Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-431.el6.x86_64 (mockbuild@x86-023.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-4) (GCC) ) #1 SMP Sun Nov 10 22:19:54 EST 2013
Command line: ro root=/dev/mapper/vg_vnct13-lv_root rd_LVM_LV=vg_vnct13/lv_root rd_NO_LUKS rd_LVM_LV=vg_vnct13/lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM LANG=en_US.UTF-8 rhgb quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000006c000 (usable)
 BIOS-e820: 000000000006c000 - 000000000006d000 (ACPI NVS)
 BIOS-e820: 000000000006d000 - 000000000009f000 (usable)
 BIOS-e820: 000000000009f000 - 00000000000a0000 (ACPI NVS)
 BIOS-e820: 0000000000100000 - 000000007d4c6000 (usable)
 BIOS-e820: 000000007d4c6000 - 000000007d4e8000 (reserved)
 BIOS-e820: 000000007d4e8000 - 000000007d52a000 (usable)
 BIOS-e820: 000000007d52a000 - 000000007d54c000 (reserved)
 BIOS-e820: 000000007d54c000 - 000000007d8ee000 (usable)
 BIOS-e820: 000000007d8ee000 - 000000007d99e000 (reserved)
 BIOS-e820: 000000007d99e000 - 000000007f5ef000 (usable)
 BIOS-e820: 000000007f5ef000 - 000000007f6df000 (reserved)
 BIOS-e820: 000000007f6df000 - 000000007f7df000 (ACPI NVS)
 BIOS-e820: 000000007f7df000 - 000000007f7ff000 (ACPI data)
 BIOS-e820: 000000007f7ff000 - 000000007f800000 (usable)
 BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000680000000 (usable)
EFI v2.10 by IBM
 ACPI 2.0=0x7f7fe014  SMBIOS=0x7f6be000 
EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000001d000) (0MB)
EFI: mem02: type=2, attr=0xf, range=[0x000000000001d000-0x000000000001f000) (0MB)
EFI: mem03: type=4, attr=0xf, range=[0x000000000001f000-0x0000000000020000) (0MB)
EFI: mem04: type=3, attr=0xf, range=[0x0000000000020000-0x000000000006c000) (0MB)
EFI: mem05: type=10, attr=0xf, range=[0x000000000006c000-0x000000000006d000) (0MB)
EFI: mem06: type=3, attr=0xf, range=[0x000000000006d000-0x000000000009f000) (0MB)
EFI: mem07: type=10, attr=0xf, range=[0x000000000009f000-0x00000000000a0000) (0MB)
EFI: mem08: type=7, attr=0xf, range=[0x0000000000100000-0x0000000000400000) (3MB)
EFI: mem09: type=3, attr=0xf, range=[0x0000000000400000-0x000000000044c000) (0MB)
EFI: mem10: type=7, attr=0xf, range=[0x000000000044c000-0x0000000000800000) (3MB)
EFI: mem11: type=3, attr=0xf, range=[0x0000000000800000-0x0000000001000000) (8MB)
EFI: mem12: type=7, attr=0xf, range=[0x0000000001000000-0x0000000079d3f000) (1933MB)
EFI: mem13: type=2, attr=0xf, range=[0x0000000079d3f000-0x000000007b568000) (24MB)
EFI: mem14: type=4, attr=0xf, range=[0x000000007b568000-0x000000007bf6a000) (10MB)
EFI: mem15: type=2, attr=0xf, range=[0x000000007bf6a000-0x000000007c36a000) (4MB)
EFI: mem16: type=1, attr=0xf, range=[0x000000007c36a000-0x000000007c3aa000) (0MB)
EFI: mem17: type=7, attr=0xf, range=[0x000000007c3aa000-0x000000007c3db000) (0MB)
EFI: mem18: type=2, attr=0xf, range=[0x000000007c3db000-0x000000007c3e8000) (0MB)
EFI: mem19: type=4, attr=0xf, range=[0x000000007c3e8000-0x000000007c3fe000) (0MB)
EFI: mem20: type=2, attr=0xf, range=[0x000000007c3fe000-0x000000007c5d3000) (1MB)
EFI: mem21: type=4, attr=0xf, range=[0x000000007c5d3000-0x000000007c788000) (1MB)
EFI: mem22: type=3, attr=0xf, range=[0x000000007c788000-0x000000007c789000) (0MB)
EFI: mem23: type=4, attr=0xf, range=[0x000000007c789000-0x000000007d424000) (12MB)
EFI: mem24: type=2, attr=0xf, range=[0x000000007d424000-0x000000007d426000) (0MB)
EFI: mem25: type=4, attr=0xf, range=[0x000000007d426000-0x000000007d428000) (0MB)
EFI: mem26: type=2, attr=0xf, range=[0x000000007d428000-0x000000007d429000) (0MB)
EFI: mem27: type=4, attr=0xf, range=[0x000000007d429000-0x000000007d435000) (0MB)
EFI: mem28: type=3, attr=0xf, range=[0x000000007d435000-0x000000007d441000) (0MB)
EFI: mem29: type=4, attr=0xf, range=[0x000000007d441000-0x000000007d4c6000) (0MB)
EFI: mem30: type=5, attr=0x800000000000000f, range=[0x000000007d4c6000-0x000000007d4e8000) (0MB)
EFI: mem31: type=4, attr=0xf, range=[0x000000007d4e8000-0x000000007d52a000) (0MB)
EFI: mem32: type=5, attr=0x800000000000000f, range=[0x000000007d52a000-0x000000007d54c000) (0MB)
EFI: mem33: type=4, attr=0xf, range=[0x000000007d54c000-0x000000007d5ee000) (0MB)
EFI: mem34: type=3, attr=0xf, range=[0x000000007d5ee000-0x000000007d5f0000) (0MB)
EFI: mem35: type=4, attr=0xf, range=[0x000000007d5f0000-0x000000007d5f3000) (0MB)
EFI: mem36: type=3, attr=0xf, range=[0x000000007d5f3000-0x000000007d5f4000) (0MB)
EFI: mem37: type=4, attr=0xf, range=[0x000000007d5f4000-0x000000007d8c6000) (2MB)
EFI: mem38: type=3, attr=0xf, range=[0x000000007d8c6000-0x000000007d8cc000) (0MB)
EFI: mem39: type=4, attr=0xf, range=[0x000000007d8cc000-0x000000007d8ee000) (0MB)
EFI: mem40: type=0, attr=0xf, range=[0x000000007d8ee000-0x000000007d99e000) (0MB)
EFI: mem41: type=4, attr=0xf, range=[0x000000007d99e000-0x000000007d9b8000) (0MB)
EFI: mem42: type=3, attr=0xf, range=[0x000000007d9b8000-0x000000007d9bf000) (0MB)
EFI: mem43: type=4, attr=0xf, range=[0x000000007d9bf000-0x000000007da17000) (0MB)
EFI: mem44: type=3, attr=0xf, range=[0x000000007da17000-0x000000007da19000) (0MB)
EFI: mem45: type=4, attr=0xf, range=[0x000000007da19000-0x000000007da36000) (0MB)
EFI: mem46: type=3, attr=0xf, range=[0x000000007da36000-0x000000007da3d000) (0MB)
EFI: mem47: type=4, attr=0xf, range=[0x000000007da3d000-0x000000007db56000) (1MB)
EFI: mem48: type=3, attr=0xf, range=[0x000000007db56000-0x000000007db61000) (0MB)
EFI: mem49: type=4, attr=0xf, range=[0x000000007db61000-0x000000007db69000) (0MB)
