| Fujitsu Siemens Computers PRIMERGY RX300 S4 (INTEL Xeon E5440) | SPECpower_ssj2008 = 690 overall ssj_ops/watt | ||||
| Test Sponsor: | Fujitsu Siemens Computers | SPEC License #: | 22 | Hardware Availability: | Dec-2007 |
| Tested By: | Fujitsu Siemens Computers | Test Location: | Paderborn, Germany | Software Availability: | Oct-2007 |
| System Source: | Single Supplier | Test Date: | Jan 15, 2008 | Publication: | Jan 30, 2008 |
| Performance | Power | Performance to Power Ratio | ||
|---|---|---|---|---|
| Target Load | Actual Load | ssj_ops | Average Power (W) | |
| 100% | 99.7% | 303,846 | 265 | 1,146 |
| 90% | 89.5% | 272,811 | 259 | 1,053 |
| 80% | 79.7% | 242,870 | 252 | 963 |
| 70% | 70.0% | 213,115 | 245 | 871 |
| 60% | 59.8% | 182,251 | 235 | 777 |
| 50% | 50.2% | 152,917 | 224 | 683 |
| 40% | 40.3% | 122,829 | 212 | 580 |
| 30% | 30.0% | 91,425 | 200 | 457 |
| 20% | 20.1% | 61,124 | 191 | 321 |
| 10% | 10.1% | 30,902 | 179 | 172 |
| Active Idle | 0 | 166 | 0 | |
| ∑ssj_ops / ∑power = | 690 | |||
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu Siemens Computers |
| Model: | PRIMERGY RX300 S4 (INTEL Xeon E5440) |
| CPU Name: | Intel Xeon E5440 |
| CPU Characteristics: | 2.83 GHz, 2x6MB L2C, 1333 MHz system bus |
| CPU Frequency (MHz): | 2830 |
| CPU(s) Enabled: | 8 cores, 2 chips, 4 cores/chip |
| Hardware Threads / Core: | 1 |
| CPU(s) Orderable: | 1,2 |
| Primary Cache: | 32 KB I + 32 KB D on chip per core |
| Secondary Cache: | 12 MB I+D on chip per chip, 6 MB shared / 2 cores |
| Tertiary Cache: | None |
| Other Cache: | None |
| Memory Amount (GB): | 16 |
| # and size of DIMM: | 4x4096MB |
| Memory Details: | PC2-5300F 2Rx4 (CAS 5-5-5) |
| Power Supply Quantity and Rating (W): | 1 x 700 |
| Power Supply Details: | Fujitsu Siemens Computers DPS-700KB A |
| Disk Drive: | 1 x Western Digital WD5000AAKS 500GB 7.2 krpm 3.5" SATA |
| Disk Controller: | LSI Logic integrated SAS 3000 series, 8-port with 1068E |
| # and type of Network Interface Cards (NICs) Installed: | 2 x Broadcom BCM5708C NetXtreme II GigE (onboard) |
| NICs Enabled in Firmware / OS / Connected: | 1/1/1 |
| Network Speed (Mbit): | 1000 |
| Keyboard: | KVM |
| Mouse: | KVM |
| Monitor: | KVM |
| Optical Drives: | None |
| Other Hardware: | None |
| Software | |
|---|---|
| Power Management: | Enabled (Server Balanced Power and Performance) |
| Operating System (OS): | Microsoft(R) Windows(R) Server 2003 R2 Enterprise x64 Edition |
| OS Version: | Version 5.2.3790 Service Pack 1 Build 3790 |
| Filesystem: | NTFS |
| JVM Vendor: | BEA Systems, Inc. |
| JVM Version: | BEA JRockit(R) (build P27.4.0-10-90053-1.6.0_02-20071009-1827-windows-x86_64) |
| JVM Command-line Options: | -Xms3600m -Xns3200m -Xmx3600m -Xlargepages -XXaggressive -XXthroughputcompaction -XXlazyunlocking -XXcallprofiling -Xgc:genpar -XXgcthreads=2 -XXtlasize:min=4k,preferred=512k |
