valid,1

"Full Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,192,745.132285,5.221892,0,S,,,,,,"lref(ref) iteration #1"
121.pop2,192,740.999324,5.251017,0,S,,,,,,"lref(ref) iteration #2"
121.pop2,192,742.984072,5.23699,1,S,,,,,,"lref(ref) iteration #3"
122.tachyon,192,557.998556,3.48388,0,S,,,,,,"lref(ref) iteration #1"
122.tachyon,192,555.374671,3.50034,0,S,,,,,,"lref(ref) iteration #2"
122.tachyon,192,555.891906,3.497083,1,S,,,,,,"lref(ref) iteration #3"
125.RAxML,192,691.293246,4.222521,0,S,,,,,,"lref(ref) iteration #1"
125.RAxML,192,691.77699,4.219568,0,S,,,,,,"lref(ref) iteration #2"
125.RAxML,192,691.462773,4.221485,1,S,,,,,,"lref(ref) iteration #3"
126.lammps,192,477.159975,5.153408,0,S,,,,,,"lref(ref) iteration #1"
126.lammps,192,477.080352,5.154268,1,S,,,,,,"lref(ref) iteration #2"
126.lammps,192,476.537436,5.16014,0,S,,,,,,"lref(ref) iteration #3"
128.GAPgeofem,192,810.160475,7.324475,0,S,,,,,,"lref(ref) iteration #1"
128.GAPgeofem,192,807.432436,7.349222,1,S,,,,,,"lref(ref) iteration #2"
128.GAPgeofem,192,799.195163,7.42497,0,S,,,,,,"lref(ref) iteration #3"
129.tera_tf,192,327.554465,3.355167,0,S,,,,,,"lref(ref) iteration #1"
129.tera_tf,192,324.881973,3.382767,1,S,,,,,,"lref(ref) iteration #2"
129.tera_tf,192,324.593904,3.385769,0,S,,,,,,"lref(ref) iteration #3"
132.zeusmp2,192,323.519423,6.55293,0,S,,,,,,"lref(ref) iteration #1"
132.zeusmp2,192,324.477081,6.533589,0,S,,,,,,"lref(ref) iteration #2"
132.zeusmp2,192,324.224747,6.538674,1,S,,,,,,"lref(ref) iteration #3"
137.lu,192,502.157565,8.367891,0,S,,,,,,"lref(ref) iteration #1"
137.lu,192,498.948159,8.421717,0,S,,,,,,"lref(ref) iteration #2"
137.lu,192,501.876464,8.372578,1,S,,,,,,"lref(ref) iteration #3"
142.dmilc,192,280.293976,13.143343,0,S,,,,,,"lref(ref) iteration #1"
142.dmilc,192,280.307416,13.142713,1,S,,,,,,"lref(ref) iteration #2"
142.dmilc,192,280.351079,13.140666,0,S,,,,,,"lref(ref) iteration #3"
143.dleslie,192,402.131452,7.708922,1,S,,,,,,"lref(ref) iteration #1"
143.dleslie,192,403.102779,7.690346,0,S,,,,,,"lref(ref) iteration #2"
143.dleslie,192,402.035313,7.710765,0,S,,,,,,"lref(ref) iteration #3"
145.lGemsFDTD,192,561.099608,7.861349,0,S,,,,,,"lref(ref) iteration #1"
145.lGemsFDTD,192,561.933508,7.849683,0,S,,,,,,"lref(ref) iteration #2"
145.lGemsFDTD,192,561.448419,7.856465,1,S,,,,,,"lref(ref) iteration #3"
147.l2wrf2,192,1049.193137,7.819342,0,S,,,,,,"lref(ref) iteration #1"
147.l2wrf2,192,1046.778829,7.837377,0,S,,,,,,"lref(ref) iteration #2"
147.l2wrf2,192,1047.02657,7.835522,1,S,,,,,,"lref(ref) iteration #3"

"Selected Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,192,742.984072,5.23699,1,S,,,,,NR,"SelectedIteration (base #3)"
122.tachyon,192,555.891906,3.497083,1,S,,,,,NR,"SelectedIteration (base #3)"
125.RAxML,192,691.462773,4.221485,1,S,,,,,NR,"SelectedIteration (base #3)"
126.lammps,192,477.080352,5.154268,1,S,,,,,NR,"SelectedIteration (base #2)"
128.GAPgeofem,192,807.432436,7.349222,1,S,,,,,NR,"SelectedIteration (base #2)"
129.tera_tf,192,324.881973,3.382767,1,S,,,,,NR,"SelectedIteration (base #2)"
132.zeusmp2,192,324.224747,6.538674,1,S,,,,,NR,"SelectedIteration (base #3)"
137.lu,192,501.876464,8.372578,1,S,,,,,NR,"SelectedIteration (base #3)"
142.dmilc,192,280.307416,13.142713,1,S,,,,,NR,"SelectedIteration (base #2)"
143.dleslie,192,402.131452,7.708922,1,S,,,,,NR,"SelectedIteration (base #1)"
145.lGemsFDTD,192,561.448419,7.856465,1,S,,,,,NR,"SelectedIteration (base #3)"
147.l2wrf2,192,1047.02657,7.835522,1,S,,,,,NR,"SelectedIteration (base #3)"