EFI: mem50: type=3, attr=0xf, range=[0x000000007db69000-0x000000007db77000) (0MB)
EFI: mem51: type=4, attr=0xf, range=[0x000000007db77000-0x000000007db7d000) (0MB)
EFI: mem52: type=3, attr=0xf, range=[0x000000007db7d000-0x000000007db87000) (0MB)
EFI: mem53: type=4, attr=0xf, range=[0x000000007db87000-0x000000007db8b000) (0MB)
EFI: mem54: type=3, attr=0xf, range=[0x000000007db8b000-0x000000007dba1000) (0MB)
EFI: mem55: type=4, attr=0xf, range=[0x000000007dba1000-0x000000007dba7000) (0MB)
EFI: mem56: type=3, attr=0xf, range=[0x000000007dba7000-0x000000007dbb9000) (0MB)
EFI: mem57: type=4, attr=0xf, range=[0x000000007dbb9000-0x000000007dbbc000) (0MB)
EFI: mem58: type=3, attr=0xf, range=[0x000000007dbbc000-0x000000007dbcb000) (0MB)
EFI: mem59: type=4, attr=0xf, range=[0x000000007dbcb000-0x000000007dbcc000) (0MB)
EFI: mem60: type=3, attr=0xf, range=[0x000000007dbcc000-0x000000007dbda000) (0MB)
EFI: mem61: type=4, attr=0xf, range=[0x000000007dbda000-0x000000007dbdb000) (0MB)
EFI: mem62: type=3, attr=0xf, range=[0x000000007dbdb000-0x000000007dbdd000) (0MB)
EFI: mem63: type=4, attr=0xf, range=[0x000000007dbdd000-0x000000007dbe1000) (0MB)
EFI: mem64: type=3, attr=0xf, range=[0x000000007dbe1000-0x000000007dbe4000) (0MB)
EFI: mem65: type=2, attr=0xf, range=[0x000000007dbe4000-0x000000007ddb7000) (1MB)
EFI: mem66: type=4, attr=0xf, range=[0x000000007ddb7000-0x000000007df8e000) (1MB)
EFI: mem67: type=3, attr=0xf, range=[0x000000007df8e000-0x000000007dfeb000) (0MB)
EFI: mem68: type=4, attr=0xf, range=[0x000000007dfeb000-0x000000007dfec000) (0MB)
EFI: mem69: type=3, attr=0xf, range=[0x000000007dfec000-0x000000007dfed000) (0MB)
EFI: mem70: type=4, attr=0xf, range=[0x000000007dfed000-0x000000007dfef000) (0MB)
EFI: mem71: type=3, attr=0xf, range=[0x000000007dfef000-0x000000007dff5000) (0MB)
EFI: mem72: type=4, attr=0xf, range=[0x000000007dff5000-0x000000007dff7000) (0MB)
EFI: mem73: type=3, attr=0xf, range=[0x000000007dff7000-0x000000007e00c000) (0MB)
EFI: mem74: type=4, attr=0xf, range=[0x000000007e00c000-0x000000007e00e000) (0MB)
EFI: mem75: type=3, attr=0xf, range=[0x000000007e00e000-0x000000007e015000) (0MB)
EFI: mem76: type=4, attr=0xf, range=[0x000000007e015000-0x000000007e016000) (0MB)
EFI: mem77: type=3, attr=0xf, range=[0x000000007e016000-0x000000007e017000) (0MB)
EFI: mem78: type=4, attr=0xf, range=[0x000000007e017000-0x000000007e018000) (0MB)
EFI: mem79: type=3, attr=0xf, range=[0x000000007e018000-0x000000007e01c000) (0MB)
EFI: mem80: type=4, attr=0xf, range=[0x000000007e01c000-0x000000007e020000) (0MB)
EFI: mem81: type=3, attr=0xf, range=[0x000000007e020000-0x000000007e029000) (0MB)
EFI: mem82: type=4, attr=0xf, range=[0x000000007e029000-0x000000007e02a000) (0MB)
EFI: mem83: type=3, attr=0xf, range=[0x000000007e02a000-0x000000007e030000) (0MB)
EFI: mem84: type=4, attr=0xf, range=[0x000000007e030000-0x000000007e039000) (0MB)
EFI: mem85: type=3, attr=0xf, range=[0x000000007e039000-0x000000007e042000) (0MB)
EFI: mem86: type=4, attr=0xf, range=[0x000000007e042000-0x000000007e0f2000) (0MB)
EFI: mem87: type=3, attr=0xf, range=[0x000000007e0f2000-0x000000007e0ff000) (0MB)
EFI: mem88: type=4, attr=0xf, range=[0x000000007e0ff000-0x000000007e100000) (0MB)
EFI: mem89: type=3, attr=0xf, range=[0x000000007e100000-0x000000007e104000) (0MB)
EFI: mem90: type=4, attr=0xf, range=[0x000000007e104000-0x000000007e105000) (0MB)
EFI: mem91: type=3, attr=0xf, range=[0x000000007e105000-0x000000007e11b000) (0MB)
EFI: mem92: type=4, attr=0xf, range=[0x000000007e11b000-0x000000007e11c000) (0MB)
EFI: mem93: type=3, attr=0xf, range=[0x000000007e11c000-0x000000007e124000) (0MB)
EFI: mem94: type=4, attr=0xf, range=[0x000000007e124000-0x000000007e125000) (0MB)
EFI: mem95: type=3, attr=0xf, range=[0x000000007e125000-0x000000007e12c000) (0MB)
EFI: mem96: type=4, attr=0xf, range=[0x000000007e12c000-0x000000007e16c000) (0MB)
EFI: mem97: type=3, attr=0xf, range=[0x000000007e16c000-0x000000007e185000) (0MB)
EFI: mem98: type=4, attr=0xf, range=[0x000000007e185000-0x000000007e188000) (0MB)
EFI: mem99: type=3, attr=0xf, range=[0x000000007e188000-0x000000007e189000) (0MB)
EFI: mem100: type=4, attr=0xf, range=[0x000000007e189000-0x000000007e18f000) (0MB)
EFI: mem101: type=3, attr=0xf, range=[0x000000007e18f000-0x000000007e190000) (0MB)
EFI: mem102: type=4, attr=0xf, range=[0x000000007e190000-0x000000007e197000) (0MB)
EFI: mem103: type=3, attr=0xf, range=[0x000000007e197000-0x000000007e199000) (0MB)
EFI: mem104: type=4, attr=0xf, range=[0x000000007e199000-0x000000007e19b000) (0MB)
EFI: mem105: type=3, attr=0xf, range=[0x000000007e19b000-0x000000007e19f000) (0MB)
EFI: mem106: type=4, attr=0xf, range=[0x000000007e19f000-0x000000007e1a1000) (0MB)
EFI: mem107: type=3, attr=0xf, range=[0x000000007e1a1000-0x000000007e1a4000) (0MB)
EFI: mem108: type=4, attr=0xf, range=[0x000000007e1a4000-0x000000007e5a4000) (4MB)
EFI: mem109: type=3, attr=0xf, range=[0x000000007e5a4000-0x000000007e5ab000) (0MB)
EFI: mem110: type=4, attr=0xf, range=[0x000000007e5ab000-0x000000007e5b1000) (0MB)
EFI: mem111: type=3, attr=0xf, range=[0x000000007e5b1000-0x000000007e5b3000) (0MB)
EFI: mem112: type=4, attr=0xf, range=[0x000000007e5b3000-0x000000007e5b5000) (0MB)
EFI: mem113: type=3, attr=0xf, range=[0x000000007e5b5000-0x000000007e5b7000) (0MB)
EFI: mem114: type=4, attr=0xf, range=[0x000000007e5b7000-0x000000007e5c2000) (0MB)
EFI: mem115: type=3, attr=0xf, range=[0x000000007e5c2000-0x000000007e5c3000) (0MB)
