valid,1

"Full Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,1056,139.958812,27.801036,0,S,,,,,,"lref(ref) iteration #1"
121.pop2,1056,138.441784,28.105677,0,S,,,,,,"lref(ref) iteration #2"
121.pop2,1056,138.48015,28.09789,1,S,,,,,,"lref(ref) iteration #3"
122.tachyon,1056,416.583377,4.666533,0,S,,,,,,"lref(ref) iteration #1"
122.tachyon,1056,136.071497,14.286607,1,S,,,,,,"lref(ref) iteration #2"
122.tachyon,1056,135.879068,14.306839,0,S,,,,,,"lref(ref) iteration #3"
125.RAxML,1056,200.454417,14.561914,1,S,,,,,,"lref(ref) iteration #1"
125.RAxML,1056,200.572863,14.553315,0,S,,,,,,"lref(ref) iteration #2"
125.RAxML,1056,200.25238,14.576606,0,S,,,,,,"lref(ref) iteration #3"
126.lammps,1056,102.088931,24.086842,0,S,,,,,,"lref(ref) iteration #1"
126.lammps,1056,102.502531,23.989652,0,S,,,,,,"lref(ref) iteration #2"
126.lammps,1056,102.433428,24.005835,1,S,,,,,,"lref(ref) iteration #3"
128.GAPgeofem,1056,239.342562,24.792916,0,S,,,,,,"lref(ref) iteration #1"
128.GAPgeofem,1056,231.398051,25.644123,0,S,,,,,,"lref(ref) iteration #2"
128.GAPgeofem,1056,238.780202,24.851307,1,S,,,,,,"lref(ref) iteration #3"
129.tera_tf,1056,84.742007,12.968775,0,S,,,,,,"lref(ref) iteration #1"
129.tera_tf,1056,85.242774,12.892588,1,S,,,,,,"lref(ref) iteration #2"
129.tera_tf,1056,85.974646,12.782838,0,S,,,,,,"lref(ref) iteration #3"
132.zeusmp2,1056,67.578172,31.371076,0,S,,,,,,"lref(ref) iteration #1"
132.zeusmp2,1056,67.564822,31.377275,1,S,,,,,,"lref(ref) iteration #2"
132.zeusmp2,1056,67.527957,31.394405,0,S,,,,,,"lref(ref) iteration #3"
137.lu,1056,67.788712,61.986721,0,S,,,,,,"lref(ref) iteration #1"
137.lu,1056,67.5416,62.21351,0,S,,,,,,"lref(ref) iteration #2"
137.lu,1056,67.696068,62.071552,1,S,,,,,,"lref(ref) iteration #3"
142.dmilc,1056,57.910671,63.615219,1,S,,,,,,"lref(ref) iteration #1"
142.dmilc,1056,57.898212,63.628908,0,S,,,,,,"lref(ref) iteration #2"
142.dmilc,1056,58.288004,63.203399,0,S,,,,,,"lref(ref) iteration #3"
143.dleslie,1056,77.475958,40.012413,1,S,,,,,,"lref(ref) iteration #1"
143.dleslie,1056,78.029977,39.728321,0,S,,,,,,"lref(ref) iteration #2"
143.dleslie,1056,77.422999,40.039782,0,S,,,,,,"lref(ref) iteration #3"
145.lGemsFDTD,1056,137.07409,32.179677,1,S,,,,,,"lref(ref) iteration #1"
145.lGemsFDTD,1056,136.976466,32.202612,0,S,,,,,,"lref(ref) iteration #2"
145.lGemsFDTD,1056,137.909283,31.984794,0,S,,,,,,"lref(ref) iteration #3"
147.l2wrf2,1056,236.621485,34.671408,0,S,,,,,,"lref(ref) iteration #1"
147.l2wrf2,1056,236.619344,34.671722,1,S,,,,,,"lref(ref) iteration #2"
147.l2wrf2,1056,235.9937,34.76364,0,S,,,,,,"lref(ref) iteration #3"

"Selected Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,1056,138.48015,28.09789,1,S,,,,,NR,"SelectedIteration (base #3)"
122.tachyon,1056,136.071497,14.286607,1,S,,,,,NR,"SelectedIteration (base #2)"
125.RAxML,1056,200.454417,14.561914,1,S,,,,,NR,"SelectedIteration (base #1)"
126.lammps,1056,102.433428,24.005835,1,S,,,,,NR,"SelectedIteration (base #3)"
128.GAPgeofem,1056,238.780202,24.851307,1,S,,,,,NR,"SelectedIteration (base #3)"
129.tera_tf,1056,85.242774,12.892588,1,S,,,,,NR,"SelectedIteration (base #2)"
132.zeusmp2,1056,67.564822,31.377275,1,S,,,,,NR,"SelectedIteration (base #2)"
137.lu,1056,67.696068,62.071552,1,S,,,,,NR,"SelectedIteration (base #3)"
142.dmilc,1056,57.910671,63.615219,1,S,,,,,NR,"SelectedIteration (base #1)"
143.dleslie,1056,77.475958,40.012413,1,S,,,,,NR,"SelectedIteration (base #1)"
145.lGemsFDTD,1056,137.07409,32.179677,1,S,,,,,NR,"SelectedIteration (base #1)"
147.l2wrf2,1056,236.619344,34.671722,1,S,,,,,NR,"SelectedIteration (base #2)"

