub time:
DRAM scrubbing is a mechanism for the memory controller to periodically read all memory locations and write back corrected data. The time interval for scrubbing the entire memory can be: Disabled/1 hour/4 hours/8 hours/16 hours/24 hours/48 hours/Auto. Current default is Auto(AGESA default value).
NUMA nodes per socket:
Specifies the number of desired NUMA nodes per populated socket in the system: Current default is Auto.
APBDIS:
Application Power Management (APM) allows the processor to provide maximum performance while remaining within the specified power delivery and removal envelope. APM dynamically monitors processor activity and generates an approximation of power consumption. If power consumption exceeds a defined power limit, a P-state limit is applied by APM hardware to reduce power consumption. APM ensures that average power consumption over a thermally significant time period remains at or below the defined power limit. Set APBDIS=1 will disable Data Fabric APM and the SOC P-state will be fixed. Available settings are:
Package Power Limit Control:
This BIOS option allows user can set customized value for processor package power limit(PPT). Available settings are:
Package Power Limit:
Set customize processor Package Power Limit (PPT) value to be used on all populated processors in the system. Current default value is 240 = Use the 240W PPT value. ***PPT will be used as the ASIC power limit***

Flag description origin markings:

[user] Indicates that the flag description came from the user flags file.
[suite] Indicates that the flag description came from the suite-wide flags file.
[benchmark] Indicates that the flag description came from a per-benchmark flags file.

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/ASUSTekPlatform-Settings-AMD-Rome-V1.0-revG.html,
http://www.spec.org/cpu2017/flags/aocc200-flags-A1.2019-09-17.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/ASUSTekPlatform-Settings-AMD-Rome-V1.0-revG.xml,
http://www.spec.org/cpu2017/flags/aocc200-flags-A1.2019-09-17.xml.


For questions about the meanings of these flags, please contact the tester.
For other inquiries, please contact info@spec.org
Copyright 2017-2020 Standard Performance Evaluation Corporation
Tested with SPEC CPU2017 v1.1.0.
Report generated on 2020-04-14 14:04:25 by SPEC CPU2017 flags formatter v5178.