EFI: mem116: type=4, attr=0xf, range=[0x000000007e5c3000-0x000000007e5c5000) (0MB)
EFI: mem117: type=3, attr=0xf, range=[0x000000007e5c5000-0x000000007e5c6000) (0MB)
EFI: mem118: type=4, attr=0xf, range=[0x000000007e5c6000-0x000000007e5ea000) (0MB)
EFI: mem119: type=3, attr=0xf, range=[0x000000007e5ea000-0x000000007e5ee000) (0MB)
EFI: mem120: type=4, attr=0xf, range=[0x000000007e5ee000-0x000000007e5ef000) (0MB)
EFI: mem121: type=3, attr=0xf, range=[0x000000007e5ef000-0x000000007e5f2000) (0MB)
EFI: mem122: type=4, attr=0xf, range=[0x000000007e5f2000-0x000000007e5f3000) (0MB)
EFI: mem123: type=3, attr=0xf, range=[0x000000007e5f3000-0x000000007e5f4000) (0MB)
EFI: mem124: type=4, attr=0xf, range=[0x000000007e5f4000-0x000000007e5f8000) (0MB)
EFI: mem125: type=3, attr=0xf, range=[0x000000007e5f8000-0x000000007e5f9000) (0MB)
EFI: mem126: type=4, attr=0xf, range=[0x000000007e5f9000-0x000000007e601000) (0MB)
EFI: mem127: type=3, attr=0xf, range=[0x000000007e601000-0x000000007e603000) (0MB)
EFI: mem128: type=4, attr=0xf, range=[0x000000007e603000-0x000000007e604000) (0MB)
EFI: mem129: type=3, attr=0xf, range=[0x000000007e604000-0x000000007e607000) (0MB)
EFI: mem130: type=4, attr=0xf, range=[0x000000007e607000-0x000000007e616000) (0MB)
EFI: mem131: type=3, attr=0xf, range=[0x000000007e616000-0x000000007e617000) (0MB)
EFI: mem132: type=4, attr=0xf, range=[0x000000007e617000-0x000000007e64f000) (0MB)
EFI: mem133: type=3, attr=0xf, range=[0x000000007e64f000-0x000000007e65c000) (0MB)
EFI: mem134: type=4, attr=0xf, range=[0x000000007e65c000-0x000000007e6c4000) (0MB)
EFI: mem135: type=3, attr=0xf, range=[0x000000007e6c4000-0x000000007e6e3000) (0MB)
EFI: mem136: type=4, attr=0xf, range=[0x000000007e6e3000-0x000000007e6e7000) (0MB)
EFI: mem137: type=3, attr=0xf, range=[0x000000007e6e7000-0x000000007e6f0000) (0MB)
EFI: mem138: type=4, attr=0xf, range=[0x000000007e6f0000-0x000000007e738000) (0MB)
EFI: mem139: type=3, attr=0xf, range=[0x000000007e738000-0x000000007e752000) (0MB)
EFI: mem140: type=4, attr=0xf, range=[0x000000007e752000-0x000000007e757000) (0MB)
EFI: mem141: type=3, attr=0xf, range=[0x000000007e757000-0x000000007e758000) (0MB)
EFI: mem142: type=4, attr=0xf, range=[0x000000007e758000-0x000000007e763000) (0MB)
EFI: mem143: type=3, attr=0xf, range=[0x000000007e763000-0x000000007e76b000) (0MB)
EFI: mem144: type=4, attr=0xf, range=[0x000000007e76b000-0x000000007e776000) (0MB)
EFI: mem145: type=3, attr=0xf, range=[0x000000007e776000-0x000000007e78e000) (0MB)
EFI: mem146: type=4, attr=0xf, range=[0x000000007e78e000-0x000000007e78f000) (0MB)
EFI: mem147: type=3, attr=0xf, range=[0x000000007e78f000-0x000000007e792000) (0MB)
EFI: mem148: type=4, attr=0xf, range=[0x000000007e792000-0x000000007e793000) (0MB)
EFI: mem149: type=3, attr=0xf, range=[0x000000007e793000-0x000000007e798000) (0MB)
EFI: mem150: type=4, attr=0xf, range=[0x000000007e798000-0x000000007e799000) (0MB)
EFI: mem151: type=3, attr=0xf, range=[0x000000007e799000-0x000000007e79d000) (0MB)
EFI: mem152: type=4, attr=0xf, range=[0x000000007e79d000-0x000000007e79f000) (0MB)
EFI: mem153: type=3, attr=0xf, range=[0x000000007e79f000-0x000000007e7a1000) (0MB)
EFI: mem154: type=4, attr=0xf, range=[0x000000007e7a1000-0x000000007e7a4000) (0MB)
EFI: mem155: type=3, attr=0xf, range=[0x000000007e7a4000-0x000000007e7ab000) (0MB)
EFI: mem156: type=4, attr=0xf, range=[0x000000007e7ab000-0x000000007e7ad000) (0MB)
EFI: mem157: type=3, attr=0xf, range=[0x000000007e7ad000-0x000000007e7ae000) (0MB)
EFI: mem158: type=4, attr=0xf, range=[0x000000007e7ae000-0x000000007e83a000) (0MB)
EFI: mem159: type=3, attr=0xf, range=[0x000000007e83a000-0x000000007e83b000) (0MB)
EFI: mem160: type=4, attr=0xf, range=[0x000000007e83b000-0x000000007e8db000) (0MB)
EFI: mem161: type=3, attr=0xf, range=[0x000000007e8db000-0x000000007e8dc000) (0MB)
EFI: mem162: type=4, attr=0xf, range=[0x000000007e8dc000-0x000000007f5ef000) (13MB)
EFI: mem163: type=6, attr=0x800000000000000f, range=[0x000000007f5ef000-0x000000007f5fd000) (0MB)
EFI: mem164: type=6, attr=0x800000000000000f, range=[0x000000007f5fd000-0x000000007f609000) (0MB)
EFI: mem165: type=5, attr=0x800000000000000f, range=[0x000000007f609000-0x000000007f614000) (0MB)
EFI: mem166: type=6, attr=0x800000000000000f, range=[0x000000007f614000-0x000000007f63f000) (0MB)
EFI: mem167: type=5, attr=0x800000000000000f, range=[0x000000007f63f000-0x000000007f68f000) (0MB)
EFI: mem168: type=0, attr=0xf, range=[0x000000007f68f000-0x000000007f6bd000) (0MB)
EFI: mem169: type=0, attr=0xf, range=[0x000000007f6bd000-0x000000007f6df000) (0MB)
EFI: mem170: type=10, attr=0xf, range=[0x000000007f6df000-0x000000007f735000) (0MB)
EFI: mem171: type=10, attr=0xf, range=[0x000000007f735000-0x000000007f7df000) (0MB)
EFI: mem172: type=9, attr=0xf, range=[0x000000007f7df000-0x000000007f7ec000) (0MB)
EFI: mem173: type=9, attr=0xf, range=[0x000000007f7ec000-0x000000007f7ff000) (0MB)
EFI: mem174: type=4, attr=0xf, range=[0x000000007f7ff000-0x000000007f800000) (0MB)
EFI: mem175: type=11, attr=0x8000000000000001, range=[0x00000000ff800000-0x0000000100000000) (8MB)
EFI: mem176: type=7, attr=0xf, range=[0x0000000100000000-0x0000000680000000) (22528MB)
EFI: mem177: type=11, attr=0x8000000000000001, range=[0x0000000080000000-0x0000000090000000) (256MB)
EFI: mem178: type=11, attr=0x8000000000000000, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
DMI 2.5 present.
