valid,1 "Full Results Table" Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description 104.milc,192,55.454489,28.22134,0,S,,,,,,"mref(ref) iteration #1" 104.milc,192,52.584454,29.761648,1,S,,,,,,"mref(ref) iteration #2" 104.milc,192,52.555974,29.777776,0,S,,,,,,"mref(ref) iteration #3" 107.leslie3d,192,164.177015,31.79495,0,S,,,,,,"mref(ref) iteration #1" 107.leslie3d,192,164.200677,31.790368,1,S,,,,,,"mref(ref) iteration #2" 107.leslie3d,192,164.605917,31.712104,0,S,,,,,,"mref(ref) iteration #3" 113.GemsFDTD,192,238.083628,26.494892,1,S,,,,,,"mref(ref) iteration #1" 113.GemsFDTD,192,237.522693,26.557462,0,S,,,,,,"mref(ref) iteration #2" 113.GemsFDTD,192,238.127581,26.490002,0,S,,,,,,"mref(ref) iteration #3" 115.fds4,192,58.172452,33.538212,0,S,,,,,,"mref(ref) iteration #1" 115.fds4,192,57.93654,33.674776,1,S,,,,,,"mref(ref) iteration #2" 115.fds4,192,57.867612,33.714887,0,S,,,,,,"mref(ref) iteration #3" 121.pop2,192,167.072288,24.707868,0,S,,,,,,"mref(ref) iteration #1" 121.pop2,192,166.406135,24.806778,0,S,,,,,,"mref(ref) iteration #2" 121.pop2,192,166.850135,24.740765,1,S,,,,,,"mref(ref) iteration #3" 122.tachyon,192,90.018331,31.071449,0,S,,,,,,"mref(ref) iteration #1" 122.tachyon,192,90.057525,31.057927,1,S,,,,,,"mref(ref) iteration #2" 122.tachyon,192,90.08036,31.050054,0,S,,,,,,"mref(ref) iteration #3" 126.lammps,192,127.378388,22.884573,0,S,,,,,,"mref(ref) iteration #1" 126.lammps,192,127.306421,22.89751,1,S,,,,,,"mref(ref) iteration #2" 126.lammps,192,127.299171,22.898814,0,S,,,,,,"mref(ref) iteration #3" 127.wrf2,192,145.620695,53.536347,0,S,,,,,,"mref(ref) iteration #1" 127.wrf2,192,145.691048,53.510494,1,S,,,,,,"mref(ref) iteration #2" 127.wrf2,192,145.86163,53.447915,0,S,,,,,,"mref(ref) iteration #3" 128.GAPgeofem,192,56.43374,36.591585,0,S,,,,,,"mref(ref) iteration #1" 128.GAPgeofem,192,55.591091,37.14624,0,S,,,,,,"mref(ref) iteration #2" 128.GAPgeofem,192,56.244844,36.714476,1,S,,,,,,"mref(ref) iteration #3" 129.tera_tf,192,93.43776,29.623998,1,S,,,,,,"mref(ref) iteration #1" 129.tera_tf,192,93.433639,29.625304,0,S,,,,,,"mref(ref) iteration #2" 129.tera_tf,192,93.75328,29.5243,0,S,,,,,,"mref(ref) iteration #3" 130.socorro,192,91.833122,41.564524,0,S,,,,,,"mref(ref) iteration #1" 130.socorro,192,91.795256,41.58167,1,S,,,,,,"mref(ref) iteration #2" 130.socorro,192,89.877878,42.468737,0,S,,,,,,"mref(ref) iteration #3" 132.zeusmp2,192,77.421198,40.079462,0,S,,,,,,"mref(ref) iteration #1" 132.zeusmp2,192,77.436435,40.071576,1,S,,,,,,"mref(ref) iteration #2" 132.zeusmp2,192,77.649265,39.961743,0,S,,,,,,"mref(ref) iteration #3" 137.lu,192,84.320365,43.595637,0,S,,,,,,"mref(ref) iteration #1" 137.lu,192,83.807588,43.862377,0,S,,,,,,"mref(ref) iteration #2" 137.lu,192,84.145479,43.686245,1,S,,,,,,"mref(ref) iteration #3" "Selected Results Table" Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description 104.milc,192,52.584454,29.761648,1,S,,,,,NR,"SelectedIteration (base #2)" 107.leslie3d,192,164.200677,31.790368,1,S,,,,,NR,"SelectedIteration (base #2)" 113.GemsFDTD,192,238.083628,26.494892,1,S,,,,,NR,"SelectedIteration (base #1)" 115.fds4,192,57.93654,33.674776,1,S,,,,,NR,"SelectedIteration (base #2)" 121.pop2,192,166.850135,24.740765,1,S,,,,,NR,"SelectedIteration (base #3)" 122.tachyon,192,90.057525,31.057927,1,S,,,,,NR,"SelectedIteration (base #2)" 126.lammps,192,127.306421,22.89751,1,S,,,,,NR,"SelectedIteration (base #2)" 127.wrf2,192,145.691048,53.510494,1,S,,,,,NR,"SelectedIteration (base #2)" 128.GAPgeofem,192,56.244844,36.714476,1,S,,,,,NR,"SelectedIteration (base #3)" 129.tera_tf,192,93.43776,29.623998,1,S,,,,,NR,"SelectedIteration (base #1)" 130.socorro,192,91.795256,41.58167,1,S,,,,,NR,"SelectedIteration (base #2)" 132.zeusmp2,192,77.436435,40.071576,1,S,,,,,NR,"SelectedIteration (base #2)" 137.lu,192,84.145479,43.686245,1,S,,,,,NR,"SelectedIteration (base #3)" SPECmpiM_base2007,33.341438,,33.341438 SPECmpiM_peak2007,"Not Run",,,,,,,"Not Run" "Run number:",025 "System Vendor:",SGI "System Name:","SGI Altix ICE 8400EX (Intel Xeon X5690, 3.46 GHz)" "Date tested:",Jun-2011 "MPI2007 License:",4 "Test sponsor:",SGI "Tested by:",SGI "Hardware avail:",Feb-2011 "Software avail:",Aug-2011 "Node Description: SGI Altix ICE 8400EX Compute Node" HARDWARE "Number of nodes",16 "Uses of the node",compute Vendor,SGI Model,"SGI Altix ICE 8400EX (Intel Xeon X5690, 3.46 GHz)" "CPU Name","Intel Xeon X5690" "CPU(s) orderable","1-2 chips" "Chips enabled",2 "Cores enabled",12 "Cores per chip",6 "Threads per core",2 "CPU Characteristics","Six Core, 3.46 GHz, 6.4 GT/s QPI" ,"Intel Turbo Boost Technology up to 3.73 GHz" ,"Hyper-Threading Technology enabled" "CPU MHz",3467 "Primary Cache","32 KB I + 32 KB D on chip per core" "Secondary Cache","256 KB I+D on chip per core" "L3 Cache","12 MB I+D on chip per chip" "Other Cache",None Memory,"24 GB (6 x 4 GB 2Rx4 PC3-10600R-9, ECC)" "Disk Subsystem",None "Other Hardware",None Adapter,"Mellanox MT26428 ConnectX IB QDR" ,"(PCIe x8 Gen2 5 GT/s)" "Number of Adapters",2 "Slot Type","PCIe x8 Gen2" "Data Rate","InfiniBand 4x QDR" "Ports Used",1 "Interconnect Type",InfiniBand SOFTWARE Adapter,"Mellanox MT26428 ConnectX IB QDR" ,"(PCIe x8 Gen2 5 GT/s)" "Adapter Driver",OFED-1.4.2 "Adapter Firmware",2.7.8200 "Operating System","SUSE Linux Enterprise Server 11 SP1," ,"Kernel 2.6.32.13-0.4-default" "Local File System",NFSv3 "Shared File System","NFSv3 IPoIB" "System State","Multi-user, run level 3" "Other Software","SGI ProPack 7SP1 for Linux," ,"Build 701r3.sles11-1005252113" ,"SGI Tempo Compute Node 2.1," ,"Build 701r3.sles11-1005252113" "Node Description: SGI InfiniteStorage Nexis 2000 NAS" HARDWARE "Number of nodes",1 "Uses of the node",fileserver Vendor,SGI Model,"SGI Altix XE 270 (Intel Xeon X5670, 2.93 GHz)" "CPU Name","Intel Xeon X5670" "CPU(s) orderable","1-2 chips" "Chips enabled",2 "Cores enabled",12 "Cores per chip",6 "Threads per core",2 "CPU Characteristics","Intel Turbo Boost Technology up to 3.33 GHz" ,"Hyper-Threading Technology enabled" "CPU MHz",2933 "Primary Cache","32 KB I + 32 KB D on chip per core" "Secondary Cache","256 KB I+D on chip per chip" "L3 Cache","12 MB I+D on chip per chip" "Other