SPEC CPU®2017 Floating Point Rate Result

Copyright 2017-2020 Standard Performance Evaluation Corporation

Lenovo Global Technology

ThinkSystem SR645
2.00 GHz, AMD EPYC 7702

SPECrate®2017_fp_base = 49200

SPECrate®2017_fp_energy_base = 96900

SPECrate®2017_fp_peak = 53700

SPECrate®2017_fp_energy_peak = 103000

CPU2017 License: 9017 Test Date: Apr-2020
Test Sponsor: Lenovo Global Technology Hardware Availability: Jun-2020
Tested by: Lenovo Global Technology Software Availability: Dec-2019

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: AMD EPYC 7702
  Max MHz: 3350
  Nominal: 2000
Enabled: 128 cores, 2 chips, 2 threads/core
Orderable: 1,2 chips
Cache L1: 32 KB I + 32 KB D on chip per core
  L2: 512 KB I+D on chip per core
  L3: 256 MB I+D on chip per chip,
16 MB shared / 4 cores
  Other: None
Memory: 512 GB (16 x 32 GB 2Rx4 PC4-3200AA-R)
Storage: 1 x 960 GB SATA SSD
Other: None
Software
OS: Red Hat Enterprise Linux 8.1
(Ootpa)
Kernel 4.18.0-147.el8.x86_64
Compiler: C/C++/Fortran: Version 2.0.0 of AOCC
Parallel: No
Firmware: Lenovo BIOS Version D8E105F 1.00 released Mar-2020
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: jemalloc: jemalloc memory allocator library v5.2.0
Power Management: BIOS set to prefer performance at the cost of additional power usage
Power
Max. Power (W): 633.12
Idle Power (W): 203.23
Min. Temperature (C): 20.88
Elevation (m): 43
Line Standard: 220 V / 50 Hz / 1 phase / 1 wire
Provisioning: Line-powered
Power Settings
Management FW: Version 2.00 of D8BT05U
Memory Mode: Normal
Power-Relevant Hardware
Power Supply: 1 x 1100 W (non-redundant)
  Details: ThinkSystem 1100W Platinum Power Supply
SP57A14700
Backplane: 8 x 2.5-inch HDD back plane
Other Storage: RAID 930-8i 2GB Flash PCIe 12Gb Adapter
Storage Model #s: 6FC81AB0
NICs Installed: 1 x ThinkSystem Ethernet 4-port Adaptor @ 1 Gb
NICs Enabled (FW/OS): 4 / 1
NICs Connected/Speed: 1 @ 1 Gb
Other HW Model #s: 8 x High Performance fans
Power Analyzer
Power Analyzer: WIN:8888
Hardware Vendor: YOKOGAWA, Inc.
Model: YokogawaWT310E
Serial Number: C3UG05013E
Input Connection: Default
Metrology Institute: CNAS
Calibration By: China CEPREI Laboratory
Calibration Label: 1GA19013841-0005
Calibration Date: 27-Sep-2019
PTDaemon™ Version: 1.9.1 (a2d19f26; 2019-07-17)
Setup Description: Connected to PSU1
Current Ranges Used: 2.5A
Voltage Range Used: 300V
Temperature Meter
Temperature Meter: WIN:8889
Hardware Vendor: Digi International, Inc.
Model: DigiWATCHPORT_H
Serial Number: COM1
Input Connection: USB
PTDaemon Version: 1.9.1 (a2d19f26; 2019-07-17)
Setup Description: 50 mm in front of SUT main intake

Base Results Table

Benchmark Copies Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
SPECrate®2017_fp_base 49200
SPECrate®2017_fp_energy_base 96900
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
503.bwaves_r 128 1861 690 11000 1270 593 609 1859 691 11100 1270 595 618 1859 690 11100 1260 595 614
507.cactuBSSN_r 128 240 676 1450 1230 603 609 240 674 1460 1220 606 611 241 673 1450 1220 604 609
508.namd_r 128 288 423 1500 886 521 537 286 426 1490 888 523 538 287 424 1490 889 520 538
510.parest_r 128 794 422 4430 823 557 572 789 424 4410 826 559 574 790 424 4420 825 559 573
511.povray_r 128 454 658 2230 1460 490 497 454 659 2230 1450 491 497 456 656 2230 1450 490 498
519.lbm_r 128 775 174 4800 319 620 623 776 174 4810 319 620 623 776 174 4820 318 621 625
521.wrf_r 128 624 460 3680 851 590 597 622 461 3660 855 589 595 623 460 3700 847 593 599
526.blender_r 128 322 606 1710 1240 530 592 321 607 1700 1240 529 592 322 604 1720 1230 532 595
527.cam4_r 128 401 558 2240 1090 560 598 399 561 2230 1090 558 586 399 561 2240 1090 561 605
538.imagick_r 128 212 1500 93.3 3690 440 557 213 1500 92.3 3730 434 552 212 1500 93.2 3700 439 562
544.nab_r 128 261 824 1390 1680 532 559 261 824 1390 1690 530 549 268 805 1410 1660 526 553
549.fotonik3d_r 128 2092 238 12800 434 611 618 2093 238 12800 435 611 619 2091 239 12800 434 612 617
554.roms_r 128 906 224 5490 409 606 610 906 225 5480 409 606 610 903 225 5460 411 605 609