SMBIOS version 2.5 @ 0x7F6BE000
DMI: IBM IBM System x -[7946AC1]-/49Y6512     , BIOS -[D6E131CUS-1.05]- 11/25/2009
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x680000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 0000000000 mask FF80000000 write-back
  1 base 0100000000 mask FF00000000 write-back
  2 base 0200000000 mask FE00000000 write-back
  3 base 0400000000 mask FC00000000 write-back
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000080000000 - 0000000100000000 (usable) ==> (reserved)
last_pfn = 0x7f800 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007f800000
 0000000000 - 007f800000 page 2M
kernel direct mapping tables up to 7f800000 @ 8000-b000
init_memory_mapping: 0000000100000000-0000000680000000
 0100000000 - 0680000000 page 2M
kernel direct mapping tables up to 680000000 @ 9000-24000
RAMDISK: 79d3f000 - 7adf3dbf
ACPI: RSDP 000000007f7fe014 00024 (v02 IBM   )
ACPI: XSDT 000000007f7fe120 0008C (v01 IBM    THURLEY  00000000      01000013)
ACPI: FACP 000000007f7fb000 000F4 (v04 IBM    THURLEY  00000000 IBM  01000013)
ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-611)
ACPI: DSDT 000000007f7f8000 02772 (v01 IBM    THURLEY  00000003 IBM  01000013)
ACPI: FACS 000000007f735000 00040
ACPI: TCPA 000000007f7fd000 00064 (v00                 00000000      00000000)
ACPI: APIC 000000007f7f7000 000DE (v02 IBM    THURLEY  00000000 IBM  01000013)
ACPI: MCFG 000000007f7f6000 0003C (v01 IBM    THURLEY  00000001 IBM  01000013)
ACPI: SLIC 000000007f7f5000 00176 (v01 IBM    THURLEY  00000000 IBM  01000013)
ACPI: HPET 000000007f7f4000 00038 (v01 IBM    THURLEY  00000001 IBM  01000013)
ACPI: SRAT 000000007f7f3000 001A8 (v02 IBM    THURLEY  00000001 IBM  01000013)
ACPI: SLIT 000000007f7f2000 00030 (v01 IBM    THURLEY  00000000 IBM  01000013)
ACPI: SSDT 000000007f7f1000 00113 (v02 IBM    CPUSCOPE 00004000 IBM  01000013)
ACPI: SSDT 000000007f7ef000 01404 (v02 IBM    PSTATEPM 00004000 IBM  01000013)
ACPI: SSDT 000000007f7ee000 00832 (v02 IBM    CPUCSTAT 00004000 IBM  01000013)
ACPI: ERST 000000007f7ed000 00230 (v01 IBM    THURLEY  00000001 IBM  01000013)
ACPI: DMAR 000000007f7ec000 000C8 (v01 IBM    THURLEY  00000001 IBM  01000013)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 4 -> Node 0
SRAT: PXM 0 -> APIC 6 -> Node 0
SRAT: PXM 1 -> APIC 16 -> Node 1
SRAT: PXM 1 -> APIC 18 -> Node 1
SRAT: PXM 1 -> APIC 20 -> Node 1
SRAT: PXM 1 -> APIC 22 -> Node 1
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: PXM 0 -> APIC 5 -> Node 0
SRAT: PXM 0 -> APIC 7 -> Node 0
SRAT: PXM 1 -> APIC 17 -> Node 1
SRAT: PXM 1 -> APIC 19 -> Node 1
SRAT: PXM 1 -> APIC 21 -> Node 1
SRAT: PXM 1 -> APIC 23 -> Node 1
SRAT: Node 0 PXM 0 0-80000000
SRAT: Node 0 PXM 0 100000000-480000000
SRAT: Node 1 PXM 1 480000000-680000000
NUMA: Using 31 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000480000000
  NODE_DATA [000000000001f000 - 0000000000052fff]
  bootmap [0000000000100000 -  000000000018ffff] pages 90
(10 early reservations) ==> bootmem [0000000000 - 0480000000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 000201faa4]    TEXT DATA BSS ==> [0001000000 - 000201faa4]
  #3 [0079d3f000 - 007adf3dbf]          RAMDISK ==> [0079d3f000 - 007adf3dbf]
  #4 [000009d000 - 0000100000]    BIOS reserved ==> [000009d000 - 0000100000]
  #5 [007c3e4000 - 007c3e6190]       EFI memmap ==> [007c3e4000 - 007c3e6190]
  #6 [0002020000 - 0002020480]              BRK ==> [0002020000 - 0002020480]
  #7 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
  #8 [0000009000 - 000001f000]          PGTABLE ==> [0000009000 - 000001f000]
  #9 [0000001000 - 0000001030]        ACPI SLIT ==> [0000001000 - 0000001030]
Bootmem setup node 1 0000000480000000-0000000680000000
  NODE_DATA [0000000480000040 - 000000048003403f]
  bootmap [0000000480035000 -  0000000480074fff] pages 40
(10 early reservations) ==> bootmem [0480000000 - 0680000000]
  #0 [0000000000 - 0000001000]   BIOS data page
  #1 [0000006000 - 0000008000]       TRAMPOLINE
  #2 [0001000000 - 000201faa4]    TEXT DATA BSS
  #3 [0079d3f000 - 007adf3dbf]          RAMDISK
  #4 [000009d000 - 0000100000]    BIOS reserved
  #5 [007c3e4000 - 007c3e6190]       EFI memmap
  #6 [0002020000 - 0002020480]              BRK
  #7 [0000008000 - 0000009000]          PGTABLE
  #8 [0000009000 - 000001f000]          PGTABLE
  #9 [0000001000 - 0000001030]        ACPI SLIT
 [ffffea0000000000-ffffea000fbfffff] PMD -> [ffff880028600000-ffff8800365fffff] on node 0
 [ffffea000fc00000-ffffea0016bfffff] PMD -> [ffff880480200000-ffff8804871fffff] on node 1
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00680000
Movable zone start PFN for each node
early_node_map[9] active PFN ranges
    0: 0x00000001 -> 0x0000006c
    0: 0x0000006d -> 0x0000009f
    0: 0x00000100 -> 0x0007d4c6
    0: 0x0007d4e8 -> 0x0007d52a
    0: 0x0007d54c -> 0x0007d8ee
    0: 0x0007d99e -> 0x0007f5ef
    0: 0x0007f7ff -> 0x0007f800
    0: 0x00100000 -> 0x00480000
    1: 0x00480000 -> 0x00680000
On node 0 totalpages: 4191385
  DMA zone: 56 pages used for memmap
  DMA zone: 201 pages reserved
  DMA zone: 3740 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 503092 pages, LIFO batch:31
  Normal zone: 50176 pages used for memmap
  Normal zone: 3619840 pages, LIFO batch:31
On node 1 totalpages: 2097152
  Normal zone: 28672 pages used for memmap
  Normal zone: 2068480 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x588
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 16 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000006c000 - 000000000006d000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 000000007d4c6000 - 000000007d4e8000
PM: Registered nosave memory: 000000007d52a000 - 000000007d54c000
PM: Registered nosave memory: 000000007d8ee000 - 000000007d99e000
PM: Registered nosave memory: 000000007f5ef000 - 000000007f6df000
PM: Registered nosave memory: 000000007f6df000 - 000000007f7df000
PM: Registered nosave memory: 000000007f7df000 - 000000007f7ff000
PM: Registered nosave memory: 000000007f800000 - 0000000080000000
PM: Registered nosave memory: 0000000080000000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000ff800000
PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:2
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94872 r8192 d23912 u262144
pcpu-alloc: s94872 r8192 d23912 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 08 09 10 11 [1] 04 05 06 07 12 13 14 15 
Built 2 zonelists in Zone order, mobility grouping on.  Total pages: 6195152
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_vnct13-lv_root rd_LVM_LV=vg_vnct13/lv_root rd_NO_LUKS rd_LVM_LV=vg_vnct13/lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM LANG=en_US.UTF-8 rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 24650440k/27262976k available (5325k kernel code, 2108828k absent, 503708k reserved, 7013k data, 1276k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:944
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 100663296 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2266.823 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4533.64 BogoMIPS (lpj=2266823)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21769 entries in 86 pages
dmar: Host address width 40
dmar: DRHD base: 0x000000fe710000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f020fe
dmar: RMRR base: 0x0000007d910000 end: 0x0000007d98ffff
dmar: ATSR flags: 0x0
IOAPIC id 9 under DRHD base 0xfe710000
IOAPIC id 8 under DRHD base 0xfe710000
Enabled IRQ remapping in xapic mode
APIC routing finalized to physical flat.
