valid,1

"Full Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,64,3012.55234,1.291596,0,S,,,,,,"lref(ref) iteration #1"
121.pop2,64,3011.931368,1.291862,1,S,,,,,,"lref(ref) iteration #2"
121.pop2,64,3011.132659,1.292205,0,S,,,,,,"lref(ref) iteration #3"
122.tachyon,64,3542.60742,0.548748,1,S,,,,,,"lref(ref) iteration #1"
122.tachyon,64,3539.959958,0.549159,0,S,,,,,,"lref(ref) iteration #2"
122.tachyon,64,3546.086773,0.54821,0,S,,,,,,"lref(ref) iteration #3"
125.RAxML,64,4697.678549,0.621371,0,S,,,,,,"lref(ref) iteration #1"
125.RAxML,64,4708.827623,0.6199,0,S,,,,,,"lref(ref) iteration #2"
125.RAxML,64,4705.257915,0.62037,1,S,,,,,,"lref(ref) iteration #3"
126.lammps,64,2522.884092,0.974678,0,S,,,,,,"lref(ref) iteration #1"
126.lammps,64,2519.165693,0.976117,1,S,,,,,,"lref(ref) iteration #2"
126.lammps,64,2515.246584,0.977638,0,S,,,,,,"lref(ref) iteration #3"
128.GAPgeofem,64,3719.692621,1.595293,1,S,,,,,,"lref(ref) iteration #1"
128.GAPgeofem,64,3721.098293,1.59469,0,S,,,,,,"lref(ref) iteration #2"
128.GAPgeofem,64,3715.57186,1.597062,0,S,,,,,,"lref(ref) iteration #3"
129.tera_tf,64,1492.96688,0.736118,0,S,,,,,,"lref(ref) iteration #1"
129.tera_tf,64,1491.254554,0.736963,1,S,,,,,,"lref(ref) iteration #2"
129.tera_tf,64,1490.899888,0.737139,0,S,,,,,,"lref(ref) iteration #3"
132.zeusmp2,64,1703.866882,1.244229,0,S,,,,,,"lref(ref) iteration #1"
132.zeusmp2,64,1701.754913,1.245773,1,S,,,,,,"lref(ref) iteration #2"
132.zeusmp2,64,1700.934279,1.246374,0,S,,,,,,"lref(ref) iteration #3"
137.lu,64,2766.899059,1.518668,1,S,,,,,,"lref(ref) iteration #1"
137.lu,64,2770.657305,1.516608,0,S,,,,,,"lref(ref) iteration #2"
137.lu,64,2764.629331,1.519914,0,S,,,,,,"lref(ref) iteration #3"
142.dmilc,64,1211.647014,3.040489,1,S,,,,,,"lref(ref) iteration #1"
142.dmilc,64,1211.707783,3.040337,0,S,,,,,,"lref(ref) iteration #2"
142.dmilc,64,1211.090946,3.041886,0,S,,,,,,"lref(ref) iteration #3"
143.dleslie,64,1730.882052,1.790994,0,S,,,,,,"lref(ref) iteration #1"
143.dleslie,64,1730.645743,1.791239,1,S,,,,,,"lref(ref) iteration #2"
143.dleslie,64,1729.907905,1.792003,0,S,,,,,,"lref(ref) iteration #3"
145.lGemsFDTD,64,2636.094432,1.673309,0,S,,,,,,"lref(ref) iteration #1"
145.lGemsFDTD,64,2636.004329,1.673366,1,S,,,,,,"lref(ref) iteration #2"
145.lGemsFDTD,64,2635.844277,1.673468,0,S,,,,,,"lref(ref) iteration #3"
147.l2wrf2,64,4916.070279,1.668813,0,S,,,,,,"lref(ref) iteration #1"
147.l2wrf2,64,4915.258458,1.669088,1,S,,,,,,"lref(ref) iteration #2"
147.l2wrf2,64,4914.886125,1.669215,0,S,,,,,,"lref(ref) iteration #3"

"Selected Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,64,3011.931368,1.291862,1,S,,,,,NR,"SelectedIteration (base #2)"
122.tachyon,64,3542.60742,0.548748,1,S,,,,,NR,"SelectedIteration (base #1)"
125.RAxML,64,4705.257915,0.62037,1,S,,,,,NR,"SelectedIteration (base #3)"
126.lammps,64,2519.165693,0.976117,1,S,,,,,NR,"SelectedIteration (base #2)"
128.GAPgeofem,64,3719.692621,1.595293,1,S,,,,,NR,"SelectedIteration (base #1)"
129.tera_tf,64,1491.254554,0.736963,1,S,,,,,NR,"SelectedIteration (base #2)"
132.zeusmp2,64,1701.754913,1.245773,1,S,,,,,NR,"SelectedIteration (base #2)"
137.lu,64,2766.899059,1.518668,1,S,,,,,NR,"SelectedIteration (base #1)"
142.dmilc,64,1211.647014,3.040489,1,S,,,,,NR,"SelectedIteration (base #1)"
143.dleslie,64,1730.645743,1.791239,1,S,,,,,NR,"SelectedIteration (base #2)"
145.lGemsFDTD,64,2636.004329,1.673366,1,S,,,,,NR,"SelectedIteration (base #2)"
147.l2wrf2,64,4915.258458,1.669088,1,S,,,,,NR,"SelectedIteration (base #2)"