Peak Results Table

Benchmark Copies Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
Seconds Ratio Energy
(kJ)
Energy
Ratio
Average
Power
Maximum
Power
SPECrate®2017_fp_peak 53700
SPECrate®2017_fp_energy_peak 103000
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
503.bwaves_r 128 1861 690 11000 1270 593 609 1859 691 11100 1270 595 618 1859 690 11100 1260 595 614
507.cactuBSSN_r 128 240 676 1450 1230 603 609 240 674 1460 1220 606 611 241 673 1450 1220 604 609
508.namd_r 256 486 501 2710 980 557 568 485 502 2700 981 557 570 484 502 2700 983 557 567
510.parest_r 128 794 422 4430 823 557 572 789 424 4410 826 559 574 790 424 4420 825 559 573
511.povray_r 256 750 797 3900 1660 520 529 750 797 3910 1660 521 530 752 795 3900 1660 519 526
519.lbm_r 128 775 174 4800 319 620 623 776 174 4810 319 620 623 776 174 4820 318 621 625
521.wrf_r 128 624 460 3680 851 590 597 622 461 3660 855 589 595 623 460 3700 847 593 599
526.blender_r 256 549 711 3130 1350 571 607 551 708 3140 1340 570 607 550 709 3140 1340 571 608
527.cam4_r 128 401 558 2240 1090 560 598 399 561 2230 1090 558 586 399 561 2240 1090 561 605
538.imagick_r 256 302 2110 1540 4470 512 603 303 2100 1550 4460 510 603 300 2120 1540 4490 511 603
544.nab_r 256 454 949 2510 1860 554 568 454 949 2510 1860 554 567 454 949 2500 1870 551 565
549.fotonik3d_r 64 1032 242 5840 476 566 573 1031 242 5850 475 567 574 1033 241 5850 475 566 574
554.roms_r 64 398 255 2420 463 608 617 400 254 2430 462 607 617 397 256 2420 464 609 617

Compiler Notes

The AMD64 AOCC Compiler Suite is available at
http://developer.amd.com/amd-aocc/

Submit Notes

The config file option 'submit' was used.
'numactl' was used to bind copies to the cores.
See the configuration file for details.

Operating System Notes

'ulimit -s unlimited' was used to set environment stack size
'ulimit -l 2097152' was used to set environment locked pages in memory limit

runcpu command invoked through numactl i.e.:
numactl --interleave=all runcpu <etc>

Set dirty_ratio=8 to limit dirty cache to 8% of memory
Set swappiness=1 to swap only if necessary
Set zone_reclaim_mode=1 to free local node memory and avoid remote memory
sync then drop_caches=3 to reset caches before invoking runcpu

dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were
all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness).

Transparent huge pages set to 'always' for this run (OS default)

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH =
     "/home/cpu2017-1.1.0-amd-rome-aocc200-C3/amd_rate_aocc200_rome_C_lib/64;
     /home/cpu2017-1.1.0-amd-rome-aocc200-C3/amd_rate_aocc200_rome_C_lib/32:"
MALLOC_CONF = "retain:true"

General Notes

Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using Fedora 26

NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2018-3640 (Spectre variant 3a)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2018-3639 (Spectre variant 4)
is mitigated in the system as tested and documented.

jemalloc: configured and built with GCC v9.1.0 in Ubuntu 19.04 with -O3 -znver2 -flto
jemalloc 5.2.0 is available here:
https://github.com/jemalloc/jemalloc/releases/download/5.2.0/jemalloc-5.2.0.tar.bz2

Platform Notes

 BIOS settings:
 Choose Operating Mode set to Custom Mode
 Determinism Slider set to Power
 cTDP set to Manual
 cTDP Manual set to 200
 Memory Speed set to 3200MHz
 NUMA nodes per socket set to NPS4
 Zero Output set to Advanced Mode
 L1 Stream HW Prefetcher set to Disable
 Global C-state Control set to Disable