  alloc irq_desc for 48 on node 0
  alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU           E5520  @ 2.27GHz stepping 05
Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.
CPU erratum AAJ80 worked around
CPUID marked event: 'bus cycles' unavailable
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node   0, Processors  #1 #2 #3 Ok.
Booting Node   1, Processors  #4 #5 #6 #7 Ok.
Booting Node   0, Processors  #8 #9 #10 #11 Ok.
Booting Node   1, Processors  #12 #13 #14 #15 Ok.
Brought up 16 CPUs
Total of 16 processors activated (72530.59 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 6c000 (4096 bytes)
PM: Registering ACPI NVS region at 9f000 (4096 bytes)
PM: Registering ACPI NVS region at 7f6df000 (1048576 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x90000000-0xfdffffff]
pci_root PNP0A08:00: host bridge window [0x7f00000000-0x7f00000000] (ignored, not CPU addressable)
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfdffffff]
[Hardware Error]: This system BIOS has enabled interrupt remapping
on a chipset that contains an errata making that
feature unstable.  Please reboot with intremap=off
added to the kernel command line and contact
your BIOS vendor for an update
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0x97c00000-0x97c03fff 64bit]
pci 0000:00:16.1: reg 10: [mem 0x97c04000-0x97c07fff 64bit]
pci 0000:00:16.2: reg 10: [mem 0x97c08000-0x97c0bfff 64bit]
pci 0000:00:16.3: reg 10: [mem 0x97c0c000-0x97c0ffff 64bit]
pci 0000:00:16.4: reg 10: [mem 0x97c10000-0x97c13fff 64bit]
pci 0000:00:16.5: reg 10: [mem 0x97c14000-0x97c17fff 64bit]
pci 0000:00:16.6: reg 10: [mem 0x97c18000-0x97c1bfff 64bit]
pci 0000:00:16.7: reg 10: [mem 0x97c1c000-0x97c1ffff 64bit]
pci 0000:00:1a.0: reg 20: [io  0x40a0-0x40bf]
pci 0000:00:1a.1: reg 20: [io  0x4080-0x409f]
pci 0000:00:1a.7: reg 10: [mem 0x97c21400-0x97c217ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x4060-0x407f]
pci 0000:00:1d.1: reg 20: [io  0x4040-0x405f]
pci 0000:00:1d.2: reg 20: [io  0x4020-0x403f]
pci 0000:00:1d.7: reg 10: [mem 0x97c21000-0x97c213ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0x4118-0x411f]
pci 0000:00:1f.2: reg 14: [io  0x412c-0x412f]
pci 0000:00:1f.2: reg 18: [io  0x4110-0x4117]
pci 0000:00:1f.2: reg 1c: [io  0x4128-0x412b]
pci 0000:00:1f.2: reg 20: [io  0x40f0-0x40ff]
pci 0000:00:1f.2: reg 24: [io  0x40e0-0x40ef]
pci 0000:00:1f.3: reg 10: [mem 0x97c21800-0x97c218ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x4000-0x401f]
pci 0000:00:1f.5: reg 10: [io  0x4108-0x410f]
pci 0000:00:1f.5: reg 14: [io  0x4124-0x4127]
pci 0000:00:1f.5: reg 18: [io  0x4100-0x4107]
pci 0000:00:1f.5: reg 1c: [io  0x4120-0x4123]
pci 0000:00:1f.5: reg 20: [io  0x40d0-0x40df]
pci 0000:00:1f.5: reg 24: [io  0x40c0-0x40cf]
pci 0000:0b:00.0: reg 10: [mem 0x92000000-0x93ffffff 64bit]
pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.0: PME# disabled
pci 0000:0b:00.1: reg 10: [mem 0x94000000-0x95ffffff 64bit]
pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold
pci 0000:0b:00.1: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 0b-0f]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0x92000000-0x95ffffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:02.0: PCI bridge to [bus 10-14]
pci 0000:00:02.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:02.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:02.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:15:00.0: reg 10: [mem 0x97b60000-0x97b7ffff]
pci 0000:15:00.0: reg 14: [mem 0x97b40000-0x97b5ffff]
pci 0000:15:00.0: reg 18: [io  0x3020-0x303f]
pci 0000:15:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:15:00.0: PME# supported from D0 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:15:00.1: reg 10: [mem 0x97b20000-0x97b3ffff]
pci 0000:15:00.1: reg 14: [mem 0x97b00000-0x97b1ffff]
pci 0000:15:00.1: reg 18: [io  0x3000-0x301f]
pci 0000:15:00.1: PME# supported from D0 D3hot D3cold
pci 0000:15:00.1: PME# disabled
pci 0000:00:03.0: PCI bridge to [bus 15-19]
pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:03.0:   bridge window [mem 0x97b00000-0x97bfffff]
pci 0000:00:03.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:1a:00.0: reg 10: [mem 0x97a60000-0x97a7ffff]
pci 0000:1a:00.0: reg 14: [mem 0x97a40000-0x97a5ffff]
pci 0000:1a:00.0: reg 18: [io  0x2020-0x203f]
pci 0000:1a:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:1a:00.0: PME# supported from D0 D3hot D3cold
pci 0000:1a:00.0: PME# disabled
pci 0000:1a:00.1: reg 10: [mem 0x97a20000-0x97a3ffff]
pci 0000:1a:00.1: reg 14: [mem 0x97a00000-0x97a1ffff]
pci 0000:1a:00.1: reg 18: [io  0x2000-0x201f]
pci 0000:1a:00.1: PME# supported from D0 D3hot D3cold
pci 0000:1a:00.1: PME# disabled
pci 0000:00:07.0: PCI bridge to [bus 1a-1e]
pci 0000:00:07.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:07.0:   bridge window [mem 0x97a00000-0x97afffff]
pci 0000:00:07.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:01:00.0: reg 10: [io  0x1000-0x10ff]
pci 0000:01:00.0: reg 14: [mem 0x97910000-0x97913fff 64bit]
pci 0000:01:00.0: reg 1c: [mem 0x97900000-0x9790ffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xffe00000-0xffffffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x97900000-0x979fffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
pci 0000:00:1c.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.4:   bridge window [mem 0x97000000-0x978fffff]
pci 0000:00:1c.4:   bridge window [mem 0x96000000-0x96ffffff 64bit pref]
pci 0000:07:00.0: reg 10: [mem 0x96000000-0x96ffffff pref]
pci 0000:07:00.0: reg 14: [mem 0x97800000-0x97803fff]
pci 0000:07:00.0: reg 18: [mem 0x97000000-0x977fffff]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:06:00.0:   bridge window [mem 0x97000000-0x978fffff]
pci 0000:06:00.0:   bridge window [mem 0x96000000-0x96ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 1f-23] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x90000000-0xfdffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
Firmware did not grant requested _OSC control
Unable to assume _OSC PCIe control. Disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
lo: Dropping TSO features since no CSUM feature.
