valid,1 "Full Results Table" Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description 121.pop2,2048,68.967717,56.4177,0,S,2048,68.967717,56.4177,0,S,"lref(ref) iteration #1" 121.pop2,2048,58.594079,66.406027,1,S,2048,58.594079,66.406027,1,S,"lref(ref) iteration #2" 121.pop2,2048,58.577023,66.425363,0,S,2048,58.577023,66.425363,0,S,"lref(ref) iteration #3" 122.tachyon,2048,157.767964,12.321893,0,S,4608,171.423172,11.340357,0,S,"lref(ref) iteration #1" 122.tachyon,2048,67.552881,28.777455,1,S,4608,44.716547,43.47384,0,S,"lref(ref) iteration #2" 122.tachyon,2048,67.345399,28.866115,0,S,4608,45.021178,43.179679,1,S,"lref(ref) iteration #3" 125.RAxML,2048,92.740118,31.475052,0,S,4608,64.642248,45.156227,1,S,"lref(ref) iteration #1" 125.RAxML,2048,93.083094,31.359078,0,S,4608,65.04936,44.873616,0,S,"lref(ref) iteration #2" 125.RAxML,2048,92.932368,31.409939,1,S,4608,64.437061,45.300018,0,S,"lref(ref) iteration #3" 126.lammps,2048,60.360209,40.738759,0,S,4608,28.488817,86.31457,0,S,"lref(ref) iteration #1" 126.lammps,2048,60.003032,40.981262,1,S,4608,26.513026,92.746863,0,S,"lref(ref) iteration #2" 126.lammps,2048,59.971912,41.002528,0,S,4608,26.568253,92.554072,1,S,"lref(ref) iteration #3" 128.GAPgeofem,2048,79.859341,74.305647,0,S,3072,71.453285,83.047266,0,S,"lref(ref) iteration #1" 128.GAPgeofem,2048,80.040362,74.137596,1,S,3072,71.568998,82.912995,1,S,"lref(ref) iteration #2" 128.GAPgeofem,2048,80.134089,74.050882,0,S,3072,71.791819,82.655657,0,S,"lref(ref) iteration #3" 129.tera_tf,2048,46.531739,23.618288,1,S,4608,33.368499,32.935254,0,S,"lref(ref) iteration #1" 129.tera_tf,2048,46.507819,23.630435,0,S,4608,33.331138,32.972172,0,S,"lref(ref) iteration #2" 129.tera_tf,2048,46.551383,23.608321,0,S,4608,33.34962,32.953899,1,S,"lref(ref) iteration #3" 132.zeusmp2,2048,34.971135,60.621424,0,S,2048,34.971135,60.621424,0,S,"lref(ref) iteration #1" 132.zeusmp2,2048,36.525202,58.042116,1,S,2048,36.525202,58.042116,1,S,"lref(ref) iteration #2" 132.zeusmp2,2048,36.629208,57.877309,0,S,2048,36.629208,57.877309,0,S,"lref(ref) iteration #3" 137.lu,2048,32.629375,128.779666,0,S,2048,32.629375,128.779666,0,S,"lref(ref) iteration #1" 137.lu,2048,32.723361,128.409793,0,S,2048,32.723361,128.409793,0,S,"lref(ref) iteration #2" 137.lu,2048,32.673648,128.605168,1,S,2048,32.673648,128.605168,1,S,"lref(ref) iteration #3" 142.dmilc,2048,26.794937,137.488661,0,S,4608,21.372924,172.367618,0,S,"lref(ref) iteration #1" 142.dmilc,2048,26.918473,136.857689,1,S,4608,21.228007,173.544318,0,S,"lref(ref) iteration #2" 142.dmilc,2048,26.984831,136.521144,0,S,4608,21.262702,173.261141,1,S,"lref(ref) iteration #3" 143.dleslie,2048,29.701024,104.373506,0,S,2048,29.701024,104.373506,0,S,"lref(ref) iteration #1" 143.dleslie,2048,29.422557,105.361339,0,S,2048,29.422557,105.361339,0,S,"lref(ref) iteration #2" 143.dleslie,2048,29.621101,104.655124,1,S,2048,29.621101,104.655124,1,S,"lref(ref) iteration #3" 145.lGemsFDTD,2048,77.589984,56.850121,0,S,2560,77.238274,57.108992,1,S,"lref(ref) iteration #1" 145.lGemsFDTD,2048,77.589921,56.850167,1,S,2560,77.242953,57.105533,0,S,"lref(ref) iteration #2" 145.lGemsFDTD,2048,77.543724,56.884036,0,S,2560,77.232509,57.113255,0,S,"lref(ref) iteration #3" 147.l2wrf2,2048,90.201517,90.951907,1,S,4608,72.423934,113.27747,0,S,"lref(ref) iteration #1" 147.l2wrf2,2048,90.247174,90.905894,0,S,4608,72.201685,113.626157,1,S,"lref(ref) iteration #2" 147.l2wrf2,2048,90.16258,90.991185,0,S,4608,71.923122,114.066239,0,S,"lref(ref) iteration #3" "Selected