FAQs (Frequently Asked Questions)
About the SPECmedia Project GroupSM

 


Q: How do I find out more information about SPECmediaSM (formerly MBC)?

A: All inquiries should be addressed to the SPECmedia e-mail alias: gpcmbc-info@spec.org. Provide your name, title, company name, address, e-mail address and your phone number. Write any questions in English.

Q: How can I join SPECmedia?

A: Send your request with the above information to the same e-mail address as above. You should also provide some indication of the resources you have available, and you should be prepared to accept SPECmedia’s mission, goals, scope, and general bylaws (when constituted), as well as be able to pay the fees.

Q: How often are meetings held and where?

A: Face-to-face meetings and conference calls are held at regular intervals. Face-to-face meetings are often sponsored by a member company in its hometown. Past meeting sponsors have been AMD, Hewlett-Packard, IBM, Intel, Motorola, and Sun Microsystems. Send e-mail to ahmad.zandi@eng.sun.com to request a list of upcoming meetings and locations.

Q: Is this a North America-only club?

A: Absolutely not. SPECmedia is an international organization and includes participants and technologies from Europe and Asia.

Q: How are you going to benchmark MPEG-2?

A: A number of technical sessions have been held in which member companies have presented ideas on not only how to benchmark MPEG-2, but also on how to deal with quality and reporting considerations. SPECmedia does not believe that there will be impossible obstacles to overcome to develop appropriate benchmark(s) for MPEG-2, but significant technical work remains to be done.

Q: Will this be an application-, functional-, or system-level benchmark? What will be measured?

A: By group consensus, the MPEG-2 benchmark will be a system-level benchmark that will test, at the very least, processor, memory system, and graphics capabilities. The benchmark will not, however, specify how MPEG-2 will be delivered, or the platform on which it will be delivered. Companies can determine the best way to deliver full-motion video and audio (AC-3/MPEG-2/MPEG-1 Level 2, depending upon licensing issues), and they get to define the term "best" (i.e. cheapest, highest quality, or whatever). The benchmark will specify quality levels and provide guidelines for MPEG-2 ISO compliance.

Q: Will I be able to use your benchmark to compare different computer systems running MPEG-2 to determine which ones provide better functionality?

A: That is the intention, but "better" might mean " good enough for the money," "better-quality picture without dropping frames," "how many frames can this machine pump through without dropping a frame," or any number of other measurements that are being decided upon by SPECmedia members.

Q: How can you ensure that a benchmark will run on all platforms?

A: We can't. Platforms that don’t even exist now might become mainstream in just a few years; such is the nature of multimedia. What we can say is that it’s up to each member company to port the benchmark to its platform of choice, and it’s up to all member firms to make sure that the benchmark is as portable as possible given time/schedule pressures. Initially, it is expected that the SPECmedia MPEG-2 benchmark will run on Windows NT, MacOS, Windows 95, various versions of UNIX, VRTX, OS-9000, and perhaps others. Viable ports will be determined by whether a reference MPEG-2 decoder can be executed on the platform to verify conformance, and whether the YUV, RGB, and/or video screen (LCD or CRT) can be accessed for measurement.

Q: What technologies do you expect to address in the MPEG-2 benchmark?

A: Initially, we will focus on MPEG-2 (including MPEG-1) decoding with AC-3, MPEG-2, and/or MPEG-1 Layer 2 audio. We’ll concentrate primarily on Main Profile at Main Level (MP@ML) attributes that support up to 15 Mbps and will support Low profiles as well. There will be a maximum of 720 horizontal pixels for MP@ML. In the computer space, we are examining 256, 65,536 and 16-million colors, and MPEG-1 and MPEG-2 resolutions for NTSC and PAL. In the consumer space, we are looking at 12 bits/pixel (4:2:0) color at the same resolutions as those under consideration for computers. The next step will be improvements, updates and fixes to the MPEG-2 benchmark in version 1.1. Version 2.0 will address video teleconferencing.

Q: What other technologies are under consideration for future benchmarks?

A: In addition to those listed above, MPEG-2 encoding, speech recognition, 3D positional sound, 3D entertainment-oriented graphics, and multimedia Java-enabled Web pages.

Q: What process is the SPECmedia using to select technologies?

A: We are using discussion, consensus, and ultimately a vote of the member companies. It may be possible that benchmarks developed from outside the committee will be submitted to the SPECmedia. In that case, SPECmedia would assume more of an evaluation role.