This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECint_rate95 | 872 |
---|---|
SPECint_rate_base95 | 811 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
099.go | 4 | 168 | 983 | 4 | 167 | 990 |
124.m88ksim | 4 | 76.6 | 893 | 4 | 75 | 916 |
126.gcc | 4 | 76.3 | 802 | 4 | 75 | 812 |
129.compress | 4 | 82.1 | 789 | 4 | 73 | 887 |
130.li | 4 | 89.3 | 766 | 4 | 82 | 836 |
132.ijpeg | 4 | 97.5 | 886 | 4 | 100 | 864 |
134.perl | 4 | 116 | 591 | 4 | 86 | 796 |
147.vortex | 4 | 116 | 839 | 4 | 109 | 889 |
SPECint_rate_base95 | 811 | |||||
SPECint_rate95 | 872 |
Tester Information:
SPEC License #: | 11 |
---|---|
Tested By: | IBM, Austin, TX |
Test Date: | Dec-1999 |
Hardware Avail: | Feb-2000 |
Software Avail: | Feb-2000 |
Hardware Information:
Model Name: | RS/6000 44P-270 (4 CPU) |
---|---|
CPU: | 375 MHz Power3-II |
FPU: | Integrated |
Number of CPU(s): | 4 |
Primary Cache: | 32KB I + 64KB D (on chip) |
Secondary Cache: | 4MB unified (off chip) |
Other Cache: | None |
Memory: | 4GB |
Disk Subsystem: | 2x9.1GB IBM Fast/Wide SCSI 7200 RPM |
Other Hardware: | None |
Software Information:
Operating System: | AIX 4.3.3 |
---|---|
Compiler: | IBM C/C++ 3.6.4.0 |
memdbg 4.4.0.1 | |
FDPR | |
File System: | AIX/JFS |
System State: | Multi-user |
Notes:
Compatibility Flags: gcc -ma; perl -DI_TIME -DI_SYS_TIME Base: -O4 -Q=500 -qpdf1/pdf2 -lhmu go: -O -qarch=pwr3 -Q=500 -qansialias -qdatalocal -qassert=addr -qcompact -bnso -bI:/lib/syscalls.exp m88: -O3 -qarch=ppc -qipa=noobject -Q=500 -qansialias -qpdf1/pdf2 gcc: -O -qarch=ppc -qdatalocal -qassert=addr -qinlglue -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp comp: -O -qarch=ppc -qipa=level=2:noobject -qdatalocal -Q=200 -qassert=allp -qunroll=5 li: -O4 -qipa=noobject -qlibansi -qpdf1/pdf2; fdpr -R3 ijpeg: -O4 -qipa=noobject -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp perl: -O4 -qipa=noobject -Q=200 -qinlglue -Dsetjmp=_setjmp -Dlongjmp=_longjmp -qansialias -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp /usr/ccs/lib/bmalloc.o vort: -O4 -qipa=level=2:noobject -Q=500 -qpdf1/pdf2 -lhm -lhu; fdpr -R2
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
webmaster@spec.org Tue Feb 15 16:40:12 2000First published at SPEC.org on 15-Feb-2000