SPECweb99_SSL Result =============================================================================== || IBM : BladeCenter HS20 || 1304 SPECweb99_SSL Zeus : Zeus V4.2r2 || || =============================================================================== PERFORMANCE | Conforming Simultaneous Iteration | Connections ---------------+---------------------------- 1 | 1304 2 | 1305 3 | 1304 ---------------+---------------------------- Median | 1304 =============================================================================== Availability Dates All Hardware Sep-2003 HTTPS Software Mar-2002 Operating System Jul-2002 Supplemental System May-2002 Hardware Vendor IBM Model BladeCenter HS20 Processor 3.06 GHz Intel Xeon # Processors 2 cores, 2 chips, 1 core/chip Primary Cache 12KBI+8KBD on chip Secondary Cache 512KB Other Cache None Memory 8GB Disk Subsystem 2 40GB IDE Drives Disk Controllers Onboard IDE Other Hardware 1 Nortel Networks Switch Software Operating System Red Hat Linux 7.3 File System ext2 Other Software GCC 2.96 HTTPS Software Vendor Zeus HTTPS Software Zeus V4.2r2 API Zeus PEPP 0.8 ISAPI used for Dynamic content Server Cache None Log Mode Zeus Binary CLF Test Sponsor Test Date Jul-2003 Tested By IBM SPEC License 11 Network # of Controllers 1 Network Controllers Integrated Gigabit Ethernet # of Nets 1 Type of Nets Gigabit Ethernet Network Speed 1 Gb/s MSL (sec) 30 (Non RFC1122) Time-Wait (sec) 60 (Non RFC1122) MTU 1500 Clients # of Clients 9 Model IBM eServer xSeries 330 Processor 1133Mhz Pentium III # of Processors 1 Memory 512MB Network Controller IBM Netfinity Gigabit Ethernet Adapter Operating System Red Hat Linux 7.3 Compiler GCC 2.96 Benchmark Configuration Requested Connections 1306 Fileset Size (MB) 4299.28 =============================================================================== Notes/Tuning information SUT Notes - 2 disk Software RAID 0 for File Set and Logs - 1 partition for OS - Memory configuration 4 x 2GB DIMMs Operating System Notes Tuning parameters: - net.ipv4.ip_forward=0, default 0 - net.ipv4.conf.all.rp_filter = 1, enables source route verification, default 0 - net.ipv4.tcp_timestamps = 0, turns TCP timestamp support off, default 1 - net.ipv4.tcp_max_tw_buckets = 330000, sets TCP time-wait buckets pool size, default 180000 - net.core.rmem_max = 10000000, maximum receive socket buffer size, default 65535 - net.core.rmem_default = 10000000, default receive socket buffer size, default 65535 - net.core.wmem_max = 10000000, maximum send socket buffer size, default 65535 - net.core.wmem_default = 10000000, default send socket buffer size, default 65535 - net.core.optmem_max = 10000000, default 10240 - net.core.hot_list_length = 10000, maximum number of skb-heads to be cached, default 128 - net.ipv4.tcp_rmem = 30000000 30000000 30000000, maximum TCP read-buffer space allocatable, default 4096 87380 174760 - net.ipv4.tcp_wmem = 30000000 30000000 30000000, maximum TCP write-buffer space allocatable, default 4096 16384 131072 - net.ipv4.tcp_mem=30000000 30000000 30000000, maximum TCP buffer space, default 31744 32256 32768 Kernel is Red Hat 2.4.18-27.7x Kernel config is located in support docs as IBM-20030630-kernel.txt HTTPS Software Notes Zeus Configuration - tuning!so_wbuff_size 1048576 - tuning!softservers no - tuning!cbuff_size 65536 - tuning!clientfirst_optimise yes - tuning!ssl_sessioncache_size 5501 - tuning!sendfile yes - tuning!sendfile_minsize 1 - tuning!listen_queue_size 8192 - tuning!keepalive_timeout 20 - tuning!keepalive_max 1900 - tuning!maxaccept 64 - modules!cgi!enabled yes - modules!isapi!enabled yes Virtual Server Configuration - ip_name = server - bindaddr = 192.0.1.100 See IBM-Zeus-tuning-20021224.txt for a description of the Zeus tuning parameters ISAPI Source code is available in the SPECweb99_SSL support docs as HP-20020724-API.tar.gz HTTP API Notes Zeus ISAPI interface used Zeus PEPP 0.8 ISAPI used for Dynamic content ./Configure --sendfile=yes --checkconfig=yes --locking=lockf --ssl=yes --64bit=no Network Notes txqueuelen=20000, transmit queue length, default 100 Client Notes Client code generated with ./configure --enable-posix-threads net.ipv4.ip_local_port_range 1024 65535 =============================================================================== Test Run Details Run Conforming Percent | Throughput Response ops/sec/ Kbits/ Num Connections Conform | ops/sec msec loadgen sec 1 1304 99.8% | 3564.5 366.5 2.73 328.2 2 1305 99.9% | 3566.0 366.3 2.73 328.0 => 3 1304 99.8% | 3567.0 366.2 2.73 328.2