SPEC® MPIL2007 Result

Copyright 2006-2010 Standard Performance Evaluation Corporation

SGI

SGI Altix ICE 8200EX
(Intel Xeon X5560, 2.80 GHz)

SPECmpiL_peak2007 = Not Run

MPI2007 license: 4 Test date: Jan-2010
Test sponsor: SGI Hardware Availability: Sep-2009
Tested by: SGI Software Availability: Dec-2009
Benchmark results graph

Results Table

Benchmark Base Peak
Ranks Seconds Ratio Seconds Ratio Seconds Ratio Ranks Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
121.pop2 512 228   17.1  224   17.4  224   17.4 
122.tachyon 512 278   7.00 250   7.79 249   7.79
125.RAxML 512 494   5.91 494   5.91 501   5.83
126.lammps 512 194   12.6  195   12.6  196   12.5 
128.GAPgeofem 512 319   18.6  320   18.6  312   19.0 
129.tera_tf 512 162   6.80 162   6.77 161   6.83
132.zeusmp2 512 129   16.5  129   16.4  128   16.5 
137.lu 512 119   35.3  119   35.3  119   35.3 
142.dmilc 512 99.3 37.1  99.4 37.1  99.2 37.1 
143.dleslie 512 151   20.6  151   20.6  149   20.8 
145.lGemsFDTD 512 196   22.5  196   22.5  195   22.6 
147.l2wrf2 512 356   23.1  356   23.0  356   23.0 
Hardware Summary
Type of System: Homogeneous
Compute Node: SGI Altix ICE 8200EX Compute Node
Interconnects: InfiniBand (MPI)
InfiniBand (I/O)
File Server Node: SGI InfiniteStorage Nexis 2000 NAS
Total Compute Nodes: 64
Total Chips: 128
Total Cores: 512
Total Threads: 1024
Total Memory: 2304 GB
Base Ranks Run: 512
Minimum Peak Ranks: --
Maximum Peak Ranks: --
Software Summary
C Compiler: Intel C Compiler for Linux
Version 11.1, Build 20091130
C++ Compiler: Intel C++ Compiler for Linux
Version 11.1, Build 20091130
Fortran Compiler: Intel Fortran Compiler for Linux
Version 11.1, Build 20091130
Base Pointers: 64-bit
Peak Pointers: 64-bit
MPI Library: SGI MPT 1.25
Other MPI Info: OFED-1.4.1
Pre-processors: None
Other Software: None

Node Description: SGI Altix ICE 8200EX Compute Node

Hardware
Number of nodes: 64
Uses of the node: compute
Vendor: SGI
Model: SGI Altix ICE 8200EX (Intel Xeon X5560, 2.80 GHz)
CPU Name: Intel Xeon X5560
CPU(s) orderable: 1-2 chips
Chips enabled: 2
Cores enabled: 8
Cores per chip: 4
Threads per core: 2
CPU Characteristics: Intel Turbo Boost Technology up to 3.2 GHz,
6.4 GT/s QPI, Hyper-Threading enabled
CPU MHz: 2800
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 256 KB I+D on chip per core
L3 Cache: 8 MB I+D on chip per chip
Other Cache: None
Memory: 36 GB (6*4GB + 6*2GB DDR3-1333 CL9 RDIMMs running
at 1066 MHZ. The 4GB DIMM is installed in DIMM
slot A in each channel.)
Disk Subsystem: None
Other Hardware: None
Adapter: Mellanox MT26418 ConnectX IB DDR
(PCIe x8 Gen2 5 GT/s)
Number of Adapters: 1
Slot Type: PCIe x8 Gen2
Data Rate: InfiniBand 4x DDR
Ports Used: 2
Interconnect Type: InfiniBand
Software
Adapter: Mellanox MT26418 ConnectX IB DDR
(PCIe x8 Gen2 5 GT/s)
Adapter Driver: OFED-1.4.1
Adapter Firmware: 2.6.0
Operating System: SUSE Linux Enterprise Server 10 (x86_64) SP2
Kernel 2.6.16.60-0.30-smp
Local File System: None
Shared File System: NFSv3 IPoIB
System State: Multi-user, run level 3
Other Software: SGI ProPack 6 for Linux Service Pack 5, SGI Tempo
V 1.9

