valid,1 "Full Results Table" Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description 121.pop2,128,917.978021,4.238664,1,S,,,,,,"lref(ref) iteration #1" 121.pop2,128,916.551444,4.245261,0,S,,,,,,"lref(ref) iteration #2" 121.pop2,128,926.422218,4.200029,0,S,,,,,,"lref(ref) iteration #3" 122.tachyon,128,933.135436,2.083299,0,S,,,,,,"lref(ref) iteration #1" 122.tachyon,128,931.874896,2.086117,0,S,,,,,,"lref(ref) iteration #2" 122.tachyon,128,932.673042,2.084332,1,S,,,,,,"lref(ref) iteration #3" 125.RAxML,128,1845.879167,1.58136,0,S,,,,,,"lref(ref) iteration #1" 125.RAxML,128,1845.501737,1.581684,0,S,,,,,,"lref(ref) iteration #2" 125.RAxML,128,1845.611719,1.581589,1,S,,,,,,"lref(ref) iteration #3" 126.lammps,128,778.411372,3.158998,0,S,,,,,,"lref(ref) iteration #1" 126.lammps,128,778.426961,3.158935,1,S,,,,,,"lref(ref) iteration #2" 126.lammps,128,779.727093,3.153668,0,S,,,,,,"lref(ref) iteration #3" 128.GAPgeofem,128,1133.383475,5.235651,0,S,,,,,,"lref(ref) iteration #1" 128.GAPgeofem,128,1135.741738,5.224779,1,S,,,,,,"lref(ref) iteration #2" 128.GAPgeofem,128,1141.045073,5.200496,0,S,,,,,,"lref(ref) iteration #3" 129.tera_tf,128,533.895061,2.058457,1,S,,,,,,"lref(ref) iteration #1" 129.tera_tf,128,523.664387,2.098672,0,S,,,,,,"lref(ref) iteration #2" 129.tera_tf,128,535.005802,2.054183,0,S,,,,,,"lref(ref) iteration #3" 132.zeusmp2,128,505.316207,4.195393,0,S,,,,,,"lref(ref) iteration #1" 132.zeusmp2,128,504.429142,4.202771,1,S,,,,,,"lref(ref) iteration #2" 132.zeusmp2,128,504.146242,4.205129,0,S,,,,,,"lref(ref) iteration #3" 137.lu,128,703.022435,5.97705,0,S,,,,,,"lref(ref) iteration #1" 137.lu,128,719.360602,5.841298,0,S,,,,,,"lref(ref) iteration #2" 137.lu,128,712.593591,5.896769,1,S,,,,,,"lref(ref) iteration #3" 142.dmilc,128,365.977061,10.066205,0,S,,,,,,"lref(ref) iteration #1" 142.dmilc,128,366.136333,10.061826,0,S,,,,,,"lref(ref) iteration #2" 142.dmilc,128,366.012042,10.065243,1,S,,,,,,"lref(ref) iteration #3" 143.dleslie,128,548.252263,5.654331,1,S,,,,,,"lref(ref) iteration #1" 143.dleslie,128,549.205193,5.644521,0,S,,,,,,"lref(ref) iteration #2" 143.dleslie,128,548.103499,5.655866,0,S,,,,,,"lref(ref) iteration #3" 145.lGemsFDTD,128,710.903019,6.204784,0,S,,,,,,"lref(ref) iteration #1" 145.lGemsFDTD,128,711.17148,6.202442,1,S,,,,,,"lref(ref) iteration #2" 145.lGemsFDTD,128,711.55674,6.199084,0,S,,,,,,"lref(ref) iteration #3" 147.l2wrf2,128,1351.720984,6.0693,0,S,,,,,,"lref(ref) iteration #1" 147.l2wrf2,128,1358.37725,6.039559,0,S,,,,,,"lref(ref) iteration #2" 147.l2wrf2,128,1355.537886,6.05221,1,S,,,,,,"lref(ref) iteration #3" "Selected Results Table" Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description 121.pop2,128,917.978021,4.238664,1,S,,,,,NR,"SelectedIteration (base #1)" 122.tachyon,128,932.673042,2.084332,1,S,,,,,NR,"SelectedIteration (base #3)" 125.RAxML,128,1845.611719,1.581589,1,S,,,,,NR,"SelectedIteration (base #3)" 126.lammps,128,778.426961,3.158935,1,S,,,,,NR,"SelectedIteration (base #2)" 128.GAPgeofem,128,1135.741738,5.224779,1,S,,,,,NR,"SelectedIteration (base #2)" 129.tera_tf,128,533.895061,2.058457,1,S,,,,,NR,"SelectedIteration (base #1)" 132.zeusmp2,128,504.429142,4.202771,1,S,,,,,NR,"SelectedIteration (base #2)" 137.lu,128,712.593591,5.896769,1,S,,,,,NR,"SelectedIteration (base #3)" 142.dmilc,128,366.012042,10.065243,1,S,,,,,NR,"SelectedIteration (base #3)" 143.dleslie,128,548.252263,5.654331,1,S,,,,,NR,"SelectedIteration (base #1)" 145.lGemsFDTD,128,711.17148,6.202442,1,S,,,,,NR,"SelectedIteration (base #2)" 147.l2wrf2,128,1355.537886,6.05221,1,S,,,,,NR,"SelectedIteration (base #3)" SPECmpiL_base2007,4.137036,,4.137036 SPECmpiL_peak2007,"Not Run",,,,,,,"Not Run" "Run number:",003 "System Vendor:",SGI "System Name:","SGI Altix ICE 8200EX (Intel Xeon X5560, 2.80 GHz)" "Date tested:",Jan-2010 "MPI2007 License:",4 "Test sponsor:",SGI "Tested by:",SGI "Hardware avail:",Sep-2009 "Software avail:",Dec-2009 "Node Description: SGI Altix ICE 8200EX Compute Node" HARDWARE "Number of nodes",16 "Uses of the node",compute Vendor,SGI Model,"SGI Altix ICE 8200EX (Intel Xeon X5560, 2.80 GHz)" "CPU Name","Intel Xeon X5560" "CPU(s) orderable","1-2 chips" "Chips enabled",2 "Cores enabled",8 "Cores per chip",4 "Threads per core",2 "CPU Characteristics","Intel Turbo Boost Technology up to 3.2 GHz," ,"6.4 GT/s QPI, Hyper-Threading enabled" "CPU MHz",2800 "Primary Cache","32 KB I + 32 KB D on chip per core" "Secondary Cache","256 KB I+D on chip per core" "L3 Cache","8 MB I+D on chip per chip" "Other Cache",None Memory,"36 GB (6*4GB + 6*2GB DDR3-1333 CL9 RDIMMs running" ,"at 1066 MHZ. The 4GB DIMM is installed in DIMM" ,"slot A in each channel.)" "Disk Subsystem",None "Other Hardware",None Adapter,"Mellanox MT26418 ConnectX IB DDR" ,"(PCIe x8 Gen2 5 GT/s)" "Number of Adapters",1 "Slot Type","PCIe x8 Gen2" "Data Rate","InfiniBand 4x DDR" "Ports Used",2 "Interconnect Type",InfiniBand SOFTWARE Adapter,"Mellanox MT26418 ConnectX IB DDR" ,"(PCIe x8 Gen2 5 GT/s)" "Adapter Driver",OFED-1.4.1 "Adapter Firmware",2.6.0 "Operating System","SUSE Linux Enterprise Server 10 (x86_64) SP2" ,"Kernel 2.6.16.60-0.30-smp" "Local File System",None "Shared File System","NFSv3 IPoIB" "System State","Multi-user, run level 3" "Other Software","SGI ProPack 6 for Linux Service Pack 5, SGI Tempo" ,"V 1.9" "Node Description: SGI InfiniteStorage Nexis 2000 NAS" HARDWARE "Number of nodes",1 "Uses of the node",fileserver Vendor,SGI Model,"SGI Altix XE 240 (Intel Xeon 5140, 2.33 GHz)" "CPU Name","Intel Xeon 5140" "CPU(s) orderable","1-2 chips" "Chips enabled",2 "Cores enabled",4 "Cores per chip",2 "Threads per core",1 "CPU Characteristics","1333 MHz FSB" "CPU MHz",2333 "Primary Cache","32 KB I + 32 KB D on chip per core" "Secondary Cache","4 MB I+D on chip per chip" "L3 Cache",None "Other Cache",None Memory,"16 GB (8*2GB DDR2-667MHz DIMMS)" "Disk Subsystem","4.3 TB RAID 5" ,"48 x 146 GB SAS (Seagate Cheetah 15K.5)" "Other Hardware",None Adapter,"Mellanox MT26418 ConnectX IB DDR" ,"(PCIe x8 Gen2 5 GT/s)" "Number of Adapters",2 "Slot Type","PCIe x8 Gen2" "Data Rate","InfiniBand 4x DDR" "Ports Used",2 "Interconnect Type",InfiniBand SOFTWARE Adapter,"Mellanox MT26418 ConnectX IB DDR" ,"(PCIe x8 Gen2 5 GT/s)" "Adapter Driver",OFED-1.4.1 "Adapter Firmware",2.3.0 "Operating System","SUSE Linux Enterprise Server 10 (x86_64) SP1" ,"Kernel 2.6.16.54-0.2.5-smp" "Local File System",xfs "Shared File System",-- "System State","Multi-user, run level 3" "Other Software","SGI ProPack 5 for Linux Service Pack 5" "Interconnect Description: InfiniBand (MPI)" HARDWARE Vendor,"Mellanox Technologies" Model,"MT26418 ConnectX" "Switch Model","Mellanox MT48436 InfiniScale-IV" "Number of Switches",128 "Number of Ports",36 "Data Rate","InfiniBand 4x QDR" Firmware,4020001 Topology,"Bristle hypercube with double dimensional links" "Primary Use","MPI traffic" "Interconnect Description: InfiniBand (I/O)" HARDWARE Vendor,"Mellanox Technologies" Model,"MT26418 ConnectX" "Switch Model","Mellanox MT48436 InfiniScale-IV" "Number of Switches",64 "Number of Ports",36 "Data Rate","InfiniBand 4x QDR" Firmware,4020001 Topology,"Bristle hypercube with double dimensional links" "Primary Use","I/O traffic" "BENCHMARK DETAILS" "Type of System",Homogeneous "Total Compute Nodes",16 "Total Chips",32 "Total Cores",128 "Total Threads",256 "Total Memory","576 GB" "Base Ranks Run",128 "Minimum Peak Ranks",-- "Maximum Peak Ranks",-- "C Compiler","Intel C Compiler for Linux" ,"Version 11.1, Build 20091130" "C++ Compiler","Intel