SPECmpiL_base2007,28.160304,,28.160304
SPECmpiL_peak2007,"Not Run",,,,,,,"Not Run"

"Run number:",036

"System Vendor:","Intel Corporation"
"System Name:","Endeavor (Intel Xeon X5670, 2.93 GHz, DDR3-1333 MHz, SMT on, Turbo off)"
"Date tested:",Sep-2010
"MPI2007 License:",13
"Test sponsor:","Intel Corporation"
"Tested by:","Pavel Shelepugin"
"Hardware avail:",Mar-2010
"Software avail:",Nov-2010


"Node Description: Endeavor Node"

HARDWARE

"Number of nodes",88
"Uses of the node",compute
Vendor,Intel
Model,SR1600UR
"CPU Name","Intel Xeon X5670"
"CPU(s) orderable","1-2 chips"
"Chips enabled",2
"Cores enabled",12
"Cores per chip",6
"Threads per core",2
"CPU Characteristics","Intel Turbo Boost Technology disabled,"
,"6.4 GT/s QPI, Hyper-Threading enabled"
"CPU MHz",2934
"Primary Cache","32 KB I + 32 KB D on chip per core"
"Secondary Cache","256 KB I+D on chip per core"
"L3 Cache","12 MB I+D on chip per chip, 12 MB shared / 6 cores"
"Other Cache",None
Memory,"24 GB (RDIMM 6x4-GB DDR3-1333 MHz)"
"Disk Subsystem","Seagate 400 GB ST3400755SS"
"Other Hardware",None
Adapter,"Intel (ESB2) 82575EB Dual-Port Gigabit"
,"Ethernet Controller"
"Number of Adapters",1
"Slot Type","PCI-Express x8"
"Data Rate","1Gbps Ethernet"
"Ports Used",2
"Interconnect Type",Ethernet
Adapter,"Mellanox MHQH29-XTC"
"Number of Adapters",1
"Slot Type","PCIe x8 Gen2"
"Data Rate","InfiniBand 4x QDR"
"Ports Used",1
"Interconnect Type",InfiniBand

SOFTWARE

Adapter,"Intel (ESB2) 82575EB Dual-Port Gigabit"
,"Ethernet Controller"
"Adapter Driver",e1000
"Adapter Firmware",None
Adapter,"Mellanox MHQH29-XTC"
"Adapter Driver","OFED 1.4.2"
"Adapter Firmware",2.7.000
"Operating System","Red Hat EL 5.4, kernel 2.6.18-164"
"Local File System",Linux/ext2
"Shared File System",NFS
"System State",Multi-User
"Other Software","PBS Pro 10.1"


"Node Description: NFS"

HARDWARE

"Number of nodes",1
"Uses of the node",fileserver
Vendor,Intel
Model,S7000FC4UR
"CPU Name","Intel Xeon CPU"
"CPU(s) orderable","1-4 chips"
"Chips enabled",4
"Cores enabled",16
"Cores per chip",4
"Threads per core",2
"CPU Characteristics",--
"CPU MHz",2926
"Primary Cache","32 KB I + 32 KB D on chip per core"
"Secondary Cache","8 MB I+D on chip per chip, 4 MB shared / 2 cores"
"L3 Cache",None
"Other Cache",None
Memory,"64 GB"
"Disk Subsystem","8 disks, 500GB/disk, 2.7TB total"
"Other Hardware",None
Adapter,"Intel 82563GB Dual-Port Gigabit"
,"Ethernet Controller"
"Number of Adapters",1
"Slot Type","PCI-Express x8"
"Data Rate","1Gbps Ethernet"
"Ports Used",1
"Interconnect Type",Ethernet

SOFTWARE

Adapter,"Intel 82563GB Dual-Port Gigabit"
,"Ethernet Controller"
"Adapter Driver",e1000e
"Adapter Firmware",N/A
"Operating System","RedHat EL 5 Update 4"
"Local File System",None
"Shared File System",NFS
"System State",Multi-User
"Other Software",None


"Interconnect Description: IB Switch"

HARDWARE

Vendor,Mellanox
Model,"Mellanox MTS3600Q-1UNC"
"Switch Model","Mellanox MTS3600Q-1UNC"
"Number of Switches",46
"Number of Ports",36
"Data Rate","InfiniBand 4x QDR"
Firmware,7.1.000
Topology,"Fat tree"
"Primary Use","MPI traffic"