Cache",None Memory,"96 GB (12*8 GB DDR3-1333 CL9 DIMMs)" "Disk Subsystem","8.8 TB RAID 5" ,"60 x 146 GB SAS (Seagate Cheetah 15K.5)" "Other Hardware",None Adapter,"Mellanox MT26428 ConnectX IB QDR" ,"(PCIe x8 Gen2 5 GT/s)" "Number of Adapters",2 "Slot Type","PCIe x8 Gen2" "Data Rate","InfiniBand 4x QDR" "Ports Used",2 "Interconnect Type",InfiniBand SOFTWARE Adapter,"Mellanox MT26428 ConnectX IB QDR" ,"(PCIe x8 Gen2 5 GT/s)" "Adapter Driver",OFED-1.4.0 "Adapter Firmware",2.7.0 "Operating System","SUSE Linux Enterprise Server 11 (x86_64)" ,"Kernel 2.6.27.19-5-default" "Local File System",xfs "Shared File System",-- "System State","Multi-user, run level 3" "Other Software","SGI Foundation Software 2, Build" ,700r3.sles11-1004061553 "Interconnect Description: InfiniBand (MPI and I/O)" HARDWARE Vendor,"Mellanox Technologies and SGI" Model,None "Switch Model","SGI QDR_1.5_HYPR_2454 with Mellanox Device 48438" ,"(Infiniscale IV)" "Number of Switches",4 "Number of Ports",36 "Data Rate","InfiniBand 4x QDR" Firmware,5040005 Topology,"Enhanced Hypercube" "Primary Use","MPI and I/O traffic" "BENCHMARK DETAILS" "Type of System",Homogeneous "Total Compute Nodes",16 "Total Chips",32 "Total Cores",192 "Total Threads",384 "Total Memory","384 GB" "Base Ranks Run",192 "Minimum Peak Ranks",-- "Maximum Peak Ranks",-- "C Compiler","Intel C++ Composer XE 2011 for Linux," ,"Version 12.0.3.174 Build 20110309" "C++ Compiler","Intel C++ Composer XE 2011 for Linux," ,"Version 12.0.3.174 Build 20110309" "Fortran Compiler","Intel Fortran Composer XE 2011 for Linux," ,"Version 12.0.3.174 Build 20110309" "Base Pointers",64-bit "Peak Pointers",64-bit "MPI Library","SGI MPT 2.04 Patch 10789" "Other MPI Info","OFED 1.4.2" Pre-processors,None "Other Software",None "Submit Notes" "The config file option 'submit' was used." "General Notes" " Software environment:" " export MPI_REQUEST_MAX=65536" " export MPI_TYPE_MAX=32768" " export MPI_BUFS_THRESHOLD=1" " export MPI_IB_RAILS=2" " ulimit -s unlimited" " BIOS settings:" " AMI BIOS version 080016" " Hyper-Threading Technology enabled (default)" " Intel Turbo Boost Technology enabled (default)" " Intel Turbo Boost Technology activated in the OS via" " /etc/init.d/acpid start" " /etc/init.d/powersaved start" " powersave -f" " Job Placement:" " Each MPI job was assigned to a topologically compact set" " of nodes, i.e. the minimal needed number of switches was" " used for each job: 2 switches for up to 96 ranks," " 4 switches for 192 ranks, 8 switches for 384 ranks," " 16 switches for 768 ranks." " Additional notes regarding interconnect:" " The Infiniband network consists of two independent planes," " with half the switches in the system allocated to each plane." " I/O traffic is restricted to one plane, while MPI traffic can" " use both planes." "Base Compiler Invocation" 104.milc," icc"," icc" 107.leslie3d," ifort"," ifort" 113.GemsFDTD," ifort"," ifort" 115.fds4," icc"," ifort"," ifort" 121.pop2," icc"," ifort"," ifort" 122.tachyon," icc"," icc" 126.lammps," icpc"," icpc" 127.wrf2," icc"," ifort"," ifort" 