SPECpower_ssj2008 Copyright (C) 2007-2012 Standard Performance Evaluation Corporation Huawei Technologies Co., Ltd BH622 V2 SPECpower_ssj2008 = 4,806 overall ssj_ops/watt Test Sponsor: Huawei Technologies Co., Ltd SPEC License #: 3175 Tested By: Huawei Technologies Co., Ltd Test Location: Shenzhen, Guangdong, China Test Date: Aug 21, 2012 Publication: Sep 5, 2012 Hardware Availability: Aug-2012 Software Availability: Dec-2011 Test Method: Multi Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 100.0% | 5,271,615 | 1,003 | 5,254 90% | 90.1% | 4,749,859 | 885 | 5,364 80% | 80.0% | 4,219,661 | 725 | 5,819 70% | 70.0% | 3,689,073 | 625 | 5,900 60% | 60.0% | 3,166,051 | 548 | 5,780 50% | 50.0% | 2,636,508 | 478 | 5,513 40% | 40.1% | 2,112,447 | 439 | 4,813 30% | 30.0% | 1,580,582 | 404 | 3,913 20% | 19.9% | 1,051,574 | 366 | 2,875 10% | 10.0% | 528,088 | 323 | 1,633 Active Idle | 0 | 238 | 0 sum of ssj_ops / sum of power = | 4,806 Aggregate SUT Data # of Nodes | # of Chips | # of Cores | # of | Total RAM | # of OS Images | # of JVM | | | Threads | (GB) | | Instances ---------- | ---------- | ---------- | ---------- | ---------- | -------------- | --------- 4 | 8 | 64 | 128 | 64.0 | 4 | 32 System Under Test Shared Hardware SHARED HARDWARE Enclosure: HuaWei Tecal E6000 Form Factor: 8U Power Supply Quantity and Rating 1 x 1600 (W): Power Supply Details: P/N PW98190460 Network Switch: H3C S1008A Network Switch Details: 8-PORT H3C Aolynk S1008A KVM Switch: None KVM Switch Details: N/A Other Hardware: None Comment: Network switch not measured for power Set: 'sut' Set Identifier: sut Set Description: System Under Test # of Identical Nodes: 4 Comment: None HARDWARE PER NODE Hardware Vendor: Huawei Technologies Co., Ltd Model: BH622 V2 Form Factor: Blade CPU Name: Intel Xeon E5-2660 CPU Characteristics: 8-Core, 2.20 GHz, 20 MB L3 Cache (Turbo Boost Technology up to 3.00 GHz) CPU Frequency (MHz): 2200 CPU(s) Enabled: 16 cores, 2 chips, 8 cores/chip Hardware Threads: 32 (2 / core) CPU(s) Orderable: 1,2, chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 20 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 16 # and size of DIMM: 4 x 4 GB Memory Details: 4GB 2Rx8 PC3L-10600R ECC RDIMM, Slots A1 B1, E1,F1,populated Power Supply Quantity and Rating None (W): Power Supply Details: Shared Disk Drive: 1 x 160GB SSD 2.5" SATA, Huawei P/N 02310KSX Disk Controller: Integrated SATA controller # and type of Network Interface 1 x Dual-port Intel 82580 Gigabit Ethernet Cards (NICs) Installed: controller NICs Enabled in Firmware / OS / 2/2/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE PER NODE Power Management: Power Saver enabled in OS Operating System (OS): Microsoft Windows Server 2008 Enterprise x64 Edition OS Version: R2 SP1 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_30 JVM Command-line Options: -server -Xmx1600m -Xms1600m -Xmn1200m -XX:ParallelGCThreads=2 -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:LoopUnrollLimit=45 -XX:+UseCompressedStrings -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC JVM Affinity: start /affinity [0xF,0xF0,0xF00,0xF000,0xF0000,0xF00000,0xF0 00000,0xF0000000,0xF00000000,0xF000000000,0x F0000000000,0xF00000000000,0xF000000000000,0 xF0000000000000,0xF00000000000000,0xF0000000 00000000] JVM Instances: 8 JVM Initial Heap (MB): 1600 JVM Maximum Heap (MB): 1600 JVM Address Bits: 64 Boot Firmware Version: V030 Management Firmware Version: 3.06 Workload Version: SSJ 1.2.9 Director Location: Controller Other Software: None Boot Firmware Settings * Hardware prefetcher -disabled. * Adjacent Cache Line Prefetch -disabled. * DCU Streamer Prefetcher -disabled. * Intel HT Technology -enabled. * Turbo mode -enabled. * C-state -enabled. * Power Mode -Efficiency. * QPI Link Speed -6.4GT/s. * Memory Frequency Limit -1333MHz. * Demand Scrubbing -disabled. * USB configuration EHCI 2 -disabled. Management Firmware Settings none System Under Test Notes * The test was started via Remote Desktop. * Minimum Processor State: 0%. * Maximum Processor State: 100%. * Turn off hard disk after 1 minute . * Each JVM instance was affinitized to four logical processors. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. Controller System HARDWARE Hardware Vendor: Huawei Technologies Co., Ltd Model: Tecal RH2280 Rack Server CPU Description: Intel Xeon 5205 Memory amount (GB): 6 SOFTWARE Operating System (OS): Microsoft Windows Server 2003 SP2 JVM Vendor: Oracle JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM on Windows, version 1.6.0_30 CCS Version: 1.2.5 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Meters and Instruments Corporation Model: WT210 Serial Number: 91K630156 Connectivity: RS-232 Input Connection: Default Metrology Institute: CNAS (China National Accreditation Service for Conformity Assessment) Accredited by: Calibration and Testing Center of CEPREI Calibration Label: 2GB12006186-0010 Date of Calibration: 30-Jul-2012 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.4.1-1271fb18-20110728 Setup Description: none TEMPERATURE SENSOR TEMP1 Hardware Vendor: Temperature@lert Model: TM-STD30 Driver Version: 3.1.0.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: The Temperature@lert-TM-STD30 used a 2 meters USB extension cable to connect to the controller. The Temperature@lert probe was placed in front of the main airflow inlet of the SUT less than 50mm. Notes SPECpower_ssj.props input.load_level.number_warehouses set to 32 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 1,003 | 22.7 90% | 885 | 22.7 80% | 725 | 22.6 70% | 625 | 22.6 60% | 548 | 22.6 50% | 478 | 22.6 40% | 439 | 22.5 30% | 404 | 22.5 20% | 366 | 22.4 10% | 323 | 22.4 Active Idle | 238 | 22.4 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 220V / 50 Hz / 1 phase / | 22.4 | 101 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20120821-00527-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 5,295,514 Calibration 2 | | | 5,275,057 Calibration 3 | | | 5,272,246 ssj_ops@calibrated=5,273,651 100% | 100.0% | 5,273,651 | 5,271,615 90% | 90.1% | 4,746,286 | 4,749,859 80% | 80.0% | 4,218,921 | 4,219,661 70% | 70.0% | 3,691,556 | 3,689,073 60% | 60.0% | 3,164,191 | 3,166,051 50% | 50.0% | 2,636,826 | 2,636,508 40% | 40.1% | 2,109,461 | 2,112,447 30% | 30.0% | 1,582,095 | 1,580,582 20% | 19.9% | 1,054,730 | 1,051,574 10% | 10.0% | 527,365 | 528,088 Active Idle | | 0 | 0 See the Aggregate Performance Report (power_ssj2008-20120821-00527.sut.txt) for additional details. Copyright (C) 2007-2012 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.9, July 28, 2011]