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io  0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io  0x0000-0x001f]
pnp 00:01: [io  0x0080-0x0091]
pnp 00:01: [io  0x0093-0x009f]
pnp 00:01: [io  0x00c0-0x00df]
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: [io  0x0070-0x0077]
pnp 00:02: [irq 8]
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: [io  0x00f0]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io  0x0061]
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: [mem 0xfed00000-0xfed003ff]
pnp 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:06: [io  0x004e-0x004f]
pnp 00:06: [io  0x0060]
pnp 00:06: [io  0x0062-0x0066]
pnp 00:06: [io  0x0070]
pnp 00:06: [io  0x0092]
pnp 00:06: [io  0x00b2-0x00b3]
pnp 00:06: [io  0x0400-0x043f]
pnp 00:06: [io  0x0440-0x045f]
pnp 00:06: [io  0x0460-0x047f]
pnp 00:06: [io  0x0580-0x05ff]
pnp 00:06: [io  0x05e0-0x05ff]
pnp 00:06: [io  0x0cf9]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [io  0x03f8-0x03ff]
pnp 00:07: [irq 4]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: [io  0x02f8-0x02ff]
pnp 00:08: [irq 3]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [mem 0xfed40000-0xfed44fff]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c31 (active)
pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0a: [mem 0xfec00000-0xfecfffff]
pnp 00:0a: [mem 0xfee00000-0xfeefffff]
pnp 00:0a: [mem 0x80000000-0x8fffffff]
pnp 00:0a: [mem 0xffc00000-0xffffffff]
pnp 00:0a: [mem 0xfeb00000-0xfebfffff]
pnp 00:0a: [mem 0xfe710000-0xfe711fff]
pnp 00:0a: [mem 0xfe800000-0xfe9fffff]
pnp 00:0a: [mem 0xfc000000-0xfcffffff]
pnp 00:0a: [mem 0xfea00000-0xfeafffff]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0b: [io  0x0ca0-0x0ca1]
pnp 00:0b: [io  0x0ca4-0x0ca9]
pnp 00:0b: [io  0x0caa-0x0cab]
pnp 00:0b: [io  0x0cac-0x0ccb]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: [io  0x0ca2]
pnp 00:0c: [io  0x0ca3]
pnp 00:0c: Plug and Play ACPI device, IDs IPI0001 PNP0c02 (active)
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: [io  0x0400-0x043f] has been reserved
system 00:06: [io  0x0440-0x045f] has been reserved
system 00:06: [io  0x0460-0x047f] has been reserved
system 00:06: [io  0x0580-0x05ff] has been reserved
system 00:06: [io  0x05e0-0x05ff] has been reserved
system 00:06: [io  0x0cf9] could not be reserved
system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0a: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0a: [mem 0x80000000-0x8fffffff] has been reserved
system 00:0a: [mem 0xffc00000-0xffffffff] has been reserved
system 00:0a: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:0a: [mem 0xfe710000-0xfe711fff] could not be reserved
system 00:0a: [mem 0xfe800000-0xfe9fffff] has been reserved
system 00:0a: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:0a: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:0b: [io  0x0ca0-0x0ca1] has been reserved
system 00:0b: [io  0x0ca4-0x0ca9] has been reserved
system 00:0b: [io  0x0caa-0x0cab] has been reserved
system 00:0b: [io  0x0cac-0x0ccb] has been reserved
system 00:0c: [io  0x0ca2] has been reserved
system 00:0c: [io  0x0ca3] has been reserved
pci 0000:15:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:1a:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: no compatible bridge window for [mem 0xffe00000-0xffffffff pref]
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1c.0: BAR 15: assigned [mem 0x90000000-0x901fffff pref]
pci 0000:00:03.0: BAR 15: assigned [mem 0x90200000-0x902fffff pref]
pci 0000:00:07.0: BAR 15: assigned [mem 0x90300000-0x903fffff pref]
pci 0000:00:1c.4: BAR 13: assigned [io  0x5000-0x5fff]
pci 0000:00:01.0: PCI bridge to [bus 0b-0f]
pci 0000:00:01.0: PCI bridge to [bus 0b-0f]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0x92000000-0x95ffffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:02.0: PCI bridge to [bus 10-14]
pci 0000:00:02.0: PCI bridge to [bus 10-14]
pci 0000:00:02.0:   bridge window [io  disabled]
pci 0000:00:02.0:   bridge window [mem disabled]
pci 0000:00:02.0:   bridge window [mem pref disabled]
pci 0000:15:00.0: BAR 6: assigned [mem 0x90200000-0x9021ffff pref]
pci 0000:00:03.0: PCI bridge to [bus 15-19]
pci 0000:00:03.0: PCI bridge to [bus 15-19]
pci 0000:00:03.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:03.0:   bridge window [mem 0x97b00000-0x97bfffff]
pci 0000:00:03.0:   bridge window [mem 0x90200000-0x902fffff pref]
pci 0000:1a:00.0: BAR 6: assigned [mem 0x90300000-0x9031ffff pref]
pci 0000:00:07.0: PCI bridge to [bus 1a-1e]
pci 0000:00:07.0: PCI bridge to [bus 1a-1e]
pci 0000:00:07.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:07.0:   bridge window [mem 0x97a00000-0x97afffff]
pci 0000:00:07.0:   bridge window [mem 0x90300000-0x903fffff pref]
pci 0000:01:00.0: BAR 6: assigned [mem 0x90000000-0x901fffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0: PCI bridge to [bus 01-05]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0x97900000-0x979fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x901fffff pref]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0: PCI bridge to [bus 07-07]
pci 0000:06:00.0:   bridge window [io  disabled]
pci 0000:06:00.0:   bridge window [mem 0x97000000-0x978fffff]
pci 0000:06:00.0:   bridge window [mem 0x96000000-0x96ffffff pref]
pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
pci 0000:00:1c.4: PCI bridge to [bus 06-0a]
pci 0000:00:1c.4:   bridge window [io  0x5000-0x5fff]
pci 0000:00:1c.4:   bridge window [mem 0x97000000-0x978fffff]
pci 0000:00:1c.4:   bridge window [mem 0x96000000-0x96ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 1f-23]
pci 0000:00:1e.0: PCI bridge to [bus 1f-23]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
pci 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
pci 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
pci 0000:00:03.0: setting latency timer to 64
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
pci 0000:00:07.0: setting latency timer to 64
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:06:00.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfdffffff]
pci_bus 0000:0b: resource 1 [mem 0x92000000-0x95ffffff]
pci_bus 0000:15: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:15: resource 1 [mem 0x97b00000-0x97bfffff]
pci_bus 0000:15: resource 2 [mem 0x90200000-0x902fffff pref]
pci_bus 0000:1a: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:1a: resource 1 [mem 0x97a00000-0x97afffff]
pci_bus 0000:1a: resource 2 [mem 0x90300000-0x903fffff pref]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0x97900000-0x979fffff]
pci_bus 0000:01: resource 2 [mem 0x90000000-0x901fffff pref]
