# Invocation command line: # /home/root/specmpi2007/bin/runspec --config=lenovoI20O402H47R81.cfg --size=lref --tune=base --reportable --rank=64 --iterations=2 large # output_root was not used for this run ############################################################################ # Invocation command line: # /home/root/specmpi2007/bin/runspec --config=lenovo_I20_O402_H47_R81.cfg --size=lref --tune=base --reportable --rank=128 --iterations=2 large # output_root was not used for this run ############################################################################ # Invocation command line: # /home/root/NFS/bin/runspec --config=AMD_1node.cfg --flagsurl=/home/root/NFS\/Lenovo_AMD_SPECmpiM_Flags_2019Jul.xml --size=mref --tune=base --reportable --rank=64 --iterations=3 medium # output_root was not used for this run ############################################################################ ##################################################################### # # Config file to run SPEC MPI2007 with Intel Software Toolchain # (Intel Compiler 17.0.2 and Intel MPI 17.1.132) # ##################################################################### env_vars=1 makeflags= -j 32 output_format= all ext=I20_O402_H47_R81 CPL=/opt/OMPI/O402_I20_H47_R81 CC=${CPL}/bin/mpicc CXX=${CPL}/bin/mpicxx FC=${CPL}/bin/mpif90 #ext=lenovoM_ICC20_OMPI402_HPCX47 ##################################################################### # Portability flags ##################################################################### 121.pop2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG 126.lammps=default=default=default: CXXPORTABILITY = -DMPICH_IGNORE_CXX_SEEK 127.wrf2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX #CPORTABILITY = -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX -Wno-return-type #-Wno-missing-declarations -Wno-missing-prototypes 129.tera_tf=default=default=default: #srcalt=add_rank_support 130.socorro=default=default=default: srcalt=nullify_ptrs #srcalt=second_underscore FPORTABILITY = -assume nostd_intent_in 143.dleslie=default=default=default: #srcalt=integer_overflow ################################################################# # Optimization flags ################################################################# default=default=default=default: #OPTIMIZE = -O3 -ipo -xCORE-AVX2 -no-prec-div OPTIMIZE = -O3 -march=core-avx2 -no-prec-div -ipo #CXXOPTIMIZE = -std=c11 #OPTIMIZE = -O3 -ipo -xCORE-AVX512 -no-prec-div -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -Wl,-z,muldefs -m64 -std=c11 #MPIRUN_OPTS=--allow-run-as-root -mca coll_hcoll_enable 1 -x HCOLL_MAIN_IB=mlx5_0:1 -mca pml ucx -x UCX_TLS=sm -x UCX_DC_MLX5_NUM_DCI=16 --map-by numa MPIRUN_OPTS=--allow-run-as-root -mca coll_hcoll_enable 1 -mca pml ucx -x UCX_TLS=sm --map-by numa #submit = mpiexec -hosts localhost -n $ranks $command # 1N #submit = /opt/OpenMPI/OMPI402_ICC20_HPCX47/bin/mpirun --allow-run-as-root --oversubscribe -x HCOLL_MAIN_IB=mlx5_0:1 -np $ranks $command #submit = ${CPL}/bin/mpirun --allow-run-as-root -mca coll_hcoll_enable 1 -x HCOLL_MAIN_IB=mlx5_0:1 -mca pml ucx -x UCX_TLS=sm -x UCX_DC_MLX5_NUM_DCI=16 --map-by numa -np $ranks $command submit = ${CPL}/bin/mpirun ${MPIRUN_OPTS} -np $ranks $command # 2Ns #submit = /opt/OpenMPI/OMPI402_ICC20_HPCX47/bin/mpirun --allow-run-as-root -host 192.168.99.161,192.168.99.185 --oversubscribe -mca coll_hcoll_enable 1 -x HCOLL_MAIN_IB=mlx5_0:1 -mca pml ucx -x UCX_TLS=sm,dc_x -x UCX_DC_MLX5_NUM_DCI=16 --map-by numa -np $ranks $command # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable sw_other = None sw_mpi_other = None sw_preprocessors = No test_sponsor = Lenovo Global Technology license_num = 28 tester = Lenovo Global Technology hw_avail = Jun-2020 sw_avail = Jun-2020 prepared_by = Lenovo Global Technology system_vendor = Lenovo Global Technology node_compute_sw_state = Multi-user, run level 3 node_compute_sw_sharedfile = None node_compute_sw_other = None node_compute_sw_localfile = xfs node_compute_purpose = compute node_compute_order = 1 node_compute_label = ThinkSystem SR655 node_compute_hw_vendor = Lenovo Global Technology node_compute_hw_scache = 512 KB I+D on chip per core node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core node_compute_hw_other = None node_compute_hw_ocache = None node_compute_hw_nthreadspercore = 1 node_compute_hw_ncpuorder = 1 chip node_compute_hw_ncoresperchip = 64 node_compute_hw_ncores = 64 node_compute_hw_nchips = 1 node_compute_hw_model = SR655 node_compute_hw_memory = 256 GB (8 x 32 GB 2Rx8 PC4-3200AA-R) node_compute_hw_disk = 1 x 480 GB SATA 2.5" SSD node_compute_hw_cpu_name = AMD EPYC 7H12 CPU node_compute_hw_cpu_mhz = 2600 node_compute_hw_cpu_char = None node_compute_hw_adapter_fs_slot_type = None node_compute_hw_adapter_fs_ports_used = 0 node_compute_hw_adapter_fs_model = None node_compute_hw_adapter_fs_interconnect = None node_compute_hw_adapter_fs_firmware = None node_compute_hw_adapter_fs_driver = None node_compute_hw_adapter_fs_data_rate = None node_compute_hw_adapter_fs_count = 0 node_compute_count = 1 flagsurl000 = http://www.spec.org/mpi2007/flags/EM64T_Intel121_flags.20200408.xml node_compute_hw_tcache000 = 256 MB I+D on chip per chip node_compute_hw_tcache001 = 16 MB shared / 4 cores node_compute_sw_os000 = Red Hat Enterprise Linux Server release 8.1 node_compute_sw_os001 = 4.18.0-147.el8.x86_64 sw_c_compiler000 = Intel C++ Compiler 20.0 for Linux sw_c_compiler001 = Version 19.1.0.166 Build 20191121 sw_cxx_compiler000 = Intel C++ Compiler 20.0 for Linux sw_cxx_compiler001 = Version 19.1.0.166 Build 20191121 sw_f_compiler000 = Intel Fortran Compiler 20.0 for Linux sw_f_compiler001 = Version 19.1.0.166 Build 20191121 sw_mpi_library000 = Open MPI Library sw_mpi_library001 = Version 4.0.2 system_class = Homogeneous system_name000 = ThinkSystem SR655 system_name001 = (AMD EPYC 7H12 CPU, 2.6 GHz) notes_000 = MPI startup command: notes_005 = mpiexec command was used to start MPI jobs. notes_010 = notes_015 = RAM configuration: notes_020 = Compute nodes have 1 x 32 GB RDIMM on each memory channel. notes_025 = notes_030 = Add "idle=poll" into grub notes_035 = notes_040 = BIOS settings: notes_045 = Operating Mode : Maximum Performance Mode notes_050 = Hyper-Threading Technology (SMT): Disabled notes_055 = NPS4 notes_060 = notes_065 = notes_070 = Yes: The test sponsor attests, as of date of publication, notes_075 = that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. notes_080 = notes_085 = Yes: The test sponsor attests, as of date of publication, notes_090 = that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. notes_095 = notes_100 = Yes: The test sponsor attests, as of date of publication, notes_105 = that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. notes_110 =