SPECpower_ssj2008 Copyright (C) 2007-2016 Standard Performance Evaluation Corporation Fujitsu FUJITSU Server PRIMERGY RX2560 M2 SPECpower_ssj2008 = 12,079 overall ssj_ops/watt Test Sponsor: Fujitsu SPEC License #: 19 Tested By: Fujitsu Test Location: Paderborn, NRW, Germany Test Date: Mar 9, 2016 Publication: Apr 15, 2016 Hardware Availability: Apr-2016 Software Availability: Jan-2015 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.9% | 3,448,187 | 243 | 14,183 90% | 89.8% | 3,097,846 | 218 | 14,202 80% | 80.1% | 2,766,075 | 192 | 14,404 70% | 69.9% | 2,411,569 | 167 | 14,439 60% | 60.0% | 2,071,973 | 152 | 13,668 50% | 50.0% | 1,726,591 | 139 | 12,421 40% | 40.1% | 1,384,205 | 127 | 10,873 30% | 30.2% | 1,041,259 | 113 | 9,252 20% | 20.0% | 690,526 | 96.9 | 7,125 10% | 10.0% | 343,507 | 82.0 | 4,188 Active Idle | 0 | 41.7 | 0 sum of ssj_ops / sum of power = | 12,079 System Under Test Set: 'RX2560 M2' Set Identifier: RX2560 M2 Set Description: System Under Test # of Identical Nodes: 1 Comment: Single Node HARDWARE Hardware Vendor: Fujitsu Model: FUJITSU Server PRIMERGY RX2560 M2 Form Factor: 4U CPU Name: Intel Xeon E5-2699 v4 CPU Characteristics: 22-Core, 2.20GHz, 55MB L3 Cache CPU Frequency (MHz): 2200 CPU(s) Enabled: 44 cores, 2 chips, 22 cores/chip Hardware Threads: 88 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 55 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 64 # and size of DIMM: 8 x 8192 MB Memory Details: 8 GB DDR4, registered, ECC, 2400 MHz, PC4-2400R, DIMM, 2Rx8; slots 1A, 1B, 1C, 1D, 1E, 1F, 1G, 1H populated Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: Fujitsu Technology Solutions S26113-F615-E10 Disk Drive: 1 x SSD SATA 6G 64GB DOM N H-P, S26361-F5522-E64 Disk Controller: Integrated SATA Controller # and type of Network Interface 1 x PLAN AP 1x1Gbit Cu Intel I210-T1 Cards (NICs) Installed: (Copper), S26361-F3852-E1 NICs Enabled in Firmware / OS / 1/1/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled ("Fujitsu Enhanced Power Settings" power plan) Operating System (OS): Microsoft Windows Server 2012 R2 Standard OS Version: Version 6.3.9600 Build 9600 Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn11g -Xms13g -Xmx13g -XX:SurvivorRatio=60 -XX:TargetSurvivorRatio=90 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:ParallelGCThreads=22 -XX:InlineSmallCode=3900 -XX:MaxInlineSize=270 -XX:FreqInlineSize=2500 -XX:+AggressiveOpts -XX:+UseLargePages -XX:+UseParallelOldGC -XX:-UseAdaptiveSizePolicy JVM Affinity: start /NODE [0,1,2,3] /AFFINTY 0x3FFFFF JVM Instances: 4 JVM Initial Heap (MB): 13000 JVM Maximum Heap (MB): 13000 JVM Address Bits: 64 Boot Firmware Version: R1.5.0 Management Firmware Version: 8.13F Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: None Boot Firmware Settings * Set "Hardware Prefetcher = Disabled" in BIOS. * Set "Adjacent Cache Line Prefetch = Disabled" in BIOS. * Set "DCU Streamer Prefetcher = Disabled" in BIOS. * Set "ASPM Support = L1 Only" in BIOS. * Set "DMI Control = Gen1" in BIOS. * Set "Onboard USB Controllers = Disabled" in BIOS. * Set "Power Technology = Custom" in BIOS. * Set "Turbo Mode = Disabled" in BIOS. * Set "Autonomous C-state Support = Enabled" in BIOS. * Set "Uncore Frequency Override = Nominal" in BIOS. * Set "QPI Link Frequency Select = 6.4 GT/s" in BIOS. * Set "Override OS Energy Performance = Enabled" in BIOS. * Set "Energy Performance = Energy Efficient" in BIOS. * Set "DDR Performance = Energy optimized" in BIOS. (effective memory frequency = 1866 MHz) * Set "Intel Virtualization Technology = Disabled" in BIOS. * Set "COD Enable = Enabled" in BIOS. Management Firmware Settings None System Under Test Notes * Set "Turn off hard disk after = 1 Minute" in OS. * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark was started via Windows Remote Desktop Connection. * Each JVM instance was affinitized to 22 logical processors. Controller System HARDWARE Hardware Vendor: Fujitsu Model: PRIMERGY RX200 S6 CPU Description: Intel Xeon X5680 Memory amount (GB): 48 SOFTWARE Operating System (OS): Microsoft Windows Server 2008 R2 Enterprise SP1 JVM Vendor: Oracle Corporation JVM Version: Oracle Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: ZES Zimmer Electronic Systems GmbH Model: LMG95 Serial Number: 11210802 Connectivity: RS-232 Input Connection: Default (20A) Metrology Institute: PTB (Physikalisch Technische Bundesanstalt) Accredited by: Atlas Copco Tools Central Europe GmbH Calibration Label: W15113632 Date of Calibration: 30-Nov-2015 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.0-efc0c004-20160120 Setup Description: Connected to PSU 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: Watchport Virtual Port 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main air intake Notes * SPECpower_ssj.props input.load_level.number_warehouses set to 88 due to a known inconsistency in processor reporting with this Java version. Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 243 | 20.4 90% | 218 | 20.6 80% | 192 | 21.1 70% | 167 | 21.0 60% | 152 | 20.7 50% | 139 | 20.4 40% | 127 | 20.4 30% | 113 | 20.7 20% | 96.9 | 21.0 10% | 82.0 | 20.8 Active Idle | 41.7 | 20.4 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 230V / 50 Hz / 1 phase / | 20.4 | 117 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20160317-00716-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 3,432,572 Calibration 2 | | | 3,462,340 Calibration 3 | | | 3,440,842 ssj_ops@calibrated=3,451,591 100% | 99.9% | 3,451,591 | 3,448,187 90% | 89.8% | 3,106,432 | 3,097,846 80% | 80.1% | 2,761,273 | 2,766,075 70% | 69.9% | 2,416,114 | 2,411,569 60% | 60.0% | 2,070,955 | 2,071,973 50% | 50.0% | 1,725,796 | 1,726,591 40% | 40.1% | 1,380,636 | 1,384,205 30% | 30.2% | 1,035,477 | 1,041,259 20% | 20.0% | 690,318 | 690,526 10% | 10.0% | 345,159 | 343,507 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20160317-00716.WIN-CICQLO9RTVD.txt) for additional details. Copyright (C) 2007-2016 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]