pci_bus 0000:06: resource 0 [io  0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0x97000000-0x978fffff]
pci_bus 0000:06: resource 2 [mem 0x96000000-0x96ffffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0x97000000-0x978fffff]
pci_bus 0000:07: resource 2 [mem 0x96000000-0x96ffffff pref]
pci_bus 0000:1f: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:1f: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:1f: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:1f: resource 7 [mem 0x90000000-0xfdffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1a.0: PCI INT A disabled
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.1: PCI INT B disabled
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1d.0: PCI INT A disabled
pci 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1d.7: PCI INT A disabled
pci 0000:07:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17107k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1464702940.688:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 888FF77922D7D6E1
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 49 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.0: irq 49 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
  alloc irq_desc for 50 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
pcieport 0000:00:1c.4: irq 50 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
efifb: probing for efifb
efifb: framebuffer at 0x96000000, mapped to 0xffffc90024700000, using 8192k, total 8192k
efifb: mode is 1280x1024x32, linelength=5120, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 160x64
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1A
intel_idle: lapic_timer_reliable_states 0x2
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
ipmi_si ipmi_si.0: Found new BMC (man_id: 0x000002, prod_id: 0x00dc, dev_id: 0x20)
ipmi_si ipmi_si.0: IPMI kcs interface initialized
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle yielding to intel_idleACPI Exception: AE_NOT_FOUND, No or invalid critical threshold (20090903/thermal-386)
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
tpm_tis 00:09: 1.2 TPM (device-id 0xFE, rev-id 70)
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0x97c21400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 17, io mem 0x97c21000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-431.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 17, io base 0x000040a0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 18, io base 0x00004080
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 17, io base 0x00004060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00004040
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 19, io base 0x00004020
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-431.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PNP: No PS/2 controller found. Probing ports directly.
Refined TSC clocksource calibration: 2266.746 MHz.
Switching to clocksource tsc
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usb 5-2: new full speed USB device number 2 using uhci_hcd
usb 5-2: New USB device found, idVendor=04b3, idProduct=4010
usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-2: Product: RNDIS/CDC ETHER
usb 5-2: Manufacturer: IBM
usb 5-2: configuration #1 chosen from 2 choices
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:02: setting system clock to 2016-05-31 13:55:43 UTC (1464702943)
Initalizing network drop monitor service
Freeing unused kernel memory: 1276k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 800k freed
Freeing unused kernel memory: 1588k freed
dracut: dracut-004-335.el6
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.24.6-ioctl (2013-01-15) initialised: dm-devel@redhat.com
usb 7-2: new low speed USB device number 2 using uhci_hcd
udev: starting version 147
usb 7-2: New USB device found, idVendor=0624, idProduct=0296
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: IBM 73P5832
usb 7-2: Manufacturer: Avocent
usb 7-2: configuration #1 chosen from 1 choice
input: Avocent IBM 73P5832 as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.0/input/input2
generic-usb 0003:0624:0296.0001: input,hidraw0: USB HID v1.10 Keyboard [Avocent IBM 73P5832] on usb-0000:00:1d.2-2/input0
dracut: Starting plymouth daemon
input: Avocent IBM 73P5832 as /devices/pci0000:00/0000:00:1d.2/usb7/7-2/7-2:1.1/input/input3
generic-usb 0003:0624:0296.0002: input,hidraw1: USB HID v1.10 Mouse [Avocent IBM 73P5832] on usb-0000:00:1d.2-2/input1
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SAS Host driver 3.04.20
mptsas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068E B3: Capabilities={Initiator}
mptsas 0000:01:00.0: setting latency timer to 64
scsi0 : ioc0: LSISAS1068E B3, FwRev=011b5800h, Ports=1, MaxQ=277, IRQ=16
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 5, phy 0, sas_addr 0x5000c5001ccfeac9
scsi 0:0:0:0: Direct-Access     IBM-ESXS ST973452SS       B624 PQ: 0 ANSI: 5
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 4, phy 1, sas_addr 0x5000c5001ccd4a59
scsi 0:0:1:0: Direct-Access     IBM-ESXS ST973452SS       B624 PQ: 0 ANSI: 5
mptsas: ioc0: attaching raid volume, channel 1, id 1
scsi 0:1:1:0: Direct-Access     LSILOGIC Logical Volume   3000 PQ: 0 ANSI: 2
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0x4118 ctl 0x412c bmdma 0x40f0 irq 16
ata2: SATA max UDMA/133 cmd 0x4110 ctl 0x4128 bmdma 0x40f8 irq 16
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ata_piix 0000:00:1f.5: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata3: SATA max UDMA/133 cmd 0x4108 ctl 0x4124 bmdma 0x40d0 irq 21
ata4: SATA max UDMA/133 cmd 0x4100 ctl 0x4120 bmdma 0x40d8 irq 21
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.01: link offline, clearing class 3 to NONE
ata1.00: ATAPI: UJDA782 DVD/CDRW, VA13, max UDMA/33
ata1.00: configured for UDMA/33
scsi 1:0:0:0: CD-ROM            MATSHITA UJDA782 DVD/CDRW VA13 PQ: 0 ANSI: 5
sd 0:1:1:0: [sda] 281247744 512-byte logical blocks: (143 GB/134 GiB)
sd 0:1:1:0: [sda] Write Protect is off
sd 0:1:1:0: [sda] Mode Sense: 03 00 00 08
sd 0:1:1:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:1:1:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda3  for LVM logical volumes vg_vnct13/lv_root vg_vnct13/lv_swap 
dracut: inactive '/dev/vg_vnct13/lv_root' [132.45 GiB] inherit
dracut: inactive '/dev/vg_vnct13/lv_swap' [1000.00 MiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: 
dracut: Mounted root filesystem /dev/mapper/vg_vnct13-lv_root
dracut: Loading SELinux policy
type=1404 audit(1464702960.492:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux: 2048 avtab hash slots, 277800 rules.
