valid,1

"Full Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,768,5483.01259,0.709646,0,S,,,,,,"lref(ref) iteration #1"
121.pop2,768,190.776959,20.395545,0,S,,,,,,"lref(ref) iteration #2"
121.pop2,768,191.400922,20.329056,1,S,,,,,,"lref(ref) iteration #3"
122.tachyon,768,159.195636,12.21139,0,S,,,,,,"lref(ref) iteration #1"
122.tachyon,768,145.867265,13.327185,0,S,,,,,,"lref(ref) iteration #2"
122.tachyon,768,146.163034,13.300217,1,S,,,,,,"lref(ref) iteration #3"
125.RAxML,768,199.332601,14.643867,1,S,,,,,,"lref(ref) iteration #1"
125.RAxML,768,199.580071,14.625709,0,S,,,,,,"lref(ref) iteration #2"
125.RAxML,768,199.242743,14.650471,0,S,,,,,,"lref(ref) iteration #3"
126.lammps,768,117.348994,20.95459,0,S,,,,,,"lref(ref) iteration #1"
126.lammps,768,117.121985,20.995204,0,S,,,,,,"lref(ref) iteration #2"
126.lammps,768,117.151949,20.989834,1,S,,,,,,"lref(ref) iteration #3"
128.GAPgeofem,768,146.538935,40.494357,1,S,,,,,,"lref(ref) iteration #1"
128.GAPgeofem,768,146.288231,40.563755,0,S,,,,,,"lref(ref) iteration #2"
128.GAPgeofem,768,147.072867,40.347347,0,S,,,,,,"lref(ref) iteration #3"
129.tera_tf,768,87.277818,12.591974,0,S,,,,,,"lref(ref) iteration #1"
129.tera_tf,768,87.201661,12.602971,1,S,,,,,,"lref(ref) iteration #2"
129.tera_tf,768,87.174847,12.606847,0,S,,,,,,"lref(ref) iteration #3"
132.zeusmp2,768,85.367792,24.833722,0,S,,,,,,"lref(ref) iteration #1"
132.zeusmp2,768,85.144426,24.89887,0,S,,,,,,"lref(ref) iteration #2"
132.zeusmp2,768,85.204903,24.881197,1,S,,,,,,"lref(ref) iteration #3"
137.lu,768,88.123198,47.683245,0,S,,,,,,"lref(ref) iteration #1"
137.lu,768,88.122479,47.683634,1,S,,,,,,"lref(ref) iteration #2"
137.lu,768,88.069973,47.712062,0,S,,,,,,"lref(ref) iteration #3"
142.dmilc,768,75.39871,48.860252,0,S,,,,,,"lref(ref) iteration #1"
142.dmilc,768,75.444368,48.830683,0,S,,,,,,"lref(ref) iteration #2"
142.dmilc,768,75.423171,48.844406,1,S,,,,,,"lref(ref) iteration #3"
143.dleslie,768,100.676432,30.791715,1,S,,,,,,"lref(ref) iteration #1"
143.dleslie,768,101.319426,30.596304,0,S,,,,,,"lref(ref) iteration #2"
143.dleslie,768,100.052778,30.983647,0,S,,,,,,"lref(ref) iteration #3"
145.lGemsFDTD,768,160.160634,27.5411,0,S,,,,,,"lref(ref) iteration #1"
145.lGemsFDTD,768,160.077154,27.555462,1,S,,,,,,"lref(ref) iteration #2"
145.lGemsFDTD,768,159.94279,27.578611,0,S,,,,,,"lref(ref) iteration #3"
147.l2wrf2,768,275.941302,29.730961,0,S,,,,,,"lref(ref) iteration #1"
147.l2wrf2,768,278.527271,29.454925,0,S,,,,,,"lref(ref) iteration #2"
147.l2wrf2,768,276.005978,29.723994,1,S,,,,,,"lref(ref) iteration #3"

"Selected Results Table"

Benchmark,"Base # Ranks","Base Run Time","Base Ratio","Base Selected","Base Status","Peak # Ranks","Peak Run Time","Peak Ratio","Peak Selected","Peak Status",Description
121.pop2,768,191.400922,20.329056,1,S,,,,,NR,"SelectedIteration (base #3)"
122.tachyon,768,146.163034,13.300217,1,S,,,,,NR,"SelectedIteration (base #3)"
125.RAxML,768,199.332601,14.643867,1,S,,,,,NR,"SelectedIteration (base #1)"
126.lammps,768,117.151949,20.989834,1,S,,,,,NR,"SelectedIteration (base #3)"
128.GAPgeofem,768,146.538935,40.494357,1,S,,,,,NR,"SelectedIteration (base #1)"
129.tera_tf,768,87.201661,12.602971,1,S,,,,,NR,"SelectedIteration (base #2)"
132.zeusmp2,768,85.204903,24.881197,1,S,,,,,NR,"SelectedIteration (base #3)"
137.lu,768,88.122479,47.683634,1,S,,,,,NR,"SelectedIteration (base #2)"
142.dmilc,768,75.423171,48.844406,1,S,,,,,NR,"SelectedIteration (base #3)"
143.dleslie,768,100.676432,30.791715,1,S,,,,,NR,"SelectedIteration (base #1)"
145.lGemsFDTD,768,160.077154,27.555462,1,S,,,,,NR,"SelectedIteration (base #2)"
147.l2wrf2,768,276.005978,29.723994,1,S,,,,,NR,"SelectedIteration (base #3)"

