# Invocation command line: # /tmp/spec/1.2/bin/runspec --config=/tmp/spec/1.2/config/k80-omp.cfg --flagsurl=file://bigdata/rz/kroh21/SPEC/ACCEL/run/gcc62_ocl_flags.xml --tune=base --reportable openmp # output_root was not used for this run ############################################################################ # Invocation command line: # /home/junjie/spec/accel-test/75/bin/runspec -c omp-intel --reportable openmp --output_format raw,pdf,txt # output_root was not used for this run ############################################################################ # This is a sample OpenACC config file. It was tested with: # # Compiler name/version: PGI 13.9 # Operating system version: 64-bit Linux # CPU: x86_64 Based Systems # Accelerator: NVIDIA Tesla M2090 # Driver: NVIDIA UNIX x86_64 Kernel Module 319.49 # # If your platform uses different versions, different # hardware or operates in a different mode (for # example, 32- vs. 64-bit mode), there is the possibiliy # that this configuration file may not work as-is. # # Note that issues with compilation should be directed # to the compiler vendor. Information about SPEC techncial # support can be found in the techsupport document in the # Docs directory of your benchmark installation. # # Also note that this is a sample configuration. It # is expected to work for the environment in which # it was tested; it is not guaranteed that this is # the config file that will provide the best performance. # #################################################################### # Tester information #################################################################### l# System Description hw_model = Intel Xeon(R) CPU E5-2630-v3 + NVIDIA Tesla K80 hw_memory000 = 256 GB () hw_disk = 44 GB SSD hw_vendor = Bull hw_avail = Sept-2013 # CPU description hw_cpu = Intel Xeon(R) CPU E5-2630-v3 @ 2.40GHz hw_cpu_char000 = Intel Turbo Boost Technology up tp 3.20 GHz hw_cpu_char001 = AVX clock: 2100 MHz hw_cpu_mhz = 2400 hw_cpu_max_mhz = 2400 hw_nchips = 2 hw_ncores = 16 hw_ncoresperchip = 8 hw_nthreadspercore = 2 hw_ncpuorder = 1,2 chips hw_fpu = Integrated hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None #################################################################### # Accelerator Hardware information #################################################################### hw_accel_model = Intel Xeon(R) CPU E5-2630-v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon(R) CPU E5-2630-v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes hw_accel_desc= Intel Xeon(R) CPU E5-2630-v3 @ 2.40GHz # Tester description - edit the date, put your license number here! #################################################################### # Tester information #################################################################### tester = HZDR test_sponsor = HZDR license_num = 65A prepared_by = #display_order = 1a # Operating system, file system sw_os000 = Ubuntu 14.04 LTS sw_os001 = Kernel 4.4.0-38-generic sw_file = ext3 sw_accel_driver = sw_other = sw_avail = Mar-2015 sw_state = Run Level 3 (Multi-User) sw_base_ptrsize = 64-bit ext = intel-omp output_format = asc,pdf,raw,txt,config #table = 0 teeout = no teerunout = yes tune = base,peak env_vars = 1 openmp=default=default: CC = icc CXX = icpc FC = ifort ENV_KMP_LIBRARY=turnaround ENV_KMP_BLOCKTIME=infinite ENV_OMP_DYNAMIC=FALSE ENV_KMP_AFFINITY=compact,0 ENV_OMP_NUM_THREADS=32 ENV_KMP_HW_SUBSET=2S,8C,2T ENV_FORT_BUFFERED=true openmp=base=default=default: OPTIMIZE = -O3 -qopenmp -qopenmp-offload=host -xHost PORTABILITY = -DSPEC_USE_INNER_SIMD 550.pmd=default=default=default: FPORTABILITY = -80 559.pmniGhost=default=default=default: FPORTABILITY = -nofor-main 503.postencil=peak=default=default: basepeak = yes 504.polbm=peak=default=default: ENV_OMP_NUM_THREADS=64 ENV_KMP_HW_SUBSET=2S,16C,2T 514.pomriq=peak=default=default: basepeak = yes 550.pmd=peak=default=default: OPTIMIZE += -qopt-prefetch=2 551.ppalm=peak=default=default: ENV_OMP_NUM_THREADS=36 ENV_KMP_HW_SUBSET=2S,18C,1T OPTIMIZE += -I/home/abobyr/FFTW-3.3.6/include LIBS += -L/home/abobyr/FFTW-3.3.6/lib -lfftw3 PORTABILITY+= -DSPEC_HOST_FFTW3 FPORTABILITY+= -DSPEC_HOST_FFTW3 552.pep=peak=default=default: OPTIMIZE += -qopt-streaming-stores always 553.pclvrleaf=peak=default=default: basepeak = yes 554.pcg=peak=default=default: OPTIMIZE += -qopt-prefetch=5 555.pseismic=peak=default=default: basepeak = yes 556.psp=peak=default=default: basepeak = yes 557.pcsp=peak=default=default: basepeak = yes 559.pmniGhost=peak=default=default: basepeak = yes 560.pilbdc=peak=default=default: basepeak = yes 563.pswim=peak=default=default: basepeak = yes 570.pbt=peak=default=default: basepeak = yes # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul 5 11:51:03 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 32 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264058960 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = Ubuntu 14.04.5 LTS notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = debian_version: jessie/sid notes_plat_sysinfo_155 = os-release: notes_plat_sysinfo_160 = NAME="Ubuntu" notes_plat_sysinfo_165 = VERSION="14.04.5 LTS, Trusty Tahr" notes_plat_sysinfo_170 = ID=ubuntu notes_plat_sysinfo_175 = ID_LIKE=debian notes_plat_sysinfo_180 = PRETTY_NAME="Ubuntu 14.04.5 LTS" notes_plat_sysinfo_185 = VERSION_ID="14.04" notes_plat_sysinfo_190 = HOME_URL="http://www.ubuntu.com/" notes_plat_sysinfo_195 = SUPPORT_URL="http://help.ubuntu.com/" notes_plat_sysinfo_200 = rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = uname -a: notes_plat_sysinfo_215 = Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6 notes_plat_sysinfo_220 = 17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14 notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2 notes_plat_sysinfo_245 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_250 = /dev/sda1 ext3 44G 19G 24G 44% / notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2630 v3 hw_disk = 44 GB add more disk info here hw_memory001 = 251.826 GB fixme: If using DDR3, format is: hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' hw_nchips = 2 prepared_by = kroh21 (is never output, only tags rawfile) sw_file = ext3 sw_os001 = Ubuntu 14.04.5 LTS sw_os002 = 4.4.0-38-generic sw_state = Run level 5 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = file://bigdata/rz/kroh21/SPEC/ACCEL/run/gcc62_ocl_flags.xml sw_peak_ptrsize = Not Applicable # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = file://bigdata/rz/kroh21/SPEC/ACCEL/run/Intel-icc17.0-linux64.xml hw_cpu_name = Intel Xeon E5-2630 v3 hw_cpu_mhz = 2400 hw_cpu_max_mhz = 2400 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_disk = 128 GB Samsung SSD 850 PRO hw_accel_model = Intel Xeon CPU E5-2630-v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon CPU E5-2630-v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_compiler = C/C++/Fortran: Version 17.2 of the Intel Compiler sw_file = ext3 sw_state = Run level 5 (user-level) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable hw_accel_desc000 = Intel Xeon CPU E5-2630-v3 @ 2.40GHz hw_accel_desc001 = Turbo ON, SMT ON test_sponsor = HZDR license_num = 65A tester = HZDR hw_avail = Sep-2013 sw_avail = Mar-2015 prepared_by = kroh21 (is never output, only tags rawfile) hw_vendor = Asus hw_model = ASUS ESC4000 G3 Series hw_nthreadspercore = 2 hw_ncoresperchip = 8 hw_ncores = 16 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology up tp 3.20 GHz hw_cpu_char001 = AVX clock: 2100 MHz hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-17000R-15, ECC, hw_memory001 = running at 1866 MHz) sw_os000 = Ubuntu 14.04.5 LTS sw_os001 = 4.4.0-38-generic notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul 5 11:51:03 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 32 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264058960 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = Ubuntu 14.04.5 LTS notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = debian_version: jessie/sid notes_plat_sysinfo_155 = os-release: notes_plat_sysinfo_160 = NAME="Ubuntu" notes_plat_sysinfo_165 = VERSION="14.04.5 LTS, Trusty Tahr" notes_plat_sysinfo_170 = ID=ubuntu notes_plat_sysinfo_175 = ID_LIKE=debian notes_plat_sysinfo_180 = PRETTY_NAME="Ubuntu 14.04.5 LTS" notes_plat_sysinfo_185 = VERSION_ID="14.04" notes_plat_sysinfo_190 = HOME_URL="http://www.ubuntu.com/" notes_plat_sysinfo_195 = SUPPORT_URL="http://help.ubuntu.com/" notes_plat_sysinfo_200 = rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = uname -a: notes_plat_sysinfo_215 = Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6 notes_plat_sysinfo_220 = 17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14 notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2 notes_plat_sysinfo_245 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_250 = /dev/sda1 ext3 44G 19G 24G 44% / notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = file://bigdata/rz/kroh21/SPEC/ACCEL/run/Intel-icc17.0-linux64.xml hw_cpu_name = Intel Xeon E5-2630 v3 hw_cpu_mhz = 2400 hw_cpu_max_mhz = 2400 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_disk = 128 GB Samsung SSD 850 PRO hw_accel_model = Intel Xeon CPU E5-2630-v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon CPU E5-2630-v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_compiler = C/C++/Fortran: Version 17.2 of the Intel Compiler sw_file = ext3 sw_state = Run level 5 (user-level) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable hw_accel_desc000 = Intel Xeon CPU E5-2630-v3 @ 2.40GHz hw_accel_desc001 = Turbo ON, SMT ON test_sponsor = HZDR license_num = 65A tester = HZDR hw_avail = Sep-2013 sw_avail = Mar-2015 prepared_by = kroh21 (is never output, only tags rawfile) hw_vendor = Asus hw_model = ASUS ESC4000 G3 Series hw_nthreadspercore = 2 hw_ncoresperchip = 8 hw_ncores = 16 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology up tp 3.20 GHz hw_cpu_char001 = AVX clock: 2100 MHz hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-17000R-15, ECC, hw_memory001 = running at 1866 MHz) sw_os000 = Ubuntu 14.04.5 LTS sw_os001 = 4.4.0-38-generic notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul 5 11:51:03 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 32 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264058960 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = Ubuntu 14.04.5 LTS notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = debian_version: jessie/sid notes_plat_sysinfo_155 = os-release: notes_plat_sysinfo_160 = NAME="Ubuntu" notes_plat_sysinfo_165 = VERSION="14.04.5 LTS, Trusty Tahr" notes_plat_sysinfo_170 = ID=ubuntu notes_plat_sysinfo_175 = ID_LIKE=debian notes_plat_sysinfo_180 = PRETTY_NAME="Ubuntu 14.04.5 LTS" notes_plat_sysinfo_185 = VERSION_ID="14.04" notes_plat_sysinfo_190 = HOME_URL="http://www.ubuntu.com/" notes_plat_sysinfo_195 = SUPPORT_URL="http://help.ubuntu.com/" notes_plat_sysinfo_200 = rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = uname -a: notes_plat_sysinfo_215 = Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6 notes_plat_sysinfo_220 = 17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14 notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2 notes_plat_sysinfo_245 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_250 = /dev/sda1 ext3 44G 19G 24G 44% / notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = file://bigdata/rz/kroh21/SPEC/ACCEL/run/Intel-icc17.0-linux64.xml hw_cpu_name = Intel Xeon E5-2630 v3 hw_cpu_mhz = 2400 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_disk = 128 GB Samsung SSD 850 PRO hw_accel_model = Intel Xeon CPU E5-2630 v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon CPU E5-2630 v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_file = ext3 sw_state = Run level 5 (user-level) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable hw_accel_desc000 = Intel Xeon CPU E5-2630 v3 @ 2.40GHz hw_accel_desc001 = Turbo ON, SMT ON test_sponsor = HZDR license_num = 65A tester = HZDR hw_avail = Sep-2013 sw_avail = Mar-2015 prepared_by = kroh21 (is never output, only tags rawfile) hw_vendor = Asus hw_model = ASUS ESC4000 G3 Series hw_nthreadspercore = 2 hw_ncoresperchip = 8 hw_ncores = 16 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology up to 3.20 GHz hw_cpu_char001 = AVX clock: 2100 MHz hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-17000R-15, ECC, hw_memory001 = running at 1866 MHz) sw_compiler000 = C/C++/Fortran: Version 17.0.2.174 of the Intel sw_compiler001 = Compilers sw_os000 = Ubuntu 14.04.5 LTS sw_os001 = 4.4.0-38-generic notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul 5 11:51:03 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 32 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264058960 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = Ubuntu 14.04.5 LTS notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = debian_version: jessie/sid notes_plat_sysinfo_155 = os-release: notes_plat_sysinfo_160 = NAME="Ubuntu" notes_plat_sysinfo_165 = VERSION="14.04.5 LTS, Trusty Tahr" notes_plat_sysinfo_170 = ID=ubuntu notes_plat_sysinfo_175 = ID_LIKE=debian notes_plat_sysinfo_180 = PRETTY_NAME="Ubuntu 14.04.5 LTS" notes_plat_sysinfo_185 = VERSION_ID="14.04" notes_plat_sysinfo_190 = HOME_URL="http://www.ubuntu.com/" notes_plat_sysinfo_195 = SUPPORT_URL="http://help.ubuntu.com/" notes_plat_sysinfo_200 = rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = uname -a: notes_plat_sysinfo_215 = Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6 notes_plat_sysinfo_220 = 17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14 notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2 notes_plat_sysinfo_245 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_250 = /dev/sda1 ext3 44G 19G 24G 44% / notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = (End of data from sysinfo program) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = https://www.spec.org/accel/flags/Intel-icc17.0-linux64.20170906.xml hw_cpu_name = Intel Xeon E5-2630 v3 hw_cpu_mhz = 2400 hw_cpu_max_mhz = 3200 hw_fpu = Integrated hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_disk = 128 GB Samsung SSD 850 PRO hw_accel_model = Intel Xeon CPU E5-2630 v3 hw_accel_vendor = Intel hw_accel_name = Intel Xeon CPU E5-2630 v3 hw_accel_type = CPU hw_accel_connect = N/A hw_accel_ecc = yes sw_file = ext3 sw_state = Run level 5 (user-level) sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable hw_accel_desc000 = Intel Xeon CPU E5-2630 v3 @ 2.40GHz hw_accel_desc001 = Turbo ON, SMT ON test_sponsor = HZDR license_num = 65A tester = HZDR hw_avail = Sep-2013 sw_avail = Mar-2015 prepared_by = kroh21 (is never output, only tags rawfile) hw_vendor = Asus hw_model = ASUS ESC4000 G3 Series hw_nthreadspercore = 2 hw_ncoresperchip = 8 hw_ncores = 16 hw_nchips = 2 hw_cpu_char000 = Intel Turbo Boost Technology up to 3.20 GHz hw_cpu_char001 = AVX clock: 2100 MHz hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-17000R-15, ECC, hw_memory001 = running at 1866 MHz) sw_compiler000 = C/C++/Fortran: Version 17.0.2.174 of the Intel sw_compiler001 = Compilers sw_os000 = Ubuntu 14.04.5 LTS sw_os001 = 4.4.0-38-generic notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.2/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6965 $ $Date:: 2015-04-21 #$ c05a7f14b1b1765e3fe1df68447e8a35 notes_plat_sysinfo_010 = running on kepler028-gsi Wed Jul 5 11:51:03 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 32 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = cache size : 20480 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264058960 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = Ubuntu 14.04.5 LTS notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = debian_version: jessie/sid notes_plat_sysinfo_155 = os-release: notes_plat_sysinfo_160 = NAME="Ubuntu" notes_plat_sysinfo_165 = VERSION="14.04.5 LTS, Trusty Tahr" notes_plat_sysinfo_170 = ID=ubuntu notes_plat_sysinfo_175 = ID_LIKE=debian notes_plat_sysinfo_180 = PRETTY_NAME="Ubuntu 14.04.5 LTS" notes_plat_sysinfo_185 = VERSION_ID="14.04" notes_plat_sysinfo_190 = HOME_URL="http://www.ubuntu.com/" notes_plat_sysinfo_195 = SUPPORT_URL="http://help.ubuntu.com/" notes_plat_sysinfo_200 = rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_205 = notes_plat_sysinfo_210 = uname -a: notes_plat_sysinfo_215 = Linux kepler028-gsi 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6 notes_plat_sysinfo_220 = 17:20:43 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = run-level 5 Dec 16 18:14 notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = SPEC is set to: /tmp/spec/1.2 notes_plat_sysinfo_245 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_250 = /dev/sda1 ext3 44G 19G 24G 44% / notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = (End of data from sysinfo program)