SPECsfs97_R1.v3 Result
===============================================================================
Hewlett-Packard : HP Integrity rx6600 Server
SPECsfs97_R1.v3 = NC (Overall Response Time = NC)
===============================================================================
SPEC has determined that this result was not in compliance with the SPEC
SFS97_R1 run and reporting rules. Specifically, the result did not meet
the requirement that all software components must be generally available
within six months of result publication due to the unavailability of
of required patches.
===============================================================================
Throughput Response
ops/sec msec
NC NC
NC NC
NC NC
NC NC
NC NC
NC NC
NC NC
NC NC
NC NC
NC NC
===============================================================================
Server Configuration and Availability
Vendor Hewlett-Packard
Hardware Available December 2006
Software Available November 2007
Date Tested June 2007
SFS License number 3
Licensee Location Cupertino, CA
CPU, Memory and Power
Model Name HP Integrity rx6600 Server
Processor Dual-Core Intel Itanium 2 9050 1.6GHz
# of Processors 4 cores, 2 chips, 2 cores/chip
Primary Cache 16 KB I+16 KB D on chip per core
Secondary Cache 1 MB I+256 KB D on chip per core
Other Cache 12MB I + D on chip per core
UPS N/A
Other Hardware N/A
Memory Size 192 GB (48x4GB DIMMS)
NVRAM Size 12 GB (1 GB per array)
NVRAM Type Integrated NVRAM/battery module
NVRAM Description 4-day battery, cache disabled on battery failure
Server Software
OS Name and Version HP-UX 11i V3
Other Software N/A
File System VxFS
NFS version 3
Server Tuning
Buffer Cache Size Dynamic
# NFS Processes 1
Fileset Size 789.1 GB
Network Subsystem
Network Type 10 Gigabit Jumbo Frame
Network Controller Desc. HP PCI-X 10GBase-SR
Number Networks 2 (N1-2)
Number Network Controllers 2
Protocol Type TCP
Switch Type HP Procurve 3400CL Switch
Bridge Type N/A
Hub Type N/A
Other Network Hardware N/A
Disk Subsystem and Filesystems
Number Disk Controllers 7(6 + 1 for root disk used by OS)
Number of Disks 673 (672 + 1 root disk)
Number of Filesystems 192(F1-F192)
File System Creation Ops See Notes
File System Config See Notes
Disk Controller Internal 8-port SAS Controller
# of Controller Type 1
Number of Disks 1
Disk Type Seagate 72GB 10K RPM
File Systems on Disks Operating System
Special Config Notes N/A
Disk Controller 4Gbps Dual Channel Fiber Channel PCI-X
# of Controller Type 3 (dual)
Number of Disks 672
Disk Type Seagate 36GB 15K RPM
File Systems on Disks F1-F192
Special Config Notes N/A
Load Generator (LG) Configuration
Number of Load Generators 8
Number of Processes per LG 24
Biod Max Read Setting 2
Biod Max Write Setting 2
LG Type LG1
LG Model HP Integrity rx2600 server
Number and Type Processors 2 Intel Itanium 2 900 MHz
Memory Size 2 GB
Operating System HP-UX 11i V2
Compiler HP C/ANSI C (C.11.23.09)
Compiler Options -DHAS_GETHOSTNAME -DUSE_GETRLIMIT -DSETPGRP3
Network Type HP A7012A PC-XI 1000Base-T Adapter
Testbed Configuration
LG # LG Type Network Target File Systems Notes
---- ------- ------- ------------------- -----
1 LG1 1 F1, F9, F17, F25, F33, F41, F49, F57, F65, F73, F81, F89, F97, F105, F113, F121, F129, F137, F145, F153, F161, F169, F177, F185 N/A
2 LG1 1 F2, F10, F18, F26, F34, F42, F50, F58, F66, F74, F82, F90, F98, F106, F114, F122, F130, F138, F146, F154, F162, F170, F178, F186 N/A
