# Invocation command line: # /usr/spec2000/bin/runspec -a validate -T all -v 6 -n 3 -s -r -u 2 -c /tmp/specdriver-8342.tmp7 fp int ############################################################################ ################################################################################ # SPEC CPU2000 Benchmark Config file IBM RS/6000 AIX # Last Changed: 10.25.01 ################################################################################ #=============================================================================== # Global Options apply to all runs #=============================================================================== VENDOR = ibm action = validate tune = all output_format = all runout = yes teeout = yes ext = colt.f711.cpp5020 basepeak=0 #--number of times each test will be run (reportable must be and odd num >= 3) iterations = 3 Mean_anyway = 0 ignore_errors = 0 #--turn on both of the following for reportable (non-test) runs reportable = 1 check_md5 = 1 #--prevent log file lines that are too long for vi log_line_width = 156 #--the directory where pdf data will go, be sure to tell the compiler #---where this is (eg: export PDFDIR="/tmp/pdfdir" for IBM compilers) PDFDIR=/tmp/pdfdir #=============================================================================== #=============================================================================== company_name = IBM Corporation machine_name = hw_vendor = IBM Corporation hw_model = IBM eServer pSeries 610 Mod 6E1 450 hw_cpu = POWER3-II hw_cpu_mhz = 450 hw_fpu = Integrated hw_ncpu = 1 hw_ncpuorder = 1,2 hw_pcache = 32KBI+64KBD (on chip) hw_scache = 4MB unified (off chip) hw_tcache = None hw_ocache = None hw_parallel = No hw_memory = 2GB hw_disk = 2x18GB 10000RPM hw_other = None hw_avail = Oct-2001 sw_os = AIX 5L V5.1 sw_file = AIX/JFS sw_state = Multi-user sw_avail = Dec-2001 license_num = 11 tester_name = IBM Corp. test_date = Jan-2002 #--------------------------------- # Floating point specific notes #--------------------------------- fp=default=default=default: sw_compiler01 = Fortran 77 and 90: IBM xl Fortran 7.1.1 (prerelease) invoked sw_compiler02 = as "xlf90"for Fortran 90 and as xlf for Fortran 77 sw_compiler03 = C: IBM VAC++ 5.0.2.0 invoked as "xlc" notes001 = Portability Flags notes002 = -qfixed used in: wupwise, swim, mgrid, applu, galgel, sixtrack, apsi notes003 = -qsuffix=f=f90 used in: galgel, facerec, lucas, fma3d notes004 = Base Optimization Flags: notes005 = Fortran: -O5 -lmass notes006 = C: -O5 -lmass notes007 = Peak Optimization Flags notes008 = 168.wupwise: (basepeak=1) notes009 = 171.swim: (basepeak=1) notes010 = 172.mgrid: (basepeak=1) notes011 = 173.applu: -O5 -lmass -qipa=partition=large notes012 = 177.mesa: -O5 -lmass -qipa=partition=large, fdpr -v -R3 notes013 = 178.galgel: (basepeak=1) notes014 = 179.art: (basepeak=1) notes015 = 183.equake: -O5 -lmass -lhmu -qinline notes016 = 187.facerec: (basepeak=1) notes018 = 188.ammp: -O3 -qarch=pwr3 notes019 = 189.lucas: -qpdf1/pdf2 -O3 -lhmu -lmass notes020 = -qipa=partition=large, fdpr -v -R3 notes021 = 191.fma3d: -O4 -lmass -qipa=partition=large notes022 = 200.sixtrack: (basepeak=1) notes023 = 301.apsi: (basepeak=1) notes024 = fpdr: Feedback directed program restructuring tool notes029 = /usr/spec2000 filesystem mounted with no JFS log file I/O notes030 = APAR IY 21957 was applied to AIX 5.1.0 to enable new hardware support #--------------------------------- # Integer specific notes #--------------------------------- int=default=default=default: sw_compiler01 = C: IBM VAC++ 5.0.2.0 invoked as "cc" except where noted sw_compiler02 = as "xlc" sw_compiler03 = C++: IBM VAC++ 5.0.2.0 invoked as "xlC" notes001 = Portability Flags: notes002 = gcc: -ma -qlanglvl=ansi -DHOST_WORDS_BIG_ENDIAN notes003 = crafty: -DAIX notes004 = eon: -DNEED_EXPLICIT_SPECIALIZATION notes005 = perlbmk: -DSPEC_CPU2000_AIX notes006 = gap: -DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO notes007 = -DSYS_HAS_MALLOC_PROTO -DSYS_HAS_CALLOC_PROTO notes008 = twolf: -DHAVE_SIGNED_CHAR notes009 = Base Optimization Flags: notes010 = C: -O4 -lmass notes011 = C++: -O4 -lmass notes012 = Peak Optimization Flags notes013 = 164.gzip: -O4 -lhmu, fdpr -R3 -p -x -o notes014 = 175.vpr: -O5 -qunroll=8 notes015 = 176.gcc: (basepeak=1) notes016 = 181.mcf: (basepeak=1) notes017 = 186.crafty: -O3 -lhmu -q64 notes018 = 197.parser: -qpdf1/pdf2 -O4 -lpdf notes019 = -bnso -bI:/lib/syscalls.exp, fdpr -R3 -p -x notes020 = 252.eon: -O4 -lmass, fdpr -R3 -p -x -o notes021 = 253.perlbmk: -qpdf1/pdf2 -O3 -lhmu -lpdf -qarch=pwr3 notes022 = -qdatalocal -qunroll=8, fdpr -R3 -p -x notes023 = 254.gap: -O4 -qarch=pwr3, fdpr -R3 -p -x -o notes024 = 255.vortex: -O3 -lhmu -lmass -qipa=partition=large, notes025 = fdpr -v -R3 -p -x notes026 = 256.bzip2: -O5 -qunroll=8, fdpr -R3 -p -x -o notes027 = 300.twolf: -qpdf1/pdf2 -O5 -lpdf, fdpr -R3 -p -x notes028 = CC=/usr/vac/bin/xlc notes029 = fpdr: Feedback directed program restructuring tool notes030 = APAR IY 21957 was applied to AIX 5.1.0 to enable new hardware support ################################################################################ ################################################################################ ###### ###### ###### DO NOT EDIT BELOW THIS BLOCK ###### ###### (unless you are prepared to build new binaries) ###### ###### ###### ################################################################################ ################################################################################ #=============================================================================== # How the compilers are called # The settings used here are for IBM C/C++ and xl Fortran compilers #=============================================================================== fp=default=default=default: CC = /usr/vacpp/bin/xlc FC = xlf90 F77 = xlf int=default=default=default: CC = /usr/vacpp/bin/cc CXX = /usr/vacpp/bin/xlC #=============================================================================== # Base Level Optimizations # Limited to 4 flags #=============================================================================== #------------------------ # Floating Point #------------------------ fp=base=default=default: FOPTIMIZE =-O5 -lmass COPTIMIZE =-O5 -lmass #------------------------ # Integer #------------------------ int=base=default=default: COPTIMIZE=-O4 -lmass CXXOPTIMIZE=-O4 -lmass ############################################################################## ############################################################################## #=============================================================================== # Floating Point Portability Flags # no optimizations allowed here #=============================================================================== 168.wupwise=default=default=default: EXTRA_FFLAGS=-qfixed 171.swim=default=default=default: EXTRA_FFLAGS=-qfixed 172.mgrid=default=default=default: EXTRA_FFLAGS=-qfixed 173.applu=default=default=default: EXTRA_FFLAGS=-qfixed 178.galgel=default=default=default: EXTRA_FFLAGS=-qfixed -qsuffix=f=f90 187.facerec=default=default=default: EXTRA_FFLAGS=-qsuffix=f=f90 189.lucas=default=default=default: EXTRA_FFLAGS=-qsuffix=f=f90 191.fma3d=default=default=default: EXTRA_FFLAGS= -qsuffix=f=f90 200.sixtrack=default=default=default: EXTRA_FFLAGS=-qfixed 301.apsi=default=default=default: EXTRA_FFLAGS=-qfixed #=============================================================================== # Integer Portability Flags # no optimizations allowed here #=============================================================================== 176.gcc=default=default=default: EXTRA_CFLAGS=-ma -qlanglvl=ansi -DHOST_WORDS_BIG_ENDIAN 186.crafty=default=default=default: EXTRA_CFLAGS=-DAIX 252.eon=default=default=default: EXTRA_CXXFLAGS=-DNEED_EXPLICIT_SPECIALIZATION 253.perlbmk=default=default=default: EXTRA_CFLAGS=-DSPEC_CPU2000_AIX 254.gap=default=default=default: EXTRA_CFLAGS=-DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO -DSYS_HAS_MALLOC_PROTO -DSYS_HAS_CALLOC_PROTO 300.twolf=default=default=default: EXTRA_CFLAGS=-DHAVE_SIGNED_CHAR #=============================================================================== # Integer peak optimization flags #=============================================================================== 164.gzip=peak=default=default: COPTIMIZE=-O4 -lhmu fdo_run1 = fdpr -R3 -p $commandexe -x $command -o $baseexe 175.vpr=peak=default=default: COPTIMIZE=-O5 -qunroll=8 176.gcc=peak=default=default: basepeak = 1 181.mcf=peak=default=default: basepeak = 1 186.crafty=peak=default=default: COPTIMIZE=-O3 -lhmu -q64 197.parser=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CFLAGS=-qpdf1 -O4 PASS1_LDFLAGS=-O4 -lpdf -L/usr/vac/lib -bnso -bI:/lib/syscalls.exp PASS2_CFLAGS=-qpdf2 -O4 PASS2_LDFLAGS=-O4 -bnso -bI:/lib/syscalls.exp fdo_run2 = fdpr -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 252.eon=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} CXXOPTIMIZE=-O4 -lmass fdo_run1 = fdpr -R3 -p $commandexe -x $command -o $baseexe 253.perlbmk=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_CFLAGS =-qpdf1 -O3 -qarch=pwr3 -qdatalocal -qunroll=8 PASS1_LDCFLAGS =-lhmu -lpdf -L/usr/vac/lib PASS2_CFLAGS =-qpdf2 -O3 -qarch=pwr3 -qdatalocal -qunroll=8 PASS2_LDCFLAGS =-lhmu fdo_run2 = fdpr -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 254.gap=peak=default=default: COPTIMIZE=-O4 -qarch=pwr3 fdo_run1 = fdpr -R3 -p $commandexe -x $command -o $baseexe 255.vortex=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} COPTIMIZE=-O3 -lhmu -lmass -qipa=partition=large fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 256.bzip2=peak=default=default: COPTIMIZE=-O5 -qunroll=8 fdo_run1 = fdpr -R3 -p $commandexe -x $command -o $baseexe 300.twolf=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} CC=/usr/vac/bin/xlc PASS1_FLAGS=-qpdf1 -O5 PASS1_LDFLAGS=-O5 -lpdf -L/usr/vac/lib PASS2_FLAGS=-qpdf2 -O5 PASS2_LDFLAGS=-O5 fdo_run2 = fdpr -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe #=============================================================================== # Floating Point peak optimization flags #=============================================================================== default=peak=default=default: EXTRA_F77FLAGS =-qfixed 168.wupwise=peak=default=default: basepeak = 1 171.swim=peak=default=default: basepeak = 1 172.mgrid=peak=default=default: basepeak = 1 173.applu=peak=default=default: F77OPTIMIZE =-O5 -lmass -qipa=partition=large 177.mesa=peak=default=default: COPTIMIZE = -O5 -lmass -qipa=partition=large fdo_run1 = fdpr -v -R3 -p $commandexe -x $command fdo_post1 = cp ${baseexe}.fdpr $baseexe 178.galgel=peak=default=default: basepeak = 1 179.art=peak=default=default: basepeak = 1 183.equake=peak=default=default: CC=/usr/vac/bin/xlc COPTIMIZE = -O5 -lmass -lhmu -qinline 187.facerec=peak=default=default: basepeak = 1 # return to spec below if you change the base flags... 188.ammp=peak=default=default: COPTIMIZE =-O3 -qarch=pwr3 189.lucas=peak=default=default: fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR} PASS1_FFLAGS =-qpdf1 -O3 -lhmu -lmass -qipa=partition=large PASS1_LDFFLAGS =-lhmu -lmass -lpdf -L/usr/lpp/xlf/lib/pdf -qipa=partition=large PASS2_FFLAGS =-qpdf2 -O3 -lhmu -lmass -qipa=partition=large PASS2_LDFFLAGS =-lhmu -lmass -qipa=partition=large fdo_run2 = fdpr -v -R3 -p $commandexe -x $command fdo_post2 = cp ${baseexe}.fdpr $baseexe 191.fma3d=peak=default=default: FOPTIMIZE =-O4 -lmass -qipa=partition=large 200.sixtrack=peak=default=default: basepeak = 1 301.apsi=peak=default=default: basepeak = 1