Results Table" Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description 121.pop2,2048,58.594079,66.406027,1,S,2048,58.594079,66.406027,1,S,"SelectedIteration (base #2; peak #2)" 122.tachyon,2048,67.552881,28.777455,1,S,4608,45.021178,43.179679,1,S,"SelectedIteration (base #2; peak #3)" 125.RAxML,2048,92.932368,31.409939,1,S,4608,64.642248,45.156227,1,S,"SelectedIteration (base #3; peak #1)" 126.lammps,2048,60.003032,40.981262,1,S,4608,26.568253,92.554072,1,S,"SelectedIteration (base #2; peak #3)" 128.GAPgeofem,2048,80.040362,74.137596,1,S,3072,71.568998,82.912995,1,S,"SelectedIteration (base #2; peak #2)" 129.tera_tf,2048,46.531739,23.618288,1,S,4608,33.34962,32.953899,1,S,"SelectedIteration (base #1; peak #3)" 132.zeusmp2,2048,36.525202,58.042116,1,S,2048,36.525202,58.042116,1,S,"SelectedIteration (base #2; peak #2)" 137.lu,2048,32.673648,128.605168,1,S,2048,32.673648,128.605168,1,S,"SelectedIteration (base #3; peak #3)" 142.dmilc,2048,26.918473,136.857689,1,S,4608,21.262702,173.261141,1,S,"SelectedIteration (base #2; peak #3)" 143.dleslie,2048,29.621101,104.655124,1,S,2048,29.621101,104.655124,1,S,"SelectedIteration (base #3; peak #3)" 145.lGemsFDTD,2048,77.589921,56.850167,1,S,2560,77.238274,57.108992,1,S,"SelectedIteration (base #2; peak #1)" 147.l2wrf2,2048,90.201517,90.951907,1,S,4608,72.201685,113.626157,1,S,"SelectedIteration (base #1; peak #2)" SPECmpiL_base2007,60.450214,,60.450214 SPECmpiL_peak2007,74.398578,,,,,,,74.398578 "Run number:",047 "System Vendor:",SGI "System Name:","SGI Altix ICE 8400EX (Intel Xeon X5690, 3.46 GHz)" "Date tested:",Nov-2011 "MPI2007 License:",4 "Test sponsor:",SGI "Tested by:",SGI "Hardware avail:",Feb-2011 "Software avail:",Nov-2011 "Node Description: SGI Altix ICE 8400EX Compute Node" HARDWARE "Number of nodes",384 "Uses of the node",compute Vendor,SGI Model,"SGI Altix ICE 8400EX IP-105 (Intel Xeon X5690," ,"3.46 GHz)" "CPU Name","Intel Xeon X5690" "CPU(s) orderable","1-2 chips" "Chips enabled",2 "Cores enabled",12 "Cores per chip",6 "Threads per core",2 "CPU Characteristics","Six Core, 3.46 GHz, 6.4 GT/s QPI" ,"Intel Turbo Boost Technology up to 3.73 GHz" ,"Hyper-Threading Technology enabled" "CPU MHz",3467 "Primary Cache","32 KB I + 32 KB D on chip per core" "Secondary Cache","256 KB I+D on chip per core" "L3 Cache","12 MB I+D on chip per chip" "Other Cache",None Memory,"24 GB (6 x 4 GB 2Rx4 PC3-10600R-9, ECC)" "Disk Subsystem",None "Other Hardware",None Adapter,"Mellanox MT26428 ConnectX IB QDR" ,"(PCIe x8 Gen2 5 GT/s)" "Number of Adapters",2 "Slot Type","PCIe x8 Gen2" "Data Rate","InfiniBand 4x QDR" "Ports Used",1 "Interconnect Type",InfiniBand SOFTWARE Adapter,"Mellanox MT26428 ConnectX IB QDR" ,"(PCIe x8 Gen2 5 GT/s)" "Adapter Driver",OFED-1.5.2 "Adapter Firmware",2.7.8200 "Operating System","SUSE Linux Enterprise Server 11 SP1," ,"Kernel 2.6.32.43-0.4-default" "Local File System",NFSv3 "Shared File System","NFSv3 IPoIB" "System State","Multi-user, run level 3" "Other Software","SGI Performance Suite 1.2" ,"Build 704r5.sles11-1103212004" ,"SGI Tempo Compute Node 2.4," ,"Build 704rp74.sles11-1106302006" "Node Description: SGI InfiniteStorage Nexis 2000 NAS" HARDWARE "Number of nodes",1 "Uses of the node",fileserver Vendor,SGI Model,"SGI Altix XE 270 (Intel Xeon X5670, 2.93 GHz)" "CPU Name","Intel Xeon X5670" "CPU(s) orderable","1-2 chips" "Chips enabled",2 "Cores enabled",12 "Cores per chip",6 "Threads per core",2 "CPU Characteristics","Intel Turbo Boost Technology up to 3.33 