128.GAPgeofem," icc"," ifort"," icc"," ifort" 129.tera_tf," ifort"," ifort" 130.socorro," icc"," ifort"," ifort" 132.zeusmp2," icc"," ifort"," ifort" 137.lu," ifort"," ifort" "Base Portability Flags" 104.milc 107.leslie3d 113.GemsFDTD 115.fds4 121.pop2," -DSPEC_MPI_CASE_FLAG" 122.tachyon 126.lammps 127.wrf2," -DSPEC_MPI_CASE_FLAG"," -DSPEC_MPI_LINUX" 128.GAPgeofem 129.tera_tf 130.socorro 132.zeusmp2 137.lu "Base Optimization Flags" 104.milc," -O3"," -xSSE4.2"," -no-prec-div" 107.leslie3d," -O3"," -xSSE4.2"," -no-prec-div" 113.GemsFDTD," -O3"," -xSSE4.2"," -no-prec-div" 115.fds4," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 121.pop2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 122.tachyon," -O3"," -xSSE4.2"," -no-prec-div" 126.lammps," -O3"," -xSSE4.2"," -no-prec-div"," -ansi-alias" 127.wrf2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 128.GAPgeofem," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 129.tera_tf," -O3"," -xSSE4.2"," -no-prec-div" 130.socorro," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 132.zeusmp2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 137.lu," -O3"," -xSSE4.2"," -no-prec-div" "Base Other Flags" 104.milc," -lmpi" 107.leslie3d," -lmpi" 113.GemsFDTD," -lmpi" 115.fds4," -lmpi" 121.pop2," -lmpi" 122.tachyon," -lmpi" 126.lammps," -lmpi" 127.wrf2," -lmpi" 128.GAPgeofem," -lmpi" 129.tera_tf," -lmpi" 130.socorro," -lmpi" 132.zeusmp2," -lmpi" 137.lu," -lmpi" "Base Forbidden Flags" 104.milc 107.leslie3d 113.GemsFDTD 115.fds4 121.pop2 122.tachyon 126.lammps 127.wrf2 128.GAPgeofem 129.tera_tf 130.socorro 132.zeusmp2 137.lu "Base Unknown Flags" 104.milc 107.leslie3d 113.GemsFDTD 115.fds4 121.pop2 122.tachyon 126.lammps 127.wrf2 128.GAPgeofem 129.tera_tf 130.socorro 132.zeusmp2 137.lu "Peak Compiler Invocation" 104.milc 107.leslie3d 113.GemsFDTD 115.fds4 121.pop2 122.tachyon 126.lammps 127.wrf2 128.GAPgeofem 129.tera_tf 130.socorro 132.zeusmp2 137.lu "Peak Portability Flags" 104.milc 107.leslie3d 113.GemsFDTD 115.fds4 121.pop2 122.tachyon 126.lammps 127.wrf2 128.GAPgeofem 129.tera_tf 130.socorro 132.zeusmp2 137.lu "Peak Optimization Flags" 104.milc 107.leslie3d 113.GemsFDTD 115.fds4 121.pop2 122.tachyon 126.lammps 127.wrf2 128.GAPgeofem 129.tera_tf 130.socorro 132.zeusmp2 137.lu "Peak Other Flags" 104.milc 107.leslie3d 113.GemsFDTD 115.fds4 121.pop2 122.tachyon 126.lammps 127.wrf2 128.GAPgeofem 129.tera_tf 130.socorro 132.zeusmp2 137.lu "Peak Forbidden Flags" 104.milc 107.leslie3d 113.GemsFDTD 115.fds4 121.pop2 122.tachyon 126.lammps 127.wrf2 128.GAPgeofem 129.tera_tf 130.socorro 132.zeusmp2 137.lu "Peak Unknown Flags" 104.milc 107.leslie3d 113.GemsFDTD 115.fds4 121.pop2 122.tachyon 126.lammps 127.wrf2 128.GAPgeofem 129.tera_tf 130.socorro 132.zeusmp2 137.lu ---------------- "For questions about","this result, please","contact the tester.", "For other inquiries,","please contact",webmaster@spec.org., "Copyright 2006-2010 Standard","Performance Evaluation",Corporation, "Tested with SPEC MPI2007 ","v2.0.1. Report","generated on ","Fri Jul 15 14:09:37 2011","by SPEC MPI2007 CSV","formatter v1412."