SELinux:  9 users, 12 roles, 3917 types, 217 bools, 1 sens, 1024 cats
SELinux:  81 classes, 277800 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1464702960.985:3): policy loaded auid=4294967295 ses=4294967295
dracut: 
dracut: Switching root
udev: starting version 147
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 2.1.0 Nov 10 2013
dca service started, version 1.12.1
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:16.0: enabling device (0000 -> 0002)
ioatdma 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ioatdma 0000:00:16.0: setting latency timer to 64
  alloc irq_desc for 51 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.0: irq 51 for MSI/MSI-X
ioatdma 0000:00:16.1: enabling device (0000 -> 0002)
ioatdma 0000:00:16.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ioatdma 0000:00:16.1: setting latency timer to 64
  alloc irq_desc for 52 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.1: irq 52 for MSI/MSI-X
ioatdma 0000:00:16.2: enabling device (0000 -> 0002)
ioatdma 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ioatdma 0000:00:16.2: setting latency timer to 64
  alloc irq_desc for 53 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.2: irq 53 for MSI/MSI-X
ioatdma 0000:00:16.3: enabling device (0000 -> 0002)
ioatdma 0000:00:16.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ioatdma 0000:00:16.3: setting latency timer to 64
  alloc irq_desc for 54 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.3: irq 54 for MSI/MSI-X
ioatdma 0000:00:16.4: enabling device (0000 -> 0002)
ioatdma 0000:00:16.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ioatdma 0000:00:16.4: setting latency timer to 64
  alloc irq_desc for 55 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.4: irq 55 for MSI/MSI-X
ioatdma 0000:00:16.5: enabling device (0000 -> 0002)
ioatdma 0000:00:16.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ioatdma 0000:00:16.5: setting latency timer to 64
  alloc irq_desc for 56 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.5: irq 56 for MSI/MSI-X
ioatdma 0000:00:16.6: enabling device (0000 -> 0002)
ioatdma 0000:00:16.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ioatdma 0000:00:16.6: setting latency timer to 64
  alloc irq_desc for 57 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.6: irq 57 for MSI/MSI-X
ioatdma 0000:00:16.7: enabling device (0000 -> 0002)
ioatdma 0000:00:16.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ioatdma 0000:00:16.7: setting latency timer to 64
  alloc irq_desc for 58 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
ioatdma 0000:00:16.7: irq 58 for MSI/MSI-X
i801_smbus 0000:00:1f.3: enabling device (0140 -> 0143)
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
cdc_ether 5-2:1.0: usb0: register 'cdc_ether' at usb-0000:00:1d.0-2, CDC Ethernet Device, e6:1f:13:2b:ad:07
usbcore: registered new interface driver cdc_ether
scsi 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:1:0: Attached scsi generic sg1 type 0
sd 0:1:1:0: Attached scsi generic sg2 type 0
sr 1:0:0:0: Attached scsi generic sg3 type 5
bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.2.3 (June 27, 2012)
bnx2 0000:0b:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
bnx2 0000:0b:00.0: setting latency timer to 64
bnx2 0000:0b:00.0: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:0b:00.0: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:0b:00.0: eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 92000000, IRQ 28, node addr e4:1f:13:32:5d:04
  alloc irq_desc for 40 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
bnx2 0000:0b:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40
bnx2 0000:0b:00.1: setting latency timer to 64
bnx2 0000:0b:00.1: firmware: requesting bnx2/bnx2-mips-09-6.2.1b.fw
bnx2 0000:0b:00.1: firmware: requesting bnx2/bnx2-rv2p-09-6.0.17.fw
bnx2 0000:0b:00.1: eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 94000000, IRQ 40, node addr e4:1f:13:32:5d:06
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:15:00.0: enabling device (0040 -> 0042)
e1000e 0000:15:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
e1000e 0000:15:00.0: setting latency timer to 64
e1000e 0000:15:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  alloc irq_desc for 59 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:15:00.0: irq 59 for MSI/MSI-X
e1000e 0000:15:00.0: eth2: (PCI Express:2.5GT/s:Width x4) 00:15:17:d1:27:44
e1000e 0000:15:00.0: eth2: Intel(R) PRO/1000 Network Connection
e1000e 0000:15:00.0: eth2: MAC: 0, PHY: 4, PBA No: D56146-003
e1000e 0000:15:00.1: enabling device (0040 -> 0042)
  alloc irq_desc for 34 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:15:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34
e1000e 0000:15:00.1: setting latency timer to 64
e1000e 0000:15:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  alloc irq_desc for 60 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:15:00.1: irq 60 for MSI/MSI-X
e1000e 0000:15:00.1: eth3: (PCI Express:2.5GT/s:Width x4) 00:15:17:d1:27:45
e1000e 0000:15:00.1: eth3: Intel(R) PRO/1000 Network Connection
e1000e 0000:15:00.1: eth3: MAC: 0, PHY: 4, PBA No: D56146-003
e1000e 0000:1a:00.0: enabling device (0040 -> 0042)
e1000e 0000:1a:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30
e1000e 0000:1a:00.0: setting latency timer to 64
e1000e 0000:1a:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  alloc irq_desc for 61 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:1a:00.0: irq 61 for MSI/MSI-X
e1000e 0000:1a:00.0: eth4: (PCI Express:2.5GT/s:Width x4) 00:15:17:d1:27:8c
e1000e 0000:1a:00.0: eth4: Intel(R) PRO/1000 Network Connection
e1000e 0000:1a:00.0: eth4: MAC: 0, PHY: 4, PBA No: D56146-003
e1000e 0000:1a:00.1: enabling device (0040 -> 0042)
  alloc irq_desc for 37 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:1a:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37
e1000e 0000:1a:00.1: setting latency timer to 64
e1000e 0000:1a:00.1: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
  alloc irq_desc for 62 on node -1
  alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
e1000e 0000:1a:00.1: irq 62 for MSI/MSI-X
e1000e 0000:1a:00.1: eth5: (PCI Express:2.5GT/s:Width x4) 00:15:17:d1:27:8d
e1000e 0000:1a:00.1: eth5: Intel(R) PRO/1000 Network Connection
e1000e 0000:1a:00.1: eth5: MAC: 0, PHY: 4, PBA No: D56146-003
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x05e0)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
microcode: CPU0 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU1 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU2 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU3 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU4 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU5 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU6 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU7 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU8 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU9 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU10 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU11 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU12 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU13 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU14 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
microcode: CPU15 sig=0x106a5, pf=0x1, revision=0x11
platform microcode: firmware: requesting intel-ucode/06-1a-05
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
microcode: CPU0 updated to revision 0x19, date = 2013-06-21 
microcode: CPU1 updated to revision 0x19, date = 2013-06-21 
microcode: CPU2 updated to revision 0x19, date = 2013-06-21 
microcode: CPU3 updated to revision 0x19, date = 2013-06-21 
microcode: CPU4 updated to revision 0x19, date = 2013-06-21 
microcode: CPU5 updated to revision 0x19, date = 2013-06-21 
microcode: CPU6 updated to revision 0x19, date = 2013-06-21 
microcode: CPU7 updated to revision 0x19, date = 2013-06-21 
microcode: CPU8 updated to revision 0x19, date = 2013-06-21 
microcode: CPU9 updated to revision 0x19, date = 2013-06-21 
microcode: CPU10 updated to revision 0x19, date = 2013-06-21 
microcode: CPU11 updated to revision 0x19, date = 2013-06-21 
microcode: CPU12 updated to revision 0x19, date = 2013-06-21 
microcode: CPU13 updated to revision 0x19, date = 2013-06-21 
microcode: CPU14 updated to revision 0x19, date = 2013-06-21 
microcode: CPU15 updated to revision 0x19, date = 2013-06-21 
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
SELinux: initialized (dev sda2, type ext4), uses xattr
SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
Adding 1023992k swap on /dev/mapper/vg_vnct13-lv_swap.  Priority:-1 extents:1 across:1023992k 
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
