SPEC Seal of Reviewal CFP2000 Result
Copyright © 1999-2004 Standard Performance Evaluation Corporation
Hewlett-Packard Company
AlphaServer GS1280 7/1150
SPECfp_rate2000 = 17.2  
SPECfp_rate_base2000 = 13.0  
SPEC license # 2 Tested by: HP Test date: Dec-2002 Hardware Avail: Jan-2003 Software Avail: Jan-2003
Graph Scale Benchmark Base
Copies
Base
Runtime
Base
Ratio
Copies Runtime Ratio
168.wupwise base result bar (10.2)
168.wupwise peak result bar (24.6)
168.wupwise 1 181    10.2   1 75.3  24.6  
171.swim base result bar (41.6)
171.swim peak result bar (41.6)
171.swim 1 86.4  41.6   1 86.4  41.6  
172.mgrid base result bar (8.21)
172.mgrid peak result bar (12.5)
172.mgrid 1 254    8.21  1 167    12.5  
173.applu base result bar (17.6)
173.applu peak result bar (17.9)
173.applu 1 138    17.6   1 136    17.9  
177.mesa base result bar (10.8)
177.mesa peak result bar (12.9)
177.mesa 1 151    10.8   1 126    12.9  
178.galgel base result bar (24.4)
178.galgel peak result bar (24.7)
178.galgel 1 138    24.4   1 136    24.7  
179.art base result bar (23.4)
179.art peak result bar (37.5)
179.art 1 129    23.4   1 80.3  37.5  
183.equake base result bar (6.02)
183.equake peak result bar (18.3)
183.equake 1 250    6.02  1 82.2  18.3  
187.facerec base result bar (12.8)
187.facerec peak result bar (14.3)
187.facerec 1 172    12.8   1 154    14.3  
188.ammp base result bar (8.53)
188.ammp peak result bar (9.82)
188.ammp 1 299    8.53  1 260    9.82 
189.lucas base result bar (17.7)
189.lucas peak result bar (19.3)
189.lucas 1 131    17.7   1 120    19.3  
191.fma3d base result bar (11.8)
191.fma3d peak result bar (15.8)
191.fma3d 1 206    11.8   1 154    15.8  
200.sixtrack base result bar (5.44)
200.sixtrack peak result bar (5.92)
200.sixtrack 1 234    5.44  1 216    5.92 
301.apsi base result bar (14.4)
301.apsi peak result bar (15.4)
301.apsi 1 209    14.4   1 195    15.4  
  SPECfp_rate_base2000 13.0    
  SPECfp_rate2000 17.2  

Hardware
Hardware Vendor: Hewlett-Packard Company
Model Name: AlphaServer GS1280 7/1150
CPU: Alpha 21364
CPU MHz: 1150
FPU: Integrated
CPU(s) enabled: 1 core, 1 chip, 1 core/chip
CPU(s) orderable: 2 to 16
Parallel: No
Primary Cache: 64KB(I)+64KB(D) on chip
Secondary Cache: 1.75MB on chip per CPU
L3 Cache: None
Other Cache: None
Memory: 4GB
Disk Subsystem: 36GB SCSI
Other Hardware: None
Software
Operating System: Tru64 UNIX V5.1B (Rev. 2650)
+IPK
Compiler: Compaq C V6.5-011-48C5K
Spike V5.2 (506A)
Compaq Fortran V5.5-2602-48C8L
Compaq Fortran 77 V5.5-2602-48C8L
KAP Fortran V4.3 k3105171 000607
KAP Fortran 77 V4.1 k310440 980926
KAP C V4.1 k010726 000607
File System: ufs
System State: Multi-user
Notes / Tuning Information
 Baseline   C: cc  -arch ev7 -fast -O4 ONESTEP 
      Fortran: f90 -arch ev7 -fast -O5 ONESTEP 

  Peak:
   All use: -arch ev7 -non_shared ONESTEP
   except these (which use only the tunings shown below):
        173.applu 188.ammp 191.fma3d
   