"Interconnect Description: Gigabit Ethernet"

HARDWARE

Vendor,"Force10 Networks"
Model,"Force10 S50, Force10 C300"
"Switch Model","Force10 S50, Force10 C300"
"Number of Switches",15
"Number of Ports",48
"Data Rate","1Gbps Ethernet"
Firmware,8.2.1.0
Topology,"Fat tree"
"Primary Use","Cluster File System"


"BENCHMARK DETAILS"

"Type of System",Homogeneous
"Total Compute Nodes",88
"Total Chips",176
"Total Cores",1056
"Total Threads",2112
"Total Memory","2112 GB"
"Base Ranks Run",1056
"Minimum Peak Ranks",--
"Maximum Peak Ranks",--
"C Compiler","Intel C++ Compiler 12.0.0.072 for Linux"
"C++ Compiler","Intel C++ Compiler 12.0.0.072 for Linux"
"Fortran Compiler","Intel Fortran Compiler 12.0.0.072 for Linux"
"Base Pointers",64-bit
"Peak Pointers",64-bit
"MPI Library","Intel MPI Library 4.0.1.005 for Linux"
"Other MPI Info",None
Pre-processors,No
"Other Software",None

"Submit Notes"

"The config file option 'submit' was used."

"General Notes"

" MPI startup command:"
"   mpiexec.hydra command was used to start MPI jobs. To start a job by"
"   this command, the daemons are not required to be run beforehand."

" BIOS settings:"
"   Intel Hyper-Threading Technology (SMT): Enabled (default is Enabled)"
"   Intel Turbo Boost Technology (Turbo)  : Disabled (default is Enabled)"

" RAM configuration:"
"   Compute nodes have 1x4-GB RDIMM on each memory channel."

" Network:"
"   Forty six 36-port switches: 18 core switches and 28 leaf switches."
"   Each leaf has one link to each core. Remaining 18 ports on 25 of 28 leafs"
"   are used for compute nodes. On the remaining 3 leafs the ports are used"
"   for FS nodes and other peripherals."

" Job placement:"
"   Each MPI job was assigned to a topologically compact set of nodes, i.e."
"   the minimal needed number of leaf switches was used for each job: 1 switch"
"   for 96/192 ranks, 2 switches for 384 ranks, 4 switches for 768 ranks,"
"   8 switches for 1536 ranks."

" PBS Pro was used for job submission. It has no impact on performance."
"   Can be found at: http://www.altair.com"

"Base Compiler Invocation"
121.pop2," mpiicc"," mpiifort"," mpiifort"
122.tachyon," mpiicc"," mpiicc"
125.RAxML," mpiicc"," mpiicc"
126.lammps," mpiicpc"," mpiicpc"
128.GAPgeofem," mpiicc"," mpiifort"," mpiicc"," mpiifort"
129.tera_tf," mpiifort"," mpiifort"
132.zeusmp2," mpiicc"," mpiifort"," mpiifort"
137.lu," mpiifort"," mpiifort"
142.dmilc," mpiicc"," mpiicc"
143.dleslie," mpiifort"," mpiifort"
145.lGemsFDTD," mpiifort"," mpiifort"
147.l2wrf2," mpiicc"," mpiifort"," mpiifort"

"Base Portability Flags"
121.pop2," -DSPEC_MPI_CASE_FLAG"
122.tachyon
125.RAxML
126.lammps," -DMPICH_IGNORE_CXX_SEEK"
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Optimization Flags"
121.pop2," -O3"," -xSSE4.2"," -no-prec-div"
122.tachyon," -O3"," -xSSE4.2"," -no-prec-div"
125.RAxML," -O3"," -xSSE4.2"," -no-prec-div"
126.lammps," -O3"," -xSSE4.2"," -no-prec-div"
128.GAPgeofem," -O3"," -xSSE4.2"," -no-prec-div"
129.tera_tf," -O3"," -xSSE4.2"," -no-prec-div"
132.zeusmp2," -O3"," -xSSE4.2"," -no-prec-div"
137.lu," -O3"," -xSSE4.2"," -no-prec-div"
142.dmilc," -O3"," -xSSE4.2"," -no-prec-div"
143.dleslie," -O3"," -xSSE4.2"," -no-prec-div"
145.lGemsFDTD," -O3"," -xSSE4.2"," -no-prec-div"
147.l2wrf2," -O3"," -xSSE4.2"," -no-prec-div"

"Base Other Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Compiler Invocation"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Portability Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Optimization Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Other Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2
----------------
"For questions about","this result, please","contact the tester.",
"For other inquiries,","please contact",webmaster@spec.org.,
"Copyright 2006-2010 Standard","Performance Evaluation",Corporation,
"Tested with SPEC MPI2007 ","v2.0.  Report","generated on ","Wed Oct  6 11:13:11 2010","by SPEC MPI2007 CSV","formatter v1412."