SPECmpiL_base2007,25.081838,,25.081838
SPECmpiL_peak2007,"Not Run",,,,,,,"Not Run"

"Run number:",252

"System Vendor:",SGI
"System Name:","SGI Altix ICE 8400EX (Intel Xeon X5690, 3.46 GHz)"
"Date tested:",Jun-2011
"MPI2007 License:",4
"Test sponsor:",SGI
"Tested by:",SGI
"Hardware avail:",Feb-2011
"Software avail:",Aug-2011


"Node Description: SGI Altix ICE 8400EX Compute Node"

HARDWARE

"Number of nodes",64
"Uses of the node",compute
Vendor,SGI
Model,"SGI Altix ICE 8400EX (Intel Xeon X5690, 3.46 GHz)"
"CPU Name","Intel Xeon X5690"
"CPU(s) orderable","1-2 chips"
"Chips enabled",2
"Cores enabled",12
"Cores per chip",6
"Threads per core",2
"CPU Characteristics","Six Core, 3.46 GHz, 6.4 GT/s QPI"
,"Intel Turbo Boost Technology up to 3.73 GHz"
,"Hyper-Threading Technology enabled"
"CPU MHz",3467
"Primary Cache","32 KB I + 32 KB D on chip per core"
"Secondary Cache","256 KB I+D on chip per core"
"L3 Cache","12 MB I+D on chip per chip"
"Other Cache",None
Memory,"24 GB (6 x 4 GB 2Rx4 PC3-10600R-9, ECC)"
"Disk Subsystem",None
"Other Hardware",None
Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Number of Adapters",2
"Slot Type","PCIe x8 Gen2"
"Data Rate","InfiniBand 4x QDR"
"Ports Used",1
"Interconnect Type",InfiniBand

SOFTWARE

Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Adapter Driver",OFED-1.4.2
"Adapter Firmware",2.7.8200
"Operating System","SUSE Linux Enterprise Server 11 SP1,"
,"Kernel 2.6.32.13-0.4-default"
"Local File System",NFSv3
"Shared File System","NFSv3 IPoIB"
"System State","Multi-user, run level 3"
"Other Software","SGI ProPack 7SP1 for Linux,"
,"Build 701r3.sles11-1005252113"
,"SGI Tempo Compute Node 2.1,"
,"Build 701r3.sles11-1005252113"


"Node Description: SGI InfiniteStorage Nexis 2000 NAS"

HARDWARE

"Number of nodes",1
"Uses of the node",fileserver
Vendor,SGI
Model,"SGI Altix XE 270 (Intel Xeon X5670, 2.93 GHz)"
"CPU Name","Intel Xeon X5670"
"CPU(s) orderable","1-2 chips"
"Chips enabled",2
"Cores enabled",12
"Cores per chip",6
"Threads per core",2
"CPU Characteristics","Intel Turbo Boost Technology up to 3.33 GHz"
,"Hyper-Threading Technology enabled"
"CPU MHz",2933
"Primary Cache","32 KB I + 32 KB D on chip per core"
"Secondary Cache","256 KB I+D on chip per chip"
"L3 Cache","12 MB I+D on chip per chip"
"Other Cache",None
Memory,"96 GB (12*8 GB DDR3-1333 CL9 DIMMs)"
"Disk Subsystem","8.8 TB RAID 5"
,"60 x 146 GB SAS (Seagate Cheetah 15K.5)"
"Other Hardware",None
Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Number of Adapters",2
"Slot Type","PCIe x8 Gen2"
"Data Rate","InfiniBand 4x QDR"
"Ports Used",2
"Interconnect Type",InfiniBand

SOFTWARE

Adapter,"Mellanox MT26428 ConnectX IB QDR"
,"(PCIe x8 Gen2 5 GT/s)"
"Adapter Driver",OFED-1.4.0
"Adapter Firmware",2.7.0
"Operating System","SUSE Linux Enterprise Server 11 (x86_64)"
,"Kernel 2.6.27.19-5-default"
"Local File System",xfs
"Shared File System",--
"System State","Multi-user, run level 3"
"Other Software","SGI Foundation Software 2, Build"
,700r3.sles11-1004061553


"Interconnect Description: InfiniBand (MPI and I/O)"

HARDWARE

Vendor,"Mellanox Technologies and SGI"
Model,None
"Switch Model","SGI QDR_1.5_HYPR_2454 with Mellanox Device 48438"
,"(Infiniscale IV)"
"Number of Switches",16
"Number of Ports",36
"Data Rate","InfiniBand 4x QDR"
Firmware,5040005
Topology,"Enhanced Hypercube"
"Primary Use","MPI and I/O traffic"