Node Description: SGI InfiniteStorage Nexis 2000 NAS

Hardware
Number of nodes: 1
Uses of the node: fileserver
Vendor: SGI
Model: SGI Altix XE 240 (Intel Xeon 5140, 2.33 GHz)
CPU Name: Intel Xeon 5140
CPU(s) orderable: 1-2 chips
Chips enabled: 2
Cores enabled: 4
Cores per chip: 2
Threads per core: 1
CPU Characteristics: 1333 MHz FSB
CPU MHz: 2333
Primary Cache: 32 KB I + 32 KB D on chip per core
Secondary Cache: 4 MB I+D on chip per chip
L3 Cache: None
Other Cache: None
Memory: 16 GB (8*2GB DDR2-667MHz DIMMS)
Disk Subsystem: 4.3 TB RAID 5
48 x 146 GB SAS (Seagate Cheetah 15K.5 )
Other Hardware: None
Adapter: Mellanox MT26418 ConnectX IB DDR
(PCIe x8 Gen2 5 GT/s)
Number of Adapters: 2
Slot Type: PCIe x8 Gen2
Data Rate: InfiniBand 4x DDR
Ports Used: 2
Interconnect Type: InfiniBand
Software
Adapter: Mellanox MT26418 ConnectX IB DDR
(PCIe x8 Gen2 5 GT/s)
Adapter Driver: OFED-1.4.1
Adapter Firmware: 2.3.0
Operating System: SUSE Linux Enterprise Server 10 (x86_64) SP1
Kernel 2.6.16.54-0.2.5-smp
Local File System: xfs
Shared File System: --
System State: Multi-user, run level 3
Other Software: SGI ProPack 5 for Linux Service Pack 5

Interconnect Description: InfiniBand (MPI)

Hardware
Vendor: Mellanox Technologies
Model: MT26418 ConnectX
Switch Model: Mellanox MT48436 InfiniScale-IV
Number of Switches: 128
Number of Ports: 36
Data Rate: InfiniBand 4x QDR
Firmware: 4020001
Topology: Bristle hypercube with double dimensional links
Primary Use: MPI traffic

Interconnect Description: InfiniBand (I/O)

Hardware
Vendor: Mellanox Technologies
Model: MT26418 ConnectX
Switch Model: Mellanox MT48436 InfiniScale-IV
Number of Switches: 64
Number of Ports: 36
Data Rate: InfiniBand 4x QDR
Firmware: 4020001
Topology: Bristle hypercube with double dimensional links
Primary Use: I/O traffic

Submit Notes

The config file option 'submit' was used.

General Notes

 Software environment:
   export MPI_REQUEST_MAX=65536
   export MPI_TYPE_MAX=32768
   export MPI_BUFS_THRESHOLD=1
   export MPI_DSM_DISTRIBUTE=yes
   export MPI_IB_RAILS=2
   ulimit -s unlimited
 BIOS settings:
   AMI BIOS version 8.15
   Hyper-Threading Technology enabled (default)
   Intel Turbo Boost Technology enabled (default)
   Intel Turbo Boost Technology activated in the OS via
     /etc/init.d/acpid start
     /etc/init.d/powersaved start
     powersave -f
 Interconnect Data Rate:
   The system interconnect has DDR InfiniBand HCAs,
   while the switches and cables run up to QDR rate.
 Job Placement:
   Each MPI job was assigned to a topologically compact set
   of nodes, i.e. the minimal needed number of switches was
   used for each job: 2 switches for 16/32/64 ranks,
   4 switches for 128 ranks, 8 switches for 256 ranks,
   16 switches for 512 ranks, 32 switches for 1024 ranks,
   64 switches for 2048 ranks and 128 switches for
   4096 ranks.

Base Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

126.lammps:  icpc 

Fortran benchmarks:

 ifort 

Benchmarks using both Fortran and C:

 icc   ifort 

Base Portability Flags

121.pop2:  -DSPEC_MPI_CASE_FLAG 

Base Optimization Flags

C benchmarks:

 -O3   -xSSE4.2   -no-prec-div 

C++ benchmarks:

126.lammps:  -O3   -xSSE4.2   -no-prec-div   -ansi-alias 

Fortran benchmarks:

 -O3   -xSSE4.2   -no-prec-div 

Benchmarks using both Fortran and C:

 -O3   -xSSE4.2   -no-prec-div 

Base Other Flags

C benchmarks:

 -lmpi 

C++ benchmarks:

126.lammps:  -lmpi 

Fortran benchmarks:

 -lmpi 

Benchmarks using both Fortran and C:

 -lmpi 

The flags file that was used to format this result can be browsed at
http://www.spec.org/mpi2007/flags/SGI_x86_64_Intel111_flags.20100202.html.

You can also download the XML flags source by saving the following link:
http://www.spec.org/mpi2007/flags/SGI_x86_64_Intel111_flags.20100202.xml.