valid,1

"Full Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,384,381.179614,10.207786,0,S,,,,,,"lref(ref) iteration #1"
121.pop2,384,378.957654,10.267638,0,S,,,,,,"lref(ref) iteration #2"
121.pop2,384,379.913421,10.241807,1,S,,,,,,"lref(ref) iteration #3"
122.tachyon,384,275.281493,7.061862,0,S,,,,,,"lref(ref) iteration #1"
122.tachyon,384,271.154408,7.169347,1,S,,,,,,"lref(ref) iteration #2"
122.tachyon,384,271.069135,7.171602,0,S,,,,,,"lref(ref) iteration #3"
125.RAxML,384,364.400266,8.010422,0,S,,,,,,"lref(ref) iteration #1"
125.RAxML,384,364.48562,8.008546,1,S,,,,,,"lref(ref) iteration #2"
125.RAxML,384,364.48981,8.008454,0,S,,,,,,"lref(ref) iteration #3"
126.lammps,384,229.584089,10.710673,0,S,,,,,,"lref(ref) iteration #1"
126.lammps,384,231.291639,10.631599,0,S,,,,,,"lref(ref) iteration #2"
126.lammps,384,230.011177,10.690785,1,S,,,,,,"lref(ref) iteration #3"
128.GAPgeofem,384,300.30322,19.760028,0,S,,,,,,"lref(ref) iteration #1"
128.GAPgeofem,384,318.21892,18.64754,1,S,,,,,,"lref(ref) iteration #2"
128.GAPgeofem,384,332.852957,17.827692,0,S,,,,,,"lref(ref) iteration #3"
129.tera_tf,384,149.363562,7.357886,1,S,,,,,,"lref(ref) iteration #1"
129.tera_tf,384,149.116375,7.370083,0,S,,,,,,"lref(ref) iteration #2"
129.tera_tf,384,149.371432,7.357498,0,S,,,,,,"lref(ref) iteration #3"
132.zeusmp2,384,153.075179,13.849404,1,S,,,,,,"lref(ref) iteration #1"
132.zeusmp2,384,153.105198,13.846689,0,S,,,,,,"lref(ref) iteration #2"
132.zeusmp2,384,153.057384,13.851014,0,S,,,,,,"lref(ref) iteration #3"
137.lu,384,171.177874,24.547565,0,S,,,,,,"lref(ref) iteration #1"
137.lu,384,171.909028,24.443161,0,S,,,,,,"lref(ref) iteration #2"
137.lu,384,171.549156,24.494437,1,S,,,,,,"lref(ref) iteration #3"
142.dmilc,384,143.197906,25.726633,0,S,,,,,,"lref(ref) iteration #1"
142.dmilc,384,143.134115,25.738099,1,S,,,,,,"lref(ref) iteration #2"
142.dmilc,384,143.130129,25.738816,0,S,,,,,,"lref(ref) iteration #3"
143.dleslie,384,181.720824,17.059135,0,S,,,,,,"lref(ref) iteration #1"
143.dleslie,384,183.16554,16.924581,0,S,,,,,,"lref(ref) iteration #2"
143.dleslie,384,181.905247,17.041839,1,S,,,,,,"lref(ref) iteration #3"
145.lGemsFDTD,384,282.502799,15.614005,1,S,,,,,,"lref(ref) iteration #1"
145.lGemsFDTD,384,281.997423,15.641987,0,S,,,,,,"lref(ref) iteration #2"
145.lGemsFDTD,384,282.556857,15.611017,0,S,,,,,,"lref(ref) iteration #3"
147.l2wrf2,384,523.327861,15.676597,0,S,,,,,,"lref(ref) iteration #1"
147.l2wrf2,384,518.981211,15.807894,0,S,,,,,,"lref(ref) iteration #2"
147.l2wrf2,384,519.781853,15.783544,1,S,,,,,,"lref(ref) iteration #3"

"Selected Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,384,379.913421,10.241807,1,S,,,,,NR,"SelectedIteration (base #3)"
122.tachyon,384,271.154408,7.169347,1,S,,,,,NR,"SelectedIteration (base #2)"
125.RAxML,384,364.48562,8.008546,1,S,,,,,NR,"SelectedIteration (base #2)"
126.lammps,384,230.011177,10.690785,1,S,,,,,NR,"SelectedIteration (base #3)"
128.GAPgeofem,384,318.21892,18.64754,1,S,,,,,NR,"SelectedIteration (base #2)"
129.tera_tf,384,149.363562,7.357886,1,S,,,,,NR,"SelectedIteration (base #1)"
132.zeusmp2,384,153.075179,13.849404,1,S,,,,,NR,"SelectedIteration (base #1)"
137.lu,384,171.549156,24.494437,1,S,,,,,NR,"SelectedIteration (base #3)"
142.dmilc,384,143.134115,25.738099,1,S,,,,,NR,"SelectedIteration (base #2)"
143.dleslie,384,181.905247,17.041839,1,S,,,,,NR,"SelectedIteration (base #3)"
145.lGemsFDTD,384,282.502799,15.614005,1,S,,,,,NR,"SelectedIteration (base #1)"
147.l2wrf2,384,519.781853,15.783544,1,S,,,,,NR,"SelectedIteration (base #3)"