SPECmpiL_base2007,6.224503,,6.224503
SPECmpiL_peak2007,"Not Run",,,,,,,"Not Run"

"Run number:",114

"System Vendor:",SGI
"System Name:","SGI Altix ICE 8400EX (Intel Xeon X5680, 3.33 GHz)"
"Date tested:",Sep-2010
"MPI2007 License:",4
"Test sponsor:",SGI
"Tested by:",SGI
"Hardware avail:",May-2010
"Software avail:",Oct-2010


"Node Description: SGI Altix ICE 8400EX Compute Node"

HARDWARE

"Number of nodes",16
"Uses of the node",compute
Vendor,SGI
Model,"SGI Altix ICE 8400EX (Intel Xeon X5680, 3.33 GHz)"
"CPU Name","Intel Xeon X5680"
"CPU(s) orderable","1-2 chips"
"Chips enabled",2
"Cores enabled",12
"Cores per chip",6
"Threads per core",2
"CPU Characteristics","Six Core, 3.33 GHz, 6.4 GT/s QPI"
,"Intel Turbo Boost Technology up to 3.6 GHz"
,"Hyper-Threading Technology enabled"
"CPU MHz",3333
"Primary Cache","32 KB I + 32 KB D on chip per core"
"Secondary Cache","256 KB I+D on chip per core"
"L3 Cache","12 MB I+D on chip per chip"
"Other Cache",None
Memory,"24 GB (6*4GB DDR3-1333 CL9 RDIMMs)"
"Disk Subsystem",None
"Other Hardware",None
Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Number of Adapters",2
"Slot Type","PCIe x8 Gen2"
"Data Rate","InfiniBand 4x QDR"
"Ports Used",1
"Interconnect Type",InfiniBand

SOFTWARE

Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Adapter Driver",OFED-1.4.2
"Adapter Firmware",2.7.200
"Operating System","SUSE Linux Enterprise Server 11 SP1,"
,"Kernel 2.6.32.13-0.4-default"
"Local File System",NFSv3
"Shared File System","NFSv3 IPoIB"
"System State","Multi-user, run level 3"
"Other Software","SGI ProPack 7 for Linux Service Pack 1,"
,"SGI Tempo V 2.1"


"Node Description: SGI InfiniteStorage Nexis 2000 NAS"

HARDWARE

"Number of nodes",1
"Uses of the node",fileserver
Vendor,SGI
Model,"SGI Altix XE 270 (Intel Xeon X5670, 2.93 GHz)"
"CPU Name","Intel Xeon X5670"
"CPU(s) orderable","1-2 chips"
"Chips enabled",2
"Cores enabled",12
"Cores per chip",6
"Threads per core",2
"CPU Characteristics","Intel Turbo Boost Technology up to 3.33 GHz"
,"Hyper-Threading Technology enabled"
"CPU MHz",2933
"Primary Cache","32 KB I + 32 KB D on chip per core"
"Secondary Cache","256 KB I+D on chip per chip"
"L3 Cache","12 MB I+D on chip per chip"
"Other Cache",None
Memory,"24 GB (6*4GB DDR3-1333 CL9 DIMMs)"
"Disk Subsystem","8.8 TB RAID 5"
,"60 x 146 GB SAS (Seagate Cheetah 15K.5)"
"Other Hardware",None
Adapter,"Mellanox MT26418 ConnectX, MT25208 InfiniHost III"
,Ex
,"(PCIe x8 Gen2 5 GT/s, PCIe x8 Gen1 2.5 GT/s)"
"Number of Adapters",2
"Slot Type","PCIe x8 Gen2, PCIe x8 Gen1"
"Data Rate","InfiniBand 4x DDR"
"Ports Used",2
"Interconnect Type",InfiniBand

SOFTWARE

Adapter,"Mellanox MT26418 ConnectX, MT25208 InfiniHost III"
,Ex
,"(PCIe x8 Gen2 5 GT/s, PCIe x8 Gen1 2.5 GT/s)"
"Adapter Driver",OFED-1.4.0
"Adapter Firmware","2.6.0 and 5.2.0"
"Operating System","SUSE Linux Enterprise Server 11 (x86_64)"
,"Kernel 2.6.27.19-5-default"
"Local File System",xfs
"Shared File System",--
"System State","Multi-user, run level 3"
"Other Software","SGI Foundation Software 2"


"Interconnect Description: InfiniBand (MPI)"

HARDWARE

Vendor,"Mellanox Technologies and SGI"
Model,"MT26428 ConnectX"
"Switch Model","SGI QDR_1.5_HYPR_2454 with Mellanox Device 48438"
,"(Infiniscale IV)"
"Number of Switches",32
"Number of Ports",36
"Data Rate","InfiniBand 4x QDR"
Firmware,5030005
Topology,"Enhanced Hypercube"
"Primary Use","MPI traffic"