SPECmpiL_base2007,1.249803,,1.249803
SPECmpiL_peak2007,"Not Run",,,,,,,"Not Run"

"Run number:",149

"System Vendor:",SGI
"System Name:","SGI Altix ICE 8400EX (AMD Opteron 6282 SE, 2.6GHz)"
"Date tested:",Jan-2012
"MPI2007 License:",4
"Test sponsor:",SGI
"Tested by:",SGI
"Hardware avail:",Nov-2011
"Software avail:",Nov-2011


"Node Description: SGI Altix ICE 8400EX Compute Node"

HARDWARE

"Number of nodes",2
"Uses of the node",compute
Vendor,SGI
Model,"SGI Altix ICE 8400EX (AMD Opteron 6282 SE, 2.6GHz)"
"CPU Name","AMD Opteron 6282 SE"
"CPU(s) orderable","1-2 chips"
"Chips enabled",2
"Cores enabled",32
"Cores per chip",16
"Threads per core",1
"CPU Characteristics","16 cores/chip, 2.6 GHz"
,"AMD Turbo CORE technology up to 3.30 GHz"
"CPU MHz",2600
"Primary Cache","512 KB I on chip per chip,"
,"64 KB I shared / 2 cores;"
,"16 KB D on chip per core"
"Secondary Cache","16 MB I+D on chip per chip, 2 MB I+D on chip per"
,core
"L3 Cache","16 MB I+D on chip per chip, 8 MB shared / 8 cores"
"Other Cache",None
Memory,"128 GB (16 x 8 GB 2Rx4 PC3-12800R-11, ECC)"
"Disk Subsystem",None
"Other Hardware",None
Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Number of Adapters",1
"Slot Type","PCIe x8 Gen2"
"Data Rate","InfiniBand 4x QDR"
"Ports Used",2
"Interconnect Type",InfiniBand

SOFTWARE

Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Adapter Driver",OFED-1.5.2
"Adapter Firmware",2.7.0
"Operating System","SUSE Linux Enterprise Server 11 SP1  (x86_64)"
,"Kernel 2.6.32.46-0.3-default #1 SMP"
"Local File System",NFSv3
"Shared File System","NFSv3 IPoIB"
"System State","Run level 3 (Multi-User)"
"Other Software","SGI Performance Suite 1.3,"
,"Build 705rp8.sles11-1111092106"
,"SGI Tempo Compute Node 2.5,"
,"Build 705r10.sles11-1110192111"


"Node Description: SGI InfiniteStorage 4000"

HARDWARE

"Number of nodes",1
"Uses of the node",fileserver
Vendor,SGI
Model,"SGI Altix 450 (Intel Itanium 2, 1.6GHz)"
"CPU Name","Intel Itanium 2 9030"
"CPU(s) orderable","2-38 chips"
"Chips enabled",2
"Cores enabled",4
"Cores per chip",2
"Threads per core",1
"CPU Characteristics","1.6GHz/8MB, 533MHz FSB"
"CPU MHz",1600
"Primary Cache","16 KB I + 16 KB D on chip per core"
"Secondary Cache","1 MB I + 256 KB D on chip per core"
"L3 Cache","4 MB I+D on chip per core"
"Other Cache",None
Memory,"24 GB (12 x 2 GB, 2Rx4 PC2-3200-3, ECC)"
"Disk Subsystem","16 TB RAID 5"
,"32 x 500 GB SATA (Seagate Barracuda 7.2K)"
"Other Hardware",None
Adapter,"Mellanox MT25208 InfiniHost III Ex"
,"(PCIe x8 Gen1 2.5 GT/s)"
"Number of Adapters",2
"Slot Type","PCIe x8 Gen1"
"Data Rate","InfiniBand 4x DDR"
"Ports Used",2
"Interconnect Type",InfiniBand

SOFTWARE

Adapter,"Mellanox MT25208 InfiniHost III Ex"
,"(PCIe x8 Gen1 2.5 GT/s)"
"Adapter Driver",OFED-1.4.2
"Adapter Firmware",5.3.0
"Operating System","SUSE Linux Enterprise Server 11 SP1  (ia64)"
,"Kernel 2.6.32.12-0.7-default"
"Local File System",xfs
"Shared File System",--
"System State","Run Level 3 (Multi-User)"
"Other Software","SGI ProPack 7SP1 for Linux,"
,"Build 701r2.sles11-1005242307"


"Interconnect Description: InfiniBand (MPI and I/O)"

HARDWARE

Vendor,"Mellanox Technologies and SGI"
Model,None
"Switch Model","SGI QDR_1.5_HYPR_2454 with Mellanox Device 48438"
,"(Infiniscale IV)"
"Number of Switches",2
"Number of Ports",36
"Data Rate","InfiniBand 4x QDR"
Firmware,5040005
Topology,"Enhanced Hypercube"
"Primary Use","MPI and I/O traffic"