"BENCHMARK DETAILS"

"Type of System",Homogeneous
"Total Compute Nodes",64
"Total Chips",128
"Total Cores",768
"Total Threads",1536
"Total Memory","1536 GB"
"Base Ranks Run",768
"Minimum Peak Ranks",--
"Maximum Peak Ranks",--
"C Compiler","Intel C++ Composer XE 2011 for Linux,"
,"Version 12.0.3.174 Build 20110309"
"C++ Compiler","Intel C++ Composer XE 2011 for Linux,"
,"Version 12.0.3.174 Build 20110309"
"Fortran Compiler","Intel Fortran Composer XE 2011 for Linux,"
,"Version 12.0.3.174 Build 20110309"
"Base Pointers",64-bit
"Peak Pointers",64-bit
"MPI Library","SGI MPT 2.04 Patch 10789"
"Other MPI Info","OFED 1.4.2"
Pre-processors,None
"Other Software",None

"Submit Notes"

"The config file option 'submit' was used."

"General Notes"

" Software environment:"
"   export MPI_REQUEST_MAX=65536"
"   export MPI_TYPE_MAX=32768"
"   export MPI_BUFS_THRESHOLD=1"
"   export MPI_IB_RAILS=2"
"   ulimit -s unlimited"

" BIOS settings:"
"   AMI BIOS version 080016"
"   Hyper-Threading Technology enabled (default)"
"   Intel Turbo Boost Technology enabled (default)"
"   Intel Turbo Boost Technology activated in the OS via"
"     /etc/init.d/acpid start"
"     /etc/init.d/powersaved start"
"     powersave -f"

" Job Placement:"
"   Each MPI job was assigned to a topologically compact set"
"   of nodes, i.e. the minimal needed number of switches was"
"   used for each job: 2 switches for 96 ranks,"
"   4 switches for 192 ranks, 8 switches for 384 ranks,"
"   16 switches for 768 ranks, 32 switches for 1536 ranks."

" Additional notes regarding interconnect:"
"   The Infiniband network consists of two independent planes,"
"   with half the switches in the system allocated to each plane."
"   I/O traffic is restricted to one plane, while MPI traffic can"
"   use both planes."

"Base Compiler Invocation"
121.pop2," icc"," ifort"," ifort"
122.tachyon," icc"," icc"
125.RAxML," icc"," icc"
126.lammps," icpc"," icpc"
128.GAPgeofem," icc"," ifort"," icc"," ifort"
129.tera_tf," ifort"," ifort"
132.zeusmp2," icc"," ifort"," ifort"
137.lu," ifort"," ifort"
142.dmilc," icc"," icc"
143.dleslie," ifort"," ifort"
145.lGemsFDTD," ifort"," ifort"
147.l2wrf2," icc"," ifort"," ifort"

"Base Portability Flags"
121.pop2," -DSPEC_MPI_CASE_FLAG"
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Optimization Flags"
121.pop2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"
122.tachyon," -O3"," -xSSE4.2"," -no-prec-div"
125.RAxML," -O3"," -xSSE4.2"," -no-prec-div"
126.lammps," -O3"," -xSSE4.2"," -no-prec-div"," -ansi-alias"
128.GAPgeofem," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"
129.tera_tf," -O3"," -xSSE4.2"," -no-prec-div"
132.zeusmp2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"
137.lu," -O3"," -xSSE4.2"," -no-prec-div"
142.dmilc," -O3"," -xSSE4.2"," -no-prec-div"
143.dleslie," -O3"," -xSSE4.2"," -no-prec-div"
145.lGemsFDTD," -O3"," -xSSE4.2"," -no-prec-div"
147.l2wrf2," -O3"," -xSSE4.2"," -no-prec-div"," -O3"," -xSSE4.2"," -no-prec-div"

"Base Other Flags"
121.pop2," -lmpi"
122.tachyon," -lmpi"
125.RAxML," -lmpi"
126.lammps," -lmpi"
128.GAPgeofem," -lmpi"
129.tera_tf," -lmpi"
132.zeusmp2," -lmpi"
137.lu," -lmpi"
142.dmilc," -lmpi"
143.dleslie," -lmpi"
145.lGemsFDTD," -lmpi"
147.l2wrf2," -lmpi"

"Base Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Base Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Compiler Invocation"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Portability Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Optimization Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Other Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Forbidden Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2

"Peak Unknown Flags"
121.pop2
122.tachyon
125.RAxML
126.lammps
128.GAPgeofem
129.tera_tf
132.zeusmp2
137.lu
142.dmilc
143.dleslie
145.lGemsFDTD
147.l2wrf2
----------------
"For questions about","this result, please","contact the tester.",
"For other inquiries,","please contact",webmaster@spec.org.,
"Copyright 2006-2010 Standard","Performance Evaluation",Corporation,
"Tested with SPEC MPI2007 ","v2.0.  Report","generated on ","Fri Jul 15 14:08:46 2011","by SPEC MPI2007 CSV","formatter v1412."