SPECmpiL_base2007,13.335481,,13.335481
SPECmpiL_peak2007,"Not Run",,,,,,,"Not Run"

"Run number:",251

"System Vendor:",SGI
"System Name:","SGI Altix ICE 8400EX (Intel Xeon X5690, 3.46 GHz)"
"Date tested:",Jun-2011
"MPI2007 License:",4
"Test sponsor:",SGI
"Tested by:",SGI
"Hardware avail:",Feb-2011
"Software avail:",Aug-2011


"Node Description: SGI Altix ICE 8400EX Compute Node"

HARDWARE

"Number of nodes",32
"Uses of the node",compute
Vendor,SGI
Model,"SGI Altix ICE 8400EX (Intel Xeon X5690, 3.46 GHz)"
"CPU Name","Intel Xeon X5690"
"CPU(s) orderable","1-2 chips"
"Chips enabled",2
"Cores enabled",12
"Cores per chip",6
"Threads per core",2
"CPU Characteristics","Six Core, 3.46 GHz, 6.4 GT/s QPI"
,"Intel Turbo Boost Technology up to 3.73 GHz"
,"Hyper-Threading Technology enabled"
"CPU MHz",3467
"Primary Cache","32 KB I + 32 KB D on chip per core"
"Secondary Cache","256 KB I+D on chip per core"
"L3 Cache","12 MB I+D on chip per chip"
"Other Cache",None
Memory,"24 GB (6 x 4 GB 2Rx4 PC3-10600R-9, ECC)"
"Disk Subsystem",None
"Other Hardware",None
Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Number of Adapters",2
"Slot Type","PCIe x8 Gen2"
"Data Rate","InfiniBand 4x QDR"
"Ports Used",1
"Interconnect Type",InfiniBand

SOFTWARE

Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Adapter Driver",OFED-1.4.2
"Adapter Firmware",2.7.8200
"Operating System","SUSE Linux Enterprise Server 11 SP1,"
,"Kernel 2.6.32.13-0.4-default"
"Local File System",NFSv3
"Shared File System","NFSv3 IPoIB"
"System State","Multi-user, run level 3"
"Other Software","SGI ProPack 7SP1 for Linux,"
,"Build 701r3.sles11-1005252113"
,"SGI Tempo Compute Node 2.1,"
,"Build 701r3.sles11-1005252113"


"Node Description: SGI InfiniteStorage Nexis 2000 NAS"

HARDWARE

"Number of nodes",1
"Uses of the node",fileserver
Vendor,SGI
Model,"SGI Altix XE 270 (Intel Xeon X5670, 2.93 GHz)"
"CPU Name","Intel Xeon X5670"
"CPU(s) orderable","1-2 chips"
"Chips enabled",2
"Cores enabled",12
"Cores per chip",6
"Threads per core",2
"CPU Characteristics","Intel Turbo Boost Technology up to 3.33 GHz"
,"Hyper-Threading Technology enabled"
"CPU MHz",2933
"Primary Cache","32 KB I + 32 KB D on chip per core"
"Secondary Cache","256 KB I+D on chip per chip"
"L3 Cache","12 MB I+D on chip per chip"
"Other Cache",None
Memory,"96 GB (12*8 GB DDR3-1333 CL9 DIMMs)"
"Disk Subsystem","8.8 TB RAID 5"
,"60 x 146 GB SAS (Seagate Cheetah 15K.5)"
"Other Hardware",None
Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Number of Adapters",2
"Slot Type","PCIe x8 Gen2"
"Data Rate","InfiniBand 4x QDR"
"Ports Used",2
"Interconnect Type",InfiniBand

SOFTWARE

Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Adapter Driver",OFED-1.4.0
"Adapter Firmware",2.7.0
"Operating System","SUSE Linux Enterprise Server 11 (x86_64)"
,"Kernel 2.6.27.19-5-default"
"Local File System",xfs
"Shared File System",--
"System State","Multi-user, run level 3"
"Other Software","SGI Foundation Software 2, Build"
,700r3.sles11-1004061553


"Interconnect Description: InfiniBand (MPI and I/O)"

HARDWARE

Vendor,"Mellanox Technologies and SGI"
Model,None
"Switch Model","SGI QDR_1.5_HYPR_2454 with Mellanox Device 48438"
,"(Infiniscale IV)"
"Number of Switches",8
"Number of Ports",36
"Data Rate","InfiniBand 4x QDR"
Firmware,5040005
Topology,"Enhanced Hypercube"
"Primary Use","MPI and I/O traffic"