   Individual benchmark tuning:
   168.wupwise: kf77 -call_shared -inline all -tune ev67 
                -unroll 12 -automatic -align commons -arch ev67
                -fkapargs=' -aggressive=c -fuse
                -fuselevel=1 -so=2 -r=1 -o=1 -interleave
                -ur=6 -ur2=060 ' +PFB
       171.swim: same as base
      172.mgrid: kf90 -call_shared -arch generic -O5 -inline
                 manual -nopipeline -transform_loops -unroll 9 -automatic
                 -fkapargs='-aggressive=a -fuse -interleave
                 -ur=2 -ur3=5 -cachesize=128,16000 ' +PFB
     173.applu: kf90  -O5 -transform_loops 
                -fkapargs=' -o=0 -nointerleave -ur=14
                -ur2=260 -ur3=18' +PFB
      177.mesa: kcc -fast -O4 +CFB +IFB 
    178.galgel: f90 -O5 -fast -unroll 5 -automatic
       179.art: kcc  -assume whole_program -ldensemalloc 
                -call_shared -assume restricted_pointers 
                -unroll 16 -inline none -ckapargs=' 
                -fuse -fuselevel=1 -ur=3' +PFB
    183.equake: cc -call_shared -arch generic -fast -O4
                -ldensemalloc -assume restricted_pointers
                -inline speed -unroll 13 -xtaso_short +PFB
   187.facerec: f90 -O4 -nopipeline -inline all 
                -non_shared -speculate all -unroll 7
                -automatic -assume accuracy_sensitive 
                -math_library fast +IFB 
      188.ammp: cc -arch host -O4 -ifo -assume nomath_errno 
                -assume trusted_short_alignment -fp_reorder 
                -readonly_strings -ldensemalloc -xtaso_short 
                -assume restricted_pointers -unroll 9 
                -inline speed +CFB +IFB +PFB
     189.lucas: kf90 -O5 -fkapargs='-ur=1' +PFB 
     191.fma3d: kf90 -arch ev6 -non_shared -O4 -transform_loops
                -fkapargs='-cachesize=128,16000 ' +PFB
  200.sixtrack: f90 -fast -O5 -assume accuracy_sensitive 
                -notransform_loops +PFB
      301.apsi: kf90 -O5 -inline none -call_shared -speculate all 
                -align commons -fkapargs=' -aggressive=ab 
                -tune=ev5 -fuse -ur=1 -ur2=60 -ur3=20 
                -cachesize=128,16000'

 Most benchmarks are built using one or more types of 
 profile-driven feedback.  The types used are designated
 by abbreviations in the notes:

 +CFB: Code generation is optimized by the compiler, using 
       feedback from a training run.  These commands are
       done before the first compile (in phase "fdo_pre0"):

            mkdir /tmp/pp
            rm -f /tmp/pp/${baseexe}*

       and these flags are added to the first and second compiles:

            PASS1_CFLAGS = -prof_gen_noopt -prof_dir /tmp/pp
            PASS2_CFLAGS = -prof_use       -prof_dir /tmp/pp
 
      (Peak builds use /tmp/pp above; base builds use /tmp/pb.)

 +IFB: Icache usage is improved by the post-link-time optimizer 
       Spike, using feedback from a training run.  These commands
       are used (in phase "fdo_postN"):  

            mv ${baseexe} oldexe
            spike oldexe -feedback oldexe -o ${baseexe}

 +PFB: Prefetches are improved by the post-link-time optimizer 
       Spike, using feedback from a training run.  These
       commands are used (in phase "fdo_post_makeN"):

            rm -f *Counts*
            mv ${baseexe} oldexe
            pixie -stats dstride oldexe 1>pixie.out 2>pixie.err
            mv oldexe.pixie ${baseexe}

       A training run is carried out (in phase "fdo_runN"), and 
       then this command (in phase "fdo_postN"):

            spike oldexe -fb oldexe -stride_prefetch -o ${baseexe}

 When Spike is used for both Icache and Prefetch improvements, 
 only one spike command is actually issued, with the Icache 
 options followed by the Prefetch options.

 vm:
         vm_bigpg_enabled = 1
         vm_bigpg_thresh=16
         vm_swap_eager = 0
 
 proc:
         max_per_proc_address_space = 0x40000000000
         max_per_proc_data_size = 0x40000000000
         max_per_proc_stack_size = 0x40000000000
         max_proc_per_user = 2048
         max_threads_per_user = 0
         maxusers = 16384
         per_proc_address_space = 0x40000000000
         per_proc_data_size = 0x40000000000
         per_proc_stack_size = 0x40000000000
 
 
 Portability: galgel: -fixed
  
 Information on UNIX V5.1B Patches can be found at
 http://ftp1.service.digital.com/public/unix/v5.1b/
  
 Processes were bound to CPUs using 'runon'.
  
 In the GS1280, there are two CPUs per shelf. Each CPU 
 has its own 4GB of memory. Neither of the CPUs can be
 physically removed. For 1 CPU result measurements,
 one CPU was turned off at boot time using the
 /etc/sysconfigtab setting "cpu_enabled_mask=0". The
 second CPU's 4GB of memory was also physically removed.
 


For questions about this result, please contact the tester.
For other inquiries, please contact webmaster@spec.org
Copyright © 1999-2004 Standard Performance Evaluation Corporation

First published at SPEC.org on 28-Jan-2003

Generated on Wed Apr 13 13:13:48 2005 by SPEC CPU2000 HTML formatter v1.01