C++ Compiler for Linux" ,"Version 11.1, Build 20091130" "Fortran Compiler","Intel Fortran Compiler for Linux" ,"Version 11.1, Build 20091130" "Base Pointers",64-bit "Peak Pointers",64-bit "MPI Library","SGI MPT 1.25" "Other MPI Info",OFED-1.4.1 Pre-processors,None "Other Software",None "Submit Notes" "The config file option 'submit' was used." "General Notes" " Software environment:" " export MPI_REQUEST_MAX=65536" " export MPI_TYPE_MAX=32768" " export MPI_BUFS_THRESHOLD=1" " export MPI_DSM_DISTRIBUTE=yes" " export MPI_IB_RAILS=2" " ulimit -s unlimited" " BIOS settings:" " AMI BIOS version 8.15" " Hyper-Threading Technology enabled (default)" " Intel Turbo Boost Technology enabled (default)" " Intel Turbo Boost Technology activated in the OS via" " /etc/init.d/acpid start" " /etc/init.d/powersaved start" " powersave -f" " Interconnect Data Rate:" " The system interconnect has DDR InfiniBand HCAs," " while the switches and cables run up to QDR rate." " Job Placement:" " Each MPI job was assigned to a topologically compact set" " of nodes, i.e. the minimal needed number of switches was" " used for each job: 2 switches for 16/32/64 ranks," " 4 switches for 128 ranks, 8 switches for 256 ranks," " 16 switches for 512 ranks, 32 switches for 1024 ranks," " 64 switches for 2048 ranks and 128 switches for" " 4096 ranks." "Base Compiler Invocation" 121.pop2," icc"," ifort"," ifort" 122.tachyon," icc"," icc" 125.RAxML," icc"," icc" 126.lammps," icpc"," icpc" 128.GAPgeofem," icc"," ifort"," icc"," ifort" 129.tera_tf," ifort"," ifort" 132.zeusmp2," icc"," ifort"," ifort" 137.lu," ifort"," ifort" 142.dmilc," icc"," icc" 143.dleslie," ifort"," ifort" 145.lGemsFDTD," ifort"," ifort" 147.l2wrf2," icc"," ifort"," ifort" "Base Portability Flags" 121.pop2," -DSPEC_MPI_CASE_FLAG" 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Base Optimization Flags" 121.pop2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 122.tachyon," -O3"," -xSSE4.2"," -no-prec-div" 125.RAxML," -O3"," -xSSE4.2"," -no-prec-div" 126.lammps," -O3"," -xSSE4.2"," -no-prec-div"," -ansi-alias" 128.GAPgeofem," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 129.tera_tf," -O3"," -xSSE4.2"," -no-prec-div" 132.zeusmp2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" 137.lu," -O3"," -xSSE4.2"," -no-prec-div" 142.dmilc," -O3"," -xSSE4.2"," -no-prec-div" 143.dleslie," -O3"," -xSSE4.2"," -no-prec-div" 145.lGemsFDTD," -O3"," -xSSE4.2"," -no-prec-div" 147.l2wrf2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div" "Base Other Flags" 121.pop2," -lmpi" 122.tachyon," -lmpi" 125.RAxML," -lmpi" 126.lammps," -lmpi" 128.GAPgeofem," -lmpi" 129.tera_tf," -lmpi" 132.zeusmp2," -lmpi" 137.lu," -lmpi" 142.dmilc," -lmpi" 143.dleslie," -lmpi" 145.lGemsFDTD," -lmpi" 147.l2wrf2," -lmpi" "Base Forbidden Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Base Unknown Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Peak Compiler Invocation" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Peak Portability Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Peak Optimization Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Peak Other Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Peak Forbidden Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 "Peak Unknown Flags" 121.pop2 122.tachyon 125.RAxML 126.lammps 128.GAPgeofem 129.tera_tf 132.zeusmp2 137.lu 142.dmilc 143.dleslie 145.lGemsFDTD 147.l2wrf2 ---------------- "For questions about","this result, please","contact the tester.", "For other inquiries,","please contact",webmaster@spec.org., "Copyright 2006-2010 Standard","Performance Evaluation",Corporation, "Tested with SPEC MPI2007 ","v85. Report","generated on ","Mon Jul 19 17:13:41 2010","by SPEC MPI2007 CSV","formatter v1412."