SPEC Seal of Reviewal CINT2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
SGI
SGI Origin 300 16X 500MHz R14k
SPECint_rate2000 = 68.3  
SPECint_rate_base2000 = 65.8  
SPEC license # 4 Tested by: SGI Test date: Dec-2001 Hardware Avail: Dec-2001 Software Avail: Nov-2001
Graph Scale Benchmark Base
Copies
Base
Runtime
Base
Ratio
Copies Runtime Ratio
164.gzip base result bar (50.2)
164.gzip peak result bar (52.0)
164.gzip 16 518    50.2   16 500    52.0  
175.vpr base result bar (68.7)
175.vpr peak result bar (73.5)
175.vpr 16 378    68.7   16 353    73.5  
176.gcc base result bar (65.7)
176.gcc peak result bar (66.2)
176.gcc 16 311    65.7   16 309    66.2  
181.mcf base result bar (52.1)
181.mcf peak result bar (52.1)
181.mcf 16 641    52.1   16 641    52.1  
186.crafty base result bar (74.3)
186.crafty peak result bar (75.0)
186.crafty 16 250    74.3   16 247    75.0  
197.parser base result bar (58.4)
197.parser peak result bar (60.9)
197.parser 16 573    58.4   16 549    60.9  
252.eon base result bar (81.1)
252.eon peak result bar (86.3)
252.eon 16 298    81.1   16 280    86.3  
253.perlbmk base result bar (55.3)
253.perlbmk peak result bar (55.5)
253.perlbmk 16 605    55.3   16 602    55.5  
254.gap base result bar (47.2)
254.gap peak result bar (47.6)
254.gap 16 432    47.2   16 429    47.6  
255.vortex base result bar (98.6)
255.vortex peak result bar (113)
255.vortex 16 358    98.6   16 313    113    
256.bzip2 base result bar (63.1)
256.bzip2 peak result bar (68.1)
256.bzip2 16 441    63.1   16 409    68.1  
300.twolf base result bar (97.9)
300.twolf peak result bar (97.9)
300.twolf 16 569    97.9   16 569    97.9  
  SPECint_rate_base2000 65.8    
  SPECint_rate2000 68.3  

Hardware
Hardware Vendor: SGI
Model Name: SGI Origin 300 16X 500MHz R14k
CPU: R14000
CPU MHz: 500
FPU: Integrated
CPU(s) enabled: 16 cores, 16 chips, 1 core/chip
CPU(s) orderable: 2-32
Parallel: No
Primary Cache: 32KBI + 32KBD on chip
Secondary Cache: 2MB(I+D) off chip
L3 Cache: N/A
Other Cache: N/A
Memory: 16 GB
Disk Subsystem: 1 x 18 GB SCSI, 2 x 18 GB SCSI (striped)
Other Hardware: None
Software
Operating System: IRIX 6.5.14f
Compiler: MIPSpro 7.3.1.2m C, C++
SCSL 1.4 Math Library
File System: xfs
System State: Single-user
Notes / Tuning Information
Baseline optimization flags (C and C++ use same flags):
   PASS1 : -Ofast=ip27 -IPA:use_intrinsic -fb_create /tmp/SPEC2000/FBDIR/base/$(EXEBASE)
   PASS2 : -Ofast=ip27 -IPA:use_intrinsic -fb_opt /tmp/SPEC2000/FBDIR/base/$(EXEBASE)
Portability Flags:
   176.gcc: -Dalloca=__builtin_alloca -DMIPS -DHOST_WORDS_BIG_ENDIAN
   186.crafty: -DSGI
   252.eon: -lm 
   253.perlbmk: -DSPEC_CPU2000_SGI -DI_FCNTL
   254.gap: -DSYS_IS_USG -DSYS_HAS_TIME_PROTO -DSYS_HAS_SIGNAL_PROTO -DSYS_HAS_IOCTL_PROTO
            -DSYS_HAS_ANSI -DSYS_HAS_CALLOC_PROTO
   300.twolf: -DHAVE_SIGNED_CHAR
Peak optimization flags:
note:  all occurances of (FEEDBACK) below means compiled with a two-step process:
   PASS1 = -fb_create /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
   PASS2 = -fb_opt /tmp/SPEC2000/FBDIR_peak/$(EXEBASE)
 164.gzip: -Ofast=ip27 -IPA:space=500:plimit=500 -lmalloc (FEEDBACK)
 175.vpr: -Ofast=ip27 -IPA:space=300:plimit=10000:callee_limit=5000:linear=on 
 .        -LNO:prefetch_ahead=2 -INLINE:aggressive=on 
 .        -OPT:Olimit=0:alias=disjoint:alias=restrict -CG:ld_latency=10 -lmalloc (FEEDBACK)
 181.mcf: basepeak=yes
 176.gcc: -Ofast=ip27 -CG:ld_latency=4 (FEEDBACK)
 186.crafty: -Ofast=ip27 -LNO:prefetch=0 -OPT:goto=off -CG:ld_latency=4 -lmalloc (FEEDBACK)
 197.parser: -Ofast=ip27 -IPA:min_hot=14 (FEEDBACK)
 252.eon: -Ofast=ip27 -LNO:prefetch=0 -LANG:exceptions=off -CG:ld_latency=4 -lmalloc -lm 
 .        (FEEDBACK)
 253.perlbmk: -Ofast=ip27 -IPA:use_intrinsic -Wl,-x (FEEDBACK)
 254.gap: -Ofast=ip27 -IPA:use_intrinsic -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4
 . -OPT:alias=restrict:alias=disjoint -IPA:min_hot=7 -CG:ld_latency=8 -lmalloc (FEEDBACK)
 255.vortex: -Ofast=ip27 -IPA:use_intrinsic 
 .           -OPT:unroll_analysis=off:unroll_size=0:unroll_times_max=4 -LNO:opt=0 -CG:ld_latency=5 
 .           -IPA:min_hot=14 -TENV:X=4 -IPA:space=500:plimit=3600 -OPT:goto=off (FEEDBACK)
 256.bzip2: -Ofast=ip27 -IPA:min_hot=5:space=500:plimit=2900 -INLINE:aggressive=on (FEEDBACK)
 300.twolf: basepeak=yes
The following O/S parameters were set:
   setenv PAGESIZE_DATA 4096 ; setenv PAGESIZE_TEXT 4096 ; setenv PAGESIZE_STACK 4096
   systune -i ; percent_totalmem_4m_pages = 40 ; percent_totalmem_1m_pages = 7
   systune -i ; percent_totalmem_256k_pages = 7 ; percent_totalmem_64k_pages = 7
   systune -i ; r12k_bdiag = 0x4000000 ;
   limit stacksize 500000
The following is done before building each benchmark that requires (FEEDBACK):
 rm -rf /tmp/SPEC2000 ; mkdir /tmp/SPEC2000 ; cd /tmp/SPEC2000 ; mkdir FBDIR_base ; mkdir FBDIR_peak
 The first disk mentioned in the Disk Subsystem is the system disk. A striped
 XFS filesystem was created using the rest of the disks and the benchmark was
 run on this.
Jobs are submitted using dplace. Contents of the placement file submit.pf:   
memories 1 in topology physical near $NODE
threads 1
run thread 0 on memory 0 using cpu $CPU


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 02-Jan-2002

Generated on Fri Mar 25 16:02:04 2005 by SPEC CPU2000 HTML formatter v1.01