GHz" ,"Hyper-Threading Technology enabled" "CPU MHz",2933 "Primary Cache","32 KB I + 32 KB D on chip per core" "Secondary Cache","256 KB I+D on chip per chip" "L3 Cache","12 MB I+D on chip per chip" "Other Cache",None Memory,"96 GB (12*8 GB DDR3-1333 CL9 DIMMs)" "Disk Subsystem","8.8 TB RAID 5" ,"60 x 146 GB SAS (Seagate Cheetah 15K.5)" "Other Hardware",None Adapter,"Mellanox MT26428 ConnectX IB QDR" ,"(PCIe x8 Gen2 5 GT/s)" "Number of Adapters",2 "Slot Type","PCIe x8 Gen2" "Data Rate","InfiniBand 4x QDR" "Ports Used",2 "Interconnect Type",InfiniBand SOFTWARE Adapter,"Mellanox MT26428 ConnectX IB QDR" ,"(PCIe x8 Gen2 5 GT/s)" "Adapter Driver",OFED-1.4.0 "Adapter Firmware",2.7.0 "Operating System","SUSE Linux Enterprise Server 11 (x86_64)" ,"Kernel 2.6.27.19-5-default" "Local File System",xfs "Shared File System",-- "System State","Multi-user, run level 3" "Other Software","SGI Foundation Software 2, Build" ,700r3.sles11-1004061553 "Interconnect Description: InfiniBand (MPI and I/O)" HARDWARE Vendor,"Mellanox Technologies and SGI" Model,None "Switch Model","SGI QDR_1.5_HYPR_2454 with Mellanox Device 48438" ,"(Infiniscale IV)" "Number of Switches",96 "Number of Ports",36 "Data Rate","InfiniBand 4x QDR" Firmware,5040005 Topology,"Enhanced Hypercube" "Primary Use","MPI and I/O traffic" "BENCHMARK DETAILS" "Type of System",Homogeneous "Total Compute Nodes",384 "Total Chips",768 "Total Cores",4608 "Total Threads",9216 "Total Memory","9 TB" "Base Ranks Run",2048 "Minimum Peak Ranks",2048 "Maximum Peak Ranks",4608 "C Compiler","Intel C++ Composer XE 2011 for Linux," ,"Version 12.1.0.233 Build 20110811" "C++ Compiler","Intel C++ Composer XE 2011 for Linux," ,"Version 12.1.0.233 Build 20110811" "Fortran Compiler","Intel Fortran Composer XE 2011 for Linux," ,"Version 12.1.0.233 Build 20110811" "Base Pointers",64-bit "Peak Pointers",64-bit "MPI Library","SGI MPT 2.05" "Other MPI Info","OFED 1.5.2" Pre-processors,None "Other Software",None "Submit Notes" "The config file option 'submit' was used." "For benchmarks that used 2048 or 2560 MPI ranks, four ranks" "were assigned to each CPU chip, leaving 2 cores per chip idle." "General Notes" " Software environment:" " export MPI_REQUEST_MAX=65536" " export MPI_TYPE_MAX=32768" " export MPI_BUFS_THRESHOLD=1" " export MPI_IB_RAILS=2" " ulimit -s unlimited" " BIOS settings:" " AMI BIOS version 080016" " Hyper-Threading Technology enabled (default)" " Intel Turbo Boost Technology enabled (default)" " Intel Turbo Boost Technology activated in the OS via" " /etc/init.d/acpid start" " /etc/init.d/powersaved start" " powersave -f" " Job Placement:" " In the run with 3072 and 4608 ranks, each MPI job was" " assigned to a topologically compact set of nodes with" " 64 switches for 3072 ranks and 96 switches for 4608 ranks." " In the run with 2048 and 2560 MPI ranks, four ranks were" " assigned to each CPU chip, leaving 2 cores per chip idle." " There were 64 switches used for 2048 ranks and 80 switches" " used for 2560 ranks, with topology compact configurations" " in both cases." " Additional notes regarding interconnect:" " The Infiniband network consists of two independent planes," " with half the switches in the system allocated to each plane." " I/O traffic is restricted to one plane, while MPI traffic can" " use both planes." " SGI manufactures its own switch blades using unmodified Mellanox" " switch ASICs. The test system has SGI QDR_1.5_HYPR_2454 switch" " with Mellanox 36-port QDR Infiniband switch Device 