"BENCHMARK DETAILS"

"Type of System",Homogeneous
"Total Compute Nodes",2
"Total Chips",4
"Total Cores",64
"Total Threads",64
"Total Memory","256 GB"
"Base Ranks Run",64
"Minimum Peak Ranks",--
"Maximum Peak Ranks",--
"C Compiler","Intel C++ Composer XE 2011 for Linux,"
,"Version 12.1.1.256  Build 20111011"
"C++ Compiler","Intel C++ Composer XE 2011 for Linux,"
,"Version 12.1.1.256 Build 20111011"
"Fortran Compiler","Intel Fortran Composer XE 2011 for Linux,"
,"Version 12.1.1.256 Build 20111011"
"Base Pointers",64-bit
"Peak Pointers",64-bit
"MPI Library","SGI MPT 2.05"
"Other MPI Info","OFED 1.5.2"
Pre-processors,None
"Other Software",None

"Submit Notes"

"The config file option 'submit' was used."

"General Notes"

" Software environment:"
"   export MPI_REQUEST_MAX=65536"
"   export MPI_TYPE_MAX=32768"
"   export MPI_BUFS_THRESHOLD=1"
"   export MPI_IB_RAILS=2"
"   ulimit -s unlimited"

" BIOS settings:"
"   AMI BIOS version 2.0"

" Job Placement:"
"   In the base run, each MPI job is assigned to a topologically compact"
"   set of nodes, i.e. the minimal needed number of switches was"
"   used for each job: 2 switch for up to 256 ranks, 4 switches"
"   for 512 ranks, 8 switches for 1024 ranks."

" Additional notes regarding interconnect:"
"   The Infiniband network consists of two independent planes,"
"   with half the switches in the system allocated to each plane."
"   I/O traffic is restricted to one plane, while MPI traffic can"
"   use both planes."

"   SGI manufactures its own switch blades using unmodified Mellanox"
"   switch ASICs. The test system has SGI QDR_1.5_HYPR_2454 switch"
"   with Mellanox 36-port QDR Infiniband switch Device 48438"
"   (InfiniScale IV)."

"Base Compiler Invocation"
121.pop2," icc"," ifort"," ifort"
122.tachyon," icc"," icc"
125.RAxML," icc"," icc"
126.lammps," icpc"," icpc"
128.GAPgeofem," icc"," ifort"," icc"," ifort"
129.tera_tf," ifort"," ifort"
132.zeusmp2," icc"," ifort"," ifort"
137.lu," ifort"," ifort"
142.dmilc," icc"," icc"
143.dleslie," ifort"," ifort"
145.lGemsFDTD," ifort"," ifort"
147.l2wrf2," icc"," ifort"," ifort"

"Base Portability Flags"
121.pop2," -DSPEC_MPI_CASE_FLAG"
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Optimization Flags"
121.pop2," -O3"," -xSSE2"," -ipo"," -no-prec-div"," -O3"," -xSSE2"," -ipo"," -no-prec-div"
122.tachyon," -O3"," -xSSE2"," -ipo"," -no-prec-div"
125.RAxML," -O3"," -xSSE2"," -ipo"," -no-prec-div"
126.lammps," -O3"," -xSSE2"," -ipo"," -no-prec-div"," -ansi-alias"
128.GAPgeofem," -O3"," -xSSE2"," -ipo"," -no-prec-div"," -O3"," -xSSE2"," -ipo"," -no-prec-div"
129.tera_tf," -O3"," -xSSE2"," -ipo"," -no-prec-div"
132.zeusmp2," -O3"," -xSSE2"," -ipo"," -no-prec-div"," -O3"," -xSSE2"," -ipo"," -no-prec-div"
137.lu," -O3"," -xSSE2"," -ipo"," -no-prec-div"
142.dmilc," -O3"," -xSSE2"," -ipo"," -no-prec-div"
143.dleslie," -O3"," -xSSE2"," -ipo"," -no-prec-div"
145.lGemsFDTD," -O3"," -xSSE2"," -ipo"," -no-prec-div"
147.l2wrf2," -O3"," -xSSE2"," -ipo"," -no-prec-div"," -O3"," -xSSE2"," -ipo"," -no-prec-div"

"Base Other Flags"
121.pop2," -lmpi"
122.tachyon," -lmpi"
125.RAxML," -lmpi"
126.lammps," -lmpi"
128.GAPgeofem," -lmpi"
129.tera_tf," -lmpi"
132.zeusmp2," -lmpi"
137.lu," -lmpi"
142.dmilc," -lmpi"
143.dleslie," -lmpi"
145.lGemsFDTD," -lmpi"
147.l2wrf2," -lmpi"

"Base Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Compiler Invocation"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Portability Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Optimization Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Other Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2
----------------
"For questions about","this result, please","contact the tester.",
"For other inquiries,","please contact",webmaster@spec.org.,
"Copyright 2006-2010 Standard","Performance Evaluation",Corporation,
"Tested with SPEC MPI2007 ","v2.0.1.  Report","generated on ","Wed Feb  8 11:34:39 2012","by SPEC MPI2007 CSV","formatter v1412."