"Interconnect Description: InfiniBand (I/O)"

HARDWARE

Vendor,"Mellanox Technologies and SGI"
Model,"MT26428 ConnectX"
"Switch Model","SGI QDR_1.5_HYPR_2454 with Mellanox Device 48438"
,"(Infiniscale IV)"
"Number of Switches",16
"Number of Ports",36
"Data Rate","InfiniBand 4x QDR"
Firmware,5030005
Topology,"Enhanced Hypercube"
"Primary Use","I/O traffic"


"BENCHMARK DETAILS"

"Type of System",Homogeneous
"Total Compute Nodes",16
"Total Chips",32
"Total Cores",192
"Total Threads",384
"Total Memory","384 GB"
"Base Ranks Run",192
"Minimum Peak Ranks",--
"Maximum Peak Ranks",--
"C Compiler","Intel C Compiler for Linux"
,"Version 11.1, Build 20100414"
"C++ Compiler","Intel C++ Compiler for Linux"
,"Version 11.1, Build 20100414"
"Fortran Compiler","Intel Fortran Compiler for Linux"
,"Version 11.1, Build 20100414"
"Base Pointers",64-bit
"Peak Pointers",64-bit
"MPI Library","SGI MPT 2.02 Beta"
"Other MPI Info","OFED 1.4.2"
Pre-processors,None
"Other Software",None

"Submit Notes"

"The config file option 'submit' was used."

"General Notes"

" Software environment:"
"   export MPI_REQUEST_MAX=65536"
"   export MPI_TYPE_MAX=32768"
"   export MPI_BUFS_THRESHOLD=1"
"   export MPI_IB_RAILS=2"
"   ulimit -s unlimited"

" BIOS settings:"
"   AMI BIOS version 080016"
"   Hyper-Threading Technology enabled (default)"
"   Intel Turbo Boost Technology enabled (default)"
"   Intel Turbo Boost Technology activated in the OS via"
"     /etc/init.d/acpid start"
"     /etc/init.d/powersaved start"
"     powersave -f"

"Job Placement:"
"  Each MPI job was assigned to a topologically compact set"
"  of nodes, i.e. the minimal needed number of switches was"
"  used for each job: 2 switches for 96 ranks,"
"  4 switches for 192 ranks, 8 switches for 384 ranks,"
"  16 switches for 768 ranks, 32 switches for 1536 ranks."

"Base Compiler Invocation"
121.pop2," icc"," ifort"," ifort"
122.tachyon," icc"," icc"
125.RAxML," icc"," icc"
126.lammps," icpc"," icpc"
128.GAPgeofem," icc"," ifort"," icc"," ifort"
129.tera_tf," ifort"," ifort"
132.zeusmp2," icc"," ifort"," ifort"
137.lu," ifort"," ifort"
142.dmilc," icc"," icc"
143.dleslie," ifort"," ifort"
145.lGemsFDTD," ifort"," ifort"
147.l2wrf2," icc"," ifort"," ifort"

"Base Portability Flags"
121.pop2," -DSPEC_MPI_CASE_FLAG"
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Optimization Flags"
121.pop2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"
122.tachyon," -O3"," -xSSE4.2"," -no-prec-div"
125.RAxML," -O3"," -xSSE4.2"," -no-prec-div"
126.lammps," -O3"," -xSSE4.2"," -no-prec-div"," -ansi-alias"
128.GAPgeofem," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"
129.tera_tf," -O3"," -xSSE4.2"," -no-prec-div"
132.zeusmp2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"
137.lu," -O3"," -xSSE4.2"," -no-prec-div"
142.dmilc," -O3"," -xSSE4.2"," -no-prec-div"
143.dleslie," -O3"," -xSSE4.2"," -no-prec-div"
145.lGemsFDTD," -O3"," -xSSE4.2"," -no-prec-div"
147.l2wrf2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"

"Base Other Flags"
121.pop2," -lmpi"
122.tachyon," -lmpi"
125.RAxML," -lmpi"
126.lammps," -lmpi"
128.GAPgeofem," -lmpi"
129.tera_tf," -lmpi"
132.zeusmp2," -lmpi"
137.lu," -lmpi"
142.dmilc," -lmpi"
143.dleslie," -lmpi"
145.lGemsFDTD," -lmpi"
147.l2wrf2," -lmpi"

"Base Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Compiler Invocation"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Portability Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Optimization Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Other Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2
----------------
"For questions about","this result, please","contact the tester.",
"For other inquiries,","please contact",webmaster@spec.org.,
"Copyright 2006-2010 Standard","Performance Evaluation",Corporation,
"Tested with SPEC MPI2007 ","v2.0.  Report","generated on ","Fri Nov 12 17:37:56 2010","by SPEC MPI2007 CSV","formatter v1412."