48438" " (InfiniScale IV)." "Base Compiler Invocation" 121.pop2," icc"," ifort"," ifort" 122.tachyon," icc"," icc" 125.RAxML," icc"," icc" 126.lammps," icpc"," icpc" 128.GAPgeofem," icc"," ifort"," icc"," ifort" 129.tera_tf," ifort"," ifort" 132.zeusmp2," icc"," ifort"," ifort" 137.lu," ifort"," ifort" 142.dmilc," icc"," icc" 143.dleslie," ifort"," ifort" 145.lGemsFDTD," ifort"," ifort" 147.l2wrf2," icc"," ifort"," ifort" "Base Portability Flags" 121.pop2," -DSPEC_MPI_CASE_FLAG" 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Base Optimization Flags" 121.pop2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 122.tachyon," -O3"," -xSSE4.2"," -no-prec-div" 125.RAxML," -O3"," -xSSE4.2"," -no-prec-div" 126.lammps," -O3"," -xSSE4.2"," -no-prec-div"," -ansi-alias" 128.GAPgeofem," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 129.tera_tf," -O3"," -xSSE4.2"," -no-prec-div" 132.zeusmp2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 137.lu," -O3"," -xSSE4.2"," -no-prec-div" 142.dmilc," -O3"," -xSSE4.2"," -no-prec-div" 143.dleslie," -O3"," -xSSE4.2"," -no-prec-div" 145.lGemsFDTD," -O3"," -xSSE4.2"," -no-prec-div" 147.l2wrf2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" "Base Other Flags" 121.pop2," -lmpi" 122.tachyon," -lmpi" 125.RAxML," -lmpi" 126.lammps," -lmpi" 128.GAPgeofem," -lmpi" 129.tera_tf," -lmpi" 132.zeusmp2," -lmpi" 137.lu," -lmpi" 142.dmilc," -lmpi" 143.dleslie," -lmpi" 145.lGemsFDTD," -lmpi" 147.l2wrf2," -lmpi" "Base Forbidden Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Base Unknown Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Peak Compiler Invocation" 121.pop2," icc"," ifort"," ifort" 122.tachyon," icc"," icc" 125.RAxML," icc"," icc" 126.lammps," icpc"," icpc" 128.GAPgeofem," icc"," ifort"," icc"," ifort" 129.tera_tf," ifort"," ifort" 132.zeusmp2," icc"," ifort"," ifort" 137.lu," ifort"," ifort" 142.dmilc," icc"," icc" 143.dleslie," ifort"," ifort" 145.lGemsFDTD," ifort"," ifort" 147.l2wrf2," icc"," ifort"," ifort" "Peak Portability Flags" 121.pop2," -DSPEC_MPI_CASE_FLAG" 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Peak Optimization Flags" 121.pop2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 122.tachyon," -O3"," -xSSE4.2"," -no-prec-div" 125.RAxML," -O3"," -xSSE4.2"," -no-prec-div" 126.lammps," -O3"," -xSSE4.2"," -no-prec-div"," -ansi-alias" 128.GAPgeofem," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 129.tera_tf," -O3"," -xSSE4.2"," -no-prec-div" 132.zeusmp2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 137.lu," -O3"," -xSSE4.2"," -no-prec-div" 142.dmilc," -O3"," -xSSE4.2"," -no-prec-div" 143.dleslie," -O3"," -xSSE4.2"," -no-prec-div" 145.lGemsFDTD," -O3"," -xSSE4.2"," -no-prec-div" 147.l2wrf2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" "Peak Other Flags" 121.pop2," -lmpi" 122.tachyon," -lmpi" 125.RAxML," -lmpi" 126.lammps," -lmpi" 128.GAPgeofem," -lmpi" 129.tera_tf," -lmpi" 132.zeusmp2," -lmpi" 137.lu," -lmpi" 142.dmilc," -lmpi" 143.dleslie," -lmpi" 145.lGemsFDTD," -lmpi" 147.l2wrf2," -lmpi" "Peak Forbidden Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Peak Unknown Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 ---------------- "For questions about","this result, please","contact the tester.", "For other inquiries,","please contact",webmaster@spec.org., "Copyright 2006-2010 Standard","Performance Evaluation",Corporation, "Tested with SPEC MPI2007 ","v2.0.1. Report","generated on ","Wed Nov 30 11:16:41 2011","by SPEC MPI2007 CSV","formatter v1412."