3 LG1 1 F3, F11, F19, F27, F35, F43, F51, F59, F67, F75, F83, F91, F99, F107, F115, F123, F131, F139, F147, F155, F163, F171, F179, F187 N/A
4 LG1 1 F4, F12, F20, F28, F36, F44, F52, F60, F68, F76, F84, F92, F100, F108, F116, F124, F132, F140, F148, F156, F164, F172, F180, F188 N/A
5 LG1 2 F5, F13, F21, F29, F37, F45, F53, F61, F69, F77, F85, F93, F101, F109, F117, F125, F133, F141, F149, F157, F165, F173, F181, F189 N/A
6 LG1 2 F6, F14, F22, F30, F38, F46, F54, F62, F70, F78, F86, F94, F102, F110, F118, F126, F134, F142, F150, F158, F166, F174, F182, F190 N/A
7 LG1 2 F7, F15, F23, F31, F39, F47, F55, F63, F71, F79, F87, F95, F103, F111, F119, F127, F135, F143, F151, F159, F167, F175, F183, F191 N/A
8 LG1 2 F8, F16, F24, F32, F40, F48, F56, F64, F72, F80, F88, F96, F104, F112, F120, F128, F136, F144, F152, F160, F168, F176, F184, F192 N/A
===============================================================================
Notes and Tuning
<> There are 6 HP StorageWorks 4/8 SAN Switches connected to the SUT
<> (one per fibre channel port). Each SAN switch connects to one controller
<> of 12 HP StorageWorks 1500cs Modular Smart Arrays. Each of the 12
<> MSA1500s has dual active fibre channel controllers. Each MSA1500 has
<> Four Modular Smart Array 30 Disk Enclosures containing 14 disks each.
<> A logical disk is carved from the MSA1500's 56 physical disks in a
<> RAID-5 configuration with 8KB stripes. There are 16 logical disks per
<> MSA1500, eight assigned to each of the MSA 1500 controllers.
<> There is one test filesystem per logical disk.
<> Each client mounts two logical disks from each MSA1500 (one from each controller).
<> VxFS is used for the OS and test filesystems (F1-F192).
<> Each test filesystem log is 32 KB, mounted with noatime (no access time update
<> except when they correspond to updated ctime or mtime)
<> Jumbo frames (9000-byte MTU) over 10Gbit Ethernet.
<>
<> Kernel Tunables
<> fcache_fb_policy=1 Filesystem flush behind request policy (default: 0)
<> filecache_max=40% Max physical memory for caching file I/O (default: 50%)
<> filecache_min=15% Min physical memory for caching file I/O (default: 5%)
<> ftable_hash_locks=32768 Number of file table locks (default: 64)
<> lcpu_attr=1 Toggles lcpu attribute of default pset (default: 0 = disabled)
<> max_thread_proc=1024 Maximum threads in each process (default: 256)
<> nkthread=24000 Maximum number of threads per system (default: 8416)
<> nproc=23000 Maximum number of processes per system (default: 4200)
<> tcphashsz=65536 Size of the TCP hash table in bytes (default: 2048)
<> vnode_hash_locks=32768 Number of vnode locks (default: 128)
<> vps_ceiling=64 Maximum system-selected page size in kBytes (default: 16)
<> vps_pagesize=64 Default user page size in kBytes (default: 16)
<> vxfs_bc_bufhwm=12000000 VxFS metadata cache high water mark (default: 0)
<> vx_ninode=3900000 Number of entries in the VxFS inode table (default: 0)
<>
<> Kernel Parameters (set with adb)
<> enable_tops=0 Interrupt Forwarding Policy (default: 1=enabled)
<>
<> NFS Parameters (set in /etc/default/nfs)
<> nfsd_listen_backlog=1024 Listen Queue len for NFS over TCP/IP (default: 32)
<> nfsd_servers=1024 Maximum concurrent NFS requests (default: 32)
<>
<> Networking Parameters set in (/etc/rc.config.d/nddconf)
<> socket_caching_tcp=5000 Entries used for TCP socket caching (default: 512)
<> tcp_conn_request_max=10000 Max outstanding inbound conn reqs. (default: 4096)