| JVM Affinity: | start /affinity [03,0c,30,c0] |
| JVM Instances: | 4 |
| JVM Initial Heap (MB): | 3600 |
| JVM Maximum Heap (MB): | 3600 |
| JVM Address Bits: | 64 |
| Benchmark Version: | SPECpower_ssj2008 1.1 |
| Director Location: | Controller |
| Other Software: | None |
| Hardware | |
|---|---|
| Hardware Vendor: | Fujitsu Siemens Computers |
| Model: | PRIMERGY RX100 S3 |
| CPU Description: | Pentium D 925 |
| Memory amount (GB): | 2 |
| Software | |
|---|---|
| Operating System (OS): | Windows Server 2003 Enterprise Edition SP1 |
| JVM Vendor: | BEA Systems, Inc. |
| JVM Version: | BEA JRockit(R) (build R27.3.1-1-85830-1.6.0_01-20070716-1248-windows-ia32) |
| CCS Version: | 1.1 |
| Power Analyzer | |
|---|---|
| Hardware Vendor: | Christ-Elektronik GmbH |
| Model: | CLM3000 |
| Serial Number: | 200707-0044 |
| Connectivity: | RS-232 |
| Calibration Institute: | PTB (Physikalisch Technische Bundesanstalt) |
| Accredited by: | DKD (Deutscher Kalibrierdienst) |
| Calibration Label: | 00715-07 DKD-K-23801 07-02 |
| Date of Calibration: | Feb-13-07 |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| PTDaemon Version: | 1.1-45c8e665 |
| Temperature Sensor | |
|---|---|
| Hardware Vendor: | Digi International Inc. |
| Model: | Watchport/H |
| Driver Version: | Watchport Virtual Port 4.20.0.0 |
| Connectivity: | USB |
| PTDaemon Host System: | same as CCS |
| PTDaemon Host OS: | same as CCS |
| Target Load | Electrical Data | Environmental Data | |||
|---|---|---|---|---|---|
| Average Voltage (V) | Average Current (A) | Average Power Factor | Average Power (W) | Minimum Ambient Temperature (°C) | |
| 100% | 228 | 1.25 | 0.926 | 265 | 20.5 |
| 90% | 229 | 1.23 | 0.924 | 259 | 20.5 |
| 80% | 228 | 1.20 | 0.922 | 252 | 20.5 |
| 70% | 227 | 1.17 | 0.921 | 245 | 20.5 |
| 60% | 227 | 1.12 | 0.918 | 235 | 20.5 |
| 50% | 229 | 1.07 | 0.913 | 224 | 20.5 |
| 40% | 230 | 1.01 | 0.909 | 212 | 20.5 |
| 30% | 229 | 0.965 | 0.905 | 200 | 20.5 |
| 20% | 229 | 0.923 | 0.901 | 191 | 20.5 |
| 10% | 230 | 0.872 | 0.896 | 179 | 20.5 |
| Active Idle | 230 | 0.810 | 0.890 | 166 | 20.5 |
| Line Standard | Average Power Factor | Minimum Temperature (°C) | Elevation (m) |
|---|---|---|---|
| 230V / 50 Hz / 1 phase / 2 wires | 0.911 | 20.5 | 117 |
| Target Load | Actual Load | ssj_ops | |
|---|---|---|---|
| Target | Actual | ||
| Calibration 1 | 301,450 | ||
| Calibration 2 | 304,995 | ||
| Calibration 3 | 304,313 | ||
| ssj_ops@calibrated=304,654 | |||
| 100% | 99.7% | 304,654 | 303,846 |
| 90% | 89.5% | 274,188 | 272,811 |
| 80% | 79.7% | 243,723 | 242,870 |
| 70% | 70.0% | 213,258 | 213,115 |
| 60% | 59.8% | 182,792 | 182,251 |
| 50% | 50.2% | 152,327 | 152,917 |
| 40% | 40.3% | 121,861 | 122,829 |
| 30% | 30.0% | 91,396 | 91,425 |
| 20% | 20.1% | 60,931 | 61,124 |
| 10% | 10.1% | 30,465 | 30,902 |
| Active Idle | 0 | 0 | |