 Sysinfo program /home/cpu2017-1.1.0-amd-rome-aocc200-C3/bin/sysinfo
 Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011
 running on localhost.localdomain Sat Apr  4 07:30:43 2020

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : AMD EPYC 7702 64-Core Processor
       2  "physical id"s (chips)
       256 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 64
       siblings  : 128
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
       25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
       53 54 55 56 57 58 59 60 61 62 63
       physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
       25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52
       53 54 55 56 57 58 59 60 61 62 63

 From lscpu:
      Architecture:        x86_64
      CPU op-mode(s):      32-bit, 64-bit
      Byte Order:          Little Endian
      CPU(s):              256
      On-line CPU(s) list: 0-255
      Thread(s) per core:  2
      Core(s) per socket:  64
      Socket(s):           2
      NUMA node(s):        8
      Vendor ID:           AuthenticAMD
      CPU family:          23
      Model:               49
      Model name:          AMD EPYC 7702 64-Core Processor
      Stepping:            0
      CPU MHz:             1796.522
      CPU max MHz:         2000.0000
      CPU min MHz:         1500.0000
      BogoMIPS:            3992.74
      Virtualization:      AMD-V
      L1d cache:           32K
      L1i cache:           32K
      L2 cache:            512K
      L3 cache:            16384K
      NUMA node0 CPU(s):   0-15,128-143
      NUMA node1 CPU(s):   16-31,144-159
      NUMA node2 CPU(s):   32-47,160-175
      NUMA node3 CPU(s):   48-63,176-191
      NUMA node4 CPU(s):   64-79,192-207
      NUMA node5 CPU(s):   80-95,208-223
      NUMA node6 CPU(s):   96-111,224-239
      NUMA node7 CPU(s):   112-127,240-255
      Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
      pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm
      constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni
      pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx
      f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse
      3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext
      perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate sme ssbd mba sev ibrs ibpb stibp
      vmmcall fsgsbase bmi1 avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb
      sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
      cqm_mbm_local clzero irperf xsaveerptr wbnoinvd arat npt lbrv svm_lock nrip_save
      tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic
      v_vmsave_vmload vgif umip rdpid overflow_recov succor smca

 /proc/cpuinfo cache data
    cache size : 512 KB

 From numactl --hardware  WARNING: a numactl 'node' might or might not correspond to a
 physical chip.
   available: 8 nodes (0-7)
   node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 128 129 130 131 132 133 134 135 136
   137 138 139 140 141 142 143
   node 0 size: 64308 MB
   node 0 free: 64083 MB
   node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 144 145 146 147 148 149
   150 151 152 153 154 155 156 157 158 159
   node 1 size: 64503 MB
   node 1 free: 64191 MB
   node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 160 161 162 163 164 165
   166 167 168 169 170 171 172 173 174 175
   node 2 size: 64503 MB
   node 2 free: 64273 MB
   node 3 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 176 177 178 179 180 181
   182 183 184 185 186 187 188 189 190 191
   node 3 size: 64491 MB
   node 3 free: 64254 MB
   node 4 cpus: 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 192 193 194 195 196 197
   198 199 200 201 202 203 204 205 206 207
   node 4 size: 64503 MB
   node 4 free: 64344 MB
   node 5 cpus: 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 208 209 210 211 212 213
   214 215 216 217 218 219 220 221 222 223
   node 5 size: 64503 MB
   node 5 free: 64335 MB
   node 6 cpus: 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 224 225 226
   227 228 229 230 231 232 233 234 235 236 237 238 239
   node 6 size: 64479 MB
   node 6 free: 64272 MB
   node 7 cpus: 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 240 241
   242 243 244 245 246 247 248 249 250 251 252 253 254 255
   node 7 size: 64502 MB
   node 7 free: 64341 MB
   node distances:
   node   0   1   2   3   4   5   6   7
     0:  10  12  12  12  32  32  32  32
     1:  12  10  12  12  32  32  32  32
     2:  12  12  10  12  32  32  32  32
     3:  12  12  12  10  32  32  32  32
     4:  32  32  32  32  10  12  12  12
     5:  32  32  32  32  12  10  12  12
     6:  32  32  32  32  12  12  10  12
     7:  32  32  32  32  12  12  12  10