<> tcp_recv_hiwater_def=1MB Maxi size of the receive window (default: 32KB)
<> tcp_xmit_hiwater_def=1MB Unsent data level trigger flow ctrl (default: 32KB)
<>
<> 10 Gbit Parameters for both adapters set in (/etc/rc.config.d/hpixgbeconf)
<> hp_ixgbe_mtu=9000 Maximum transmission unit value in bytes (default: 1500)
<> hp_ixgbe_tx_coal_range_1=1 Range limit 1 of xmit intr coalescing (default: 5)
<> hp_ixgbe_tx_coal_range_2=5 Range limit 2 of xmit intr coalescing (default: 25)
<> hp_ixgbe_tx_coal_range_3=50 Range limit 3 for xmit inter coalescing (default: 70)
<> hp_ixgbe_tx_coal_frc_a=1 Frames for xmit intr coalescing for 0-R1 (default: 32)
<> hp_ixgbe_tx_coal_frc_b=128 Frames for xmit intr coalescing for R1-R2 (default: 256)
<> hp_ixgbe_tx_coal_frc_c=128 Frames for xmit intr coalescing for R2-R3 (default: 512)
<> hp_ixgbe_tx_coal_frc_d=128 Frames for xmit intr coalescing for R3-100(default: 512)
<> hp_ixgbe_tx_timer=22500 Transmit timer interrupt in microseconds (default: 225000)
<> hp_ixgbe_rx_coal_range_1=1 Range limit 1 for recv intr coalescing (default: 5)
<> hp_ixgbe_rx_coal_range_2=5 Range limit 2 for recv intr coalescing (default: 25)
<> hp_ixgbe_rx_coal_range_3=50 Range limit 3 for recv intr coalescing (default: 70)
<> hp_ixgbe_rx_coal_frc_a=1 Frames for recv intr coalescing for 0-R1 (default: 1)
<> hp_ixgbe_rx_coal_frc_b=128 Frames for recv intr coalescing for R1-R2 (default: 64)
<> hp_ixgbe_rx_coal_frc_c=128 Frames for recv intr coalescing for R2-R3 (default: 128)
<> hp_ixgbe_rx_coal_frc_d=128 Frames for recv intr coalescing for R3-100(default: 512)
<> hp_ixgbe_rx_timer=2000 Receive timer interrupt in microseconds (default: 100)
<>
<> Interrupts for all fibre channel adapters were assigned to CPU 0 using intctl(1M).
<> Interrupts for both 10Gbit adapters were assigned to CPU 0 using intctl(1M).
<>
<> Filesystem Parameters (set with vxtunefs for all test filesystems)
<> read_ahead=0 The preferred read request size (default 1)
<> read_pref_io=8192 The preferred read request size (default 64KB)
<> write_nstream=1000 Simultaneous parallel write requests outstanding. (default: 1)
<> write_pref_io=8192 The preferred write request size (default 64KB)
<>
<> SUT Patches
<> PHKL_36612 - VxFS cumulative patch
<> PHKL_36613 - VM cumulative patch
<> PHNE_36614 - NFS cumulative patch
<> PHNE_36614 - RPC cumulative patch
<>
<> MSA Parameters
<> read_cache=50 Percent of 512MB NVRAM used for read cache (default: 100%)
<> write_cache=50 Percent of 512MB NVRAM used for write cache (default: 0%)
<> auto_path_change=disable Implicit (auto load bal) path change (default: enabled)
<> preferred_path=controller=1 even Sets preferred path for even LUNS to ctrlr 1
<> preferred_path=controller=2 odd Sets preferred path for odd LUNS to ctrlr 2
<> acl ctrl1=0 2 Creates access control list for controller 1 for even LUNS
<> acl ctrl2=1 3 Creates access control list for controller 2 for odd LUNS
<>
<> Client Networking Parameters
<> socket_caching_tcp=5000 Entries for TCP socket caching (default: 512)
<> tcp_recv_hiwater_def=1MB Max size for the receive window (default: 32KB)
<> tcp_xmit_hiwater_def=1MB Unsent data triggers write-side flow ctrl (default: 32KB)
===============================================================================
Generated on Tue Jul 31 14:47:08 EDT 2007 by SPEC SFS97 ASCII Formatter
Copyright (c) 1997-2007 Standard Performance Evaluation Corporation
First published at SPEC.org on 31-Jul-2007