"BENCHMARK DETAILS"

"Type of System",Homogeneous
"Total Compute Nodes",32
"Total Chips",64
"Total Cores",384
"Total Threads",768
"Total Memory","768 GB"
"Base Ranks Run",384
"Minimum Peak Ranks",--
"Maximum Peak Ranks",--
"C Compiler","Intel C++ Composer XE 2011 for Linux,"
,"Version 12.0.3.174 Build 20110309"
"C++ Compiler","Intel C++ Composer XE 2011 for Linux,"
,"Version 12.0.3.174 Build 20110309"
"Fortran Compiler","Intel Fortran Composer XE 2011 for Linux,"
,"Version 12.0.3.174 Build 20110309"
"Base Pointers",64-bit
"Peak Pointers",64-bit
"MPI Library","SGI MPT 2.04 Patch 10789"
"Other MPI Info","OFED 1.4.2"
Pre-processors,None
"Other Software",None

"Submit Notes"

"The config file option 'submit' was used."

"General Notes"

" Software environment:"
"   export MPI_REQUEST_MAX=65536"
"   export MPI_TYPE_MAX=32768"
"   export MPI_BUFS_THRESHOLD=1"
"   export MPI_IB_RAILS=2"
"   ulimit -s unlimited"

" BIOS settings:"
"   AMI BIOS version 080016"
"   Hyper-Threading Technology enabled (default)"
"   Intel Turbo Boost Technology enabled (default)"
"   Intel Turbo Boost Technology activated in the OS via"
"     /etc/init.d/acpid start"
"     /etc/init.d/powersaved start"
"     powersave -f"

" Job Placement:"
"   Each MPI job was assigned to a topologically compact set"
"   of nodes, i.e. the minimal needed number of switches was"
"   used for each job: 2 switches for 96 ranks,"
"   4 switches for 192 ranks, 8 switches for 384 ranks,"
"   16 switches for 768 ranks, 32 switches for 1536 ranks."

" Additional notes regarding interconnect:"
"   The Infiniband network consists of two independent planes,"
"   with half the switches in the system allocated to each plane."
"   I/O traffic is restricted to one plane, while MPI traffic can"
"   use both planes."

"Base Compiler Invocation"
121.pop2," icc"," ifort"," ifort"
122.tachyon," icc"," icc"
125.RAxML," icc"," icc"
126.lammps," icpc"," icpc"
128.GAPgeofem," icc"," ifort"," icc"," ifort"
129.tera_tf," ifort"," ifort"
132.zeusmp2," icc"," ifort"," ifort"
137.lu," ifort"," ifort"
142.dmilc," icc"," icc"
143.dleslie," ifort"," ifort"
145.lGemsFDTD," ifort"," ifort"
147.l2wrf2," icc"," ifort"," ifort"

"Base Portability Flags"
121.pop2," -DSPEC_MPI_CASE_FLAG"
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Optimization Flags"
121.pop2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"
122.tachyon," -O3"," -xSSE4.2"," -no-prec-div"
125.RAxML," -O3"," -xSSE4.2"," -no-prec-div"
126.lammps," -O3"," -xSSE4.2"," -no-prec-div"," -ansi-alias"
128.GAPgeofem," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"
129.tera_tf," -O3"," -xSSE4.2"," -no-prec-div"
132.zeusmp2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"
137.lu," -O3"," -xSSE4.2"," -no-prec-div"
142.dmilc," -O3"," -xSSE4.2"," -no-prec-div"
143.dleslie," -O3"," -xSSE4.2"," -no-prec-div"
145.lGemsFDTD," -O3"," -xSSE4.2"," -no-prec-div"
147.l2wrf2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"

"Base Other Flags"
121.pop2," -lmpi"
122.tachyon," -lmpi"
125.RAxML," -lmpi"
126.lammps," -lmpi"
128.GAPgeofem," -lmpi"
129.tera_tf," -lmpi"
132.zeusmp2," -lmpi"
137.lu," -lmpi"
142.dmilc," -lmpi"
143.dleslie," -lmpi"
145.lGemsFDTD," -lmpi"
147.l2wrf2," -lmpi"

"Base Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Compiler Invocation"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Portability Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Optimization Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Other Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2
----------------
"For questions about","this result, please","contact the tester.",
"For other inquiries,","please contact",webmaster@spec.org.,
"Copyright 2006-2010 Standard","Performance Evaluation",Corporation,
"Tested with SPEC MPI2007 ","v2.0.  Report","generated on ","Fri Jul 15 14:08:38 2011","by SPEC MPI2007 CSV","formatter v1412."