SPECpower_ssj2008 Copyright (C) 2007-2012 Standard Performance Evaluation Corporation Cisco Systems, Inc. UCS C220 M3 SPECpower_ssj2008 = 4,904 overall ssj_ops/watt Test Sponsor: Cisco Systems, Inc. SPEC License #: 3184 Tested By: Principled Technologies, Inc. Test Location: Durham, NC, USA Test Date: Oct 3, 2012 Publication: Oct 17, 2012 Hardware Availability: Mar-2012 Software Availability: Aug-2012 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 98.3% | 1,443,280 | 261 | 5,537 90% | 89.3% | 1,310,409 | 233 | 5,619 80% | 79.7% | 1,170,404 | 204 | 5,724 70% | 69.9% | 1,025,951 | 177 | 5,801 60% | 60.0% | 880,394 | 153 | 5,768 50% | 50.1% | 734,623 | 136 | 5,416 40% | 40.1% | 588,584 | 120 | 4,897 30% | 29.9% | 438,980 | 109 | 4,030 20% | 20.0% | 294,230 | 98.5 | 2,987 10% | 10.0% | 146,499 | 87.6 | 1,673 Active Idle | 0 | 59.5 | 0 sum of ssj_ops / sum of power = | 4,904 System Under Test Set: 'sut' Set Identifier: sut Set Description: System Under Test # of Identical Nodes: 1 Comment: UCS C220 M3 Rack Server HARDWARE Hardware Vendor: Cisco Systems, Inc. Model: UCS C220 M3 Form Factor: 1U CPU Name: Intel Xeon E5-2660 CPU Characteristics: 8 Core, 2.20 GHz (Intel Turbo Boost Technology up to 3.00 GHz) CPU Frequency (MHz): 2200 CPU(s) Enabled: 16 cores, 2 chips, 8 cores/chip Hardware Threads: 32 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 20 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 24 # and size of DIMM: 6 x 4096 MB Memory Details: 4GB 2Rx8 PC3L-10600E-9 ECC; Slots A1-C1,E1-G1 populated. Power Supply Quantity and Rating 1 x 450 (W): Power Supply Details: Cisco P/N UCSC-PSU-450W Disk Drive: 1 x 100GB Std Height 15mm SATA SSD, Cisco P/N UCS-SD100G0KA2-E Disk Controller: Integrated Storage Controller Unit (SCU) # and type of Network Interface 2 x 1 GbE Intel i350 PCIe-based Gigabit Cards (NICs) Installed: Ethernet controller NICs Enabled in Firmware / OS / 2/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise Edition OS Version: SP1 Filesystem: NTFS JVM Vendor: IBM Corporation JVM Version: IBM J9 VM (build 2.6,JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 JIT enabled, AOT enabled) JVM Command-line Options: -Xaggressive -Xcompressedrefs -Xmx1600m -Xms1600m -Xmn1300m -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 JVM Affinity: start /high /affinity [F,F0,F00,F000,F0000,F00000,F000000,F0000000 ] JVM Instances: 8 JVM Initial Heap (MB): 1600 JVM Maximum Heap (MB): 1600 JVM Address Bits: 64 Boot Firmware Version: 1.4.6a.0 Management Firmware Version: 1.4(5b) Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: IBM SDK Java Technology Edition Version 7.0 for Windows x64 Boot Firmware Settings * Intel VT set to Disabled * Intel VT-d set to Disabled * Hardware Prefetcher set to Disabled * Adjacent Cache Line Prefetcher set to Disabled * DCU Streamer Prefetcher set to Disabled * Power Technology set to Custom * P-State Coordination set to SW_ANY * Low Voltage DDR Mode set to Power Saving Mode * Patrol Scrub set to Disabled * Demand Scrub set to Disabled * QPI Link Frequency Select set to 6.4 GT/s * Onboard SCU Storage Support set to Enabled * All USB Devices set to Disabled * ASPM Support set to Auto Management Firmware Settings * vKVM Properties set to Disabled * Virtual Media Properties set to Disabled System Under Test Notes * Each JVM instance was bound to 4 logical processors * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark * Run initiated via Windows Remote Desktop Connection * Power Option set to Balanced * Link State Power Management set to Maximum power savings * Hard Disk set to turn off after one minute * Display set to turn off after one minute * Minimum processor state set to 0% Controller System HARDWARE Hardware Vendor: Intel Corporation Model: Intel Server Board S5000PSL CPU Description: Intel Xeon E5345 Memory amount (GB): 8 SOFTWARE Operating System (OS): Windows Server 2008 R2 Enterprise Edition SP1 JVM Vendor: IBM JVM Version: IBM J9 VM (build 2.6,JRE 1.7.0 Windows Server 2008 R2 amd64-64 20120322_106209 JIT enabled, AOT enabled) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Meters and Instruments Corporation Model: WT210 Serial Number: 91GB51135 Connectivity: RS232 Input Connection: Default Metrology Institute: NIST Accredited by: Tektronix Calibration Label: 07-1684 Date of Calibration: 06-Dec-2011 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.4.2-bc965ca0-20120417 Setup Description: Connected to SUT Power Supply Unit (PSU) 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Model: Watchport/H Driver Version: Watchport Virtual Port 5.30.2.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes Used USB-to-Serial converter, Model Sabrent SBT-USC1M (driver version 2.0.2.1), to connect power analyzer to the controller Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 261 | 20.9 90% | 233 | 20.6 80% | 204 | 21.2 70% | 177 | 20.5 60% | 153 | 20.6 50% | 136 | 20.4 40% | 120 | 20.4 30% | 109 | 20.6 20% | 98.5 | 20.3 10% | 87.6 | 20.9 Active Idle | 59.5 | 20.3 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 20.3 | 26 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20121002-00552-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 1,437,830 Calibration 2 | | | 1,465,946 Calibration 3 | | | 1,469,589 ssj_ops@calibrated=1,467,768 100% | 98.3% | 1,467,768 | 1,443,280 90% | 89.3% | 1,320,991 | 1,310,409 80% | 79.7% | 1,174,214 | 1,170,404 70% | 69.9% | 1,027,437 | 1,025,951 60% | 60.0% | 880,661 | 880,394 50% | 50.1% | 733,884 | 734,623 40% | 40.1% | 587,107 | 588,584 30% | 29.9% | 440,330 | 438,980 20% | 20.0% | 293,554 | 294,230 10% | 10.0% | 146,777 | 146,499 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20121002-00552.Computer.txt) for additional details. Copyright (C) 2007-2012 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.9, July 28, 2011]