 From /proc/meminfo
    MemTotal:       528175904 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 From /etc/*release* /etc/*version*
    os-release:
       NAME="Red Hat Enterprise Linux"
       VERSION="8.1 (Ootpa)"
       ID="rhel"
       ID_LIKE="fedora"
       VERSION_ID="8.1"
       PLATFORM_ID="platform:el8"
       PRETTY_NAME="Red Hat Enterprise Linux 8.1 (Ootpa)"
       ANSI_COLOR="0;31"
    redhat-release: Red Hat Enterprise Linux release 8.1 (Ootpa)
    system-release: Red Hat Enterprise Linux release 8.1 (Ootpa)
    system-release-cpe: cpe:/o:redhat:enterprise_linux:8.1:ga

 uname -a:
    Linux localhost.localdomain 4.18.0-147.el8.x86_64 #1 SMP Thu Sep 26 15:52:44 UTC 2019
    x86_64 x86_64 x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-3620 (L1 Terminal Fault):        Not affected
 Microarchitectural Data Sampling:         Not affected
 CVE-2017-5754 (Meltdown):                 Not affected
 CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled
                                           via prctl and seccomp
 CVE-2017-5753 (Spectre variant 1):        Mitigation: usercopy/swapgs barriers and __user
                                           pointer sanitization
 CVE-2017-5715 (Spectre variant 2):        Mitigation: Full AMD retpoline, IBPB:
                                           conditional, IBRS_FW, STIBP: conditional, RSB
                                           filling

 run-level 3 Apr 4 07:24

 SPEC is set to: /home/cpu2017-1.1.0-amd-rome-aocc200-C3
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sda2      xfs   838G   35G  803G   5% /home

 From /sys/devices/virtual/dmi/id
     BIOS:    Lenovo D8E105F-1.00 03/19/2020
     Vendor:  Lenovo
     Product: ThinkSystem SR645 MB
     Product Family: ThinkSystem
     Serial:  1234567890

 Additional information from dmidecode follows.  WARNING: Use caution when you interpret
 this section. The 'dmidecode' program reads system data which is "intended to allow
 hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     16x Samsung M393A4K40DB3-CWE 32 kB 2 rank 3200
     16x Unknown Unknown

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C               | 519.lbm_r(base, peak) 538.imagick_r(base, peak)
                | 544.nab_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
C++             | 508.namd_r(base, peak) 510.parest_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
C++, C          | 511.povray_r(base, peak) 526.blender_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
C++, C, Fortran | 507.cactuBSSN_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran         | 503.bwaves_r(base, peak) 549.fotonik3d_r(base, peak)
                | 554.roms_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran, C      | 521.wrf_r(base, peak) 527.cam4_r(base, peak)
------------------------------------------------------------------------------
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins
  AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 clang 

C++ benchmarks:

 clang++ 

Fortran benchmarks:

 flang 

Benchmarks using both Fortran and C:

 flang   clang 

Benchmarks using both C and C++:

 clang++   clang 

Benchmarks using Fortran, C, and C++:

 clang++   clang   flang 

Base Portability Flags

503.bwaves_r:  -DSPEC_LP64 
507.cactuBSSN_r:  -DSPEC_LP64 
508.namd_r:  -DSPEC_LP64 
510.parest_r:  -DSPEC_LP64 
511.povray_r:  -DSPEC_LP64 
519.lbm_r:  -DSPEC_LP64 
521.wrf_r:  -DSPEC_CASE_FLAG   -Mbyteswapio   -DSPEC_LP64 
526.blender_r:  -funsigned-char   -D__BOOL_DEFINED   -DSPEC_LP64 
527.cam4_r:  -DSPEC_CASE_FLAG   -DSPEC_LP64 
538.imagick_r:  -DSPEC_LP64 
544.nab_r:  -DSPEC_LP64 
549.fotonik3d_r:  -DSPEC_LP64 
554.roms_r:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -ffast-math   -march=znver2   -fstruct-layout=3   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -vector-library=LIBMVEC   -mllvm -inline-threshold=1000   -flv-function-specialization   -z muldefs   -lmvec   -lamdlibm   -ljemalloc   -lflang 

C++ benchmarks:

 -std=c++98   -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Wl,-mllvm -Wl,-suppress-fmas   -O3   -ffast-math   -march=znver2   -mllvm -loop-unswitch-threshold=200000   -mllvm -vector-library=LIBMVEC   -mllvm -unroll-threshold=100   -flv-function-specialization   -mllvm -enable-partial-unswitch   -z muldefs   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Fortran benchmarks:

 -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver2   -funroll-loops   -Mrecursive   -mllvm -vector-library=LIBMVEC   -z muldefs   -Kieee   -fno-finite-math-only   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using both Fortran and C:

 -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -ffast-math   -march=znver2   -fstruct-layout=3   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -vector-library=LIBMVEC   -mllvm -inline-threshold=1000   -flv-function-specialization   -funroll-loops   -Mrecursive   -z muldefs   -Kieee   -fno-finite-math-only   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using both C and C++:

 -std=c++98   -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Wl,-mllvm -Wl,-suppress-fmas   -O3   -ffast-math   -march=znver2   -fstruct-layout=3   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -vector-library=LIBMVEC   -mllvm -inline-threshold=1000   -flv-function-specialization   -mllvm -loop-unswitch-threshold=200000   -mllvm -unroll-threshold=100   -mllvm -enable-partial-unswitch   -z muldefs   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using Fortran, C, and C++:

 -std=c++98   -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Wl,-mllvm -Wl,-suppress-fmas   -O3   -ffast-math   -march=znver2   -fstruct-layout=3   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -vector-library=LIBMVEC   -mllvm -inline-threshold=1000   -flv-function-specialization   -mllvm -loop-unswitch-threshold=200000   -mllvm -unroll-threshold=100   -mllvm -enable-partial-unswitch   -funroll-loops   -Mrecursive   -z muldefs   -Kieee   -fno-finite-math-only   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Peak Compiler Invocation

C benchmarks:

 clang 

C++ benchmarks:

 clang++ 

Fortran benchmarks:

 flang 

Benchmarks using both Fortran and C:

 flang   clang 

Benchmarks using both C and C++:

 clang++   clang 

Benchmarks using Fortran, C, and C++:

 clang++   clang   flang 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

519.lbm_r:  basepeak = yes 
538.imagick_r:  -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver2   -mno-sse4a   -fstruct-layout=5   -mllvm -vectorize-memory-aggressively   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -vector-library=LIBMVEC   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -inline-threshold=1000   -flv-function-specialization   -lmvec   -lamdlibm   -ljemalloc   -lflang 
544.nab_r:  Same as 538.imagick_r 

C++ benchmarks:

508.namd_r:  -std=c++98   -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver2   -flv-function-specialization   -mllvm -unroll-threshold=100   -mllvm -enable-partial-unswitch   -mllvm -loop-unswitch-threshold=200000   -mllvm -vector-library=LIBMVEC   -mllvm -inline-threshold=1000   -lmvec   -lamdlibm   -ljemalloc   -lflang 
510.parest_r:  basepeak = yes 

Fortran benchmarks:

503.bwaves_r:  basepeak = yes 
549.fotonik3d_r:  -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver2   -funroll-loops   -Mrecursive   -mllvm -vector-library=LIBMVEC   -Kieee   -fno-finite-math-only   -lmvec   -lamdlibm   -ljemalloc   -lflang 
554.roms_r:  -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Wl,-mllvm -Wl,-enable-X86-prefetching   -O3   -march=znver2   -funroll-loops   -Mrecursive   -mllvm -vector-library=LIBMVEC   -Kieee   -fno-finite-math-only   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using both Fortran and C:

521.wrf_r:  basepeak = yes 
527.cam4_r:  basepeak = yes 

Benchmarks using both C and C++:

511.povray_r:  -std=c++98   -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Wl,-mllvm -Wl,-x86-use-vzeroupper=false   -Ofast   -march=znver2   -mno-sse4a   -fstruct-layout=5   -mllvm -vectorize-memory-aggressively   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -vector-library=LIBMVEC   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -inline-threshold=1000   -flv-function-specialization   -mllvm -unroll-threshold=100   -mllvm -enable-partial-unswitch   -mllvm -loop-unswitch-threshold=200000   -lmvec   -lamdlibm   -ljemalloc   -lflang 
526.blender_r:  -std=c++98   -flto   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-vector-library=LIBMVEC   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver2   -mno-sse4a   -fstruct-layout=5   -mllvm -vectorize-memory-aggressively   -mllvm -function-specialize   -mllvm -enable-gvn-hoist   -mllvm -unroll-threshold=50   -fremap-arrays   -mllvm -vector-library=LIBMVEC   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp   -mllvm -inline-threshold=1000   -flv-function-specialization   -mllvm -unroll-threshold=100   -mllvm -enable-partial-unswitch   -mllvm -loop-unswitch-threshold=200000   -lmvec   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using Fortran, C, and C++:

507.cactuBSSN_r:  basepeak = yes 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/aocc200-flags-C3.html,
http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-Rome2P-J.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/aocc200-flags-C3.xml,
http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-Rome2P-J.xml.