# Invocation command line:
# /root/SPEC2006v1_0/bin/runspec -c linux64-intel-gcc41numactl -F linux64-gcc_flags.xml -r -C 8 -T base int
# output_root was not used for this run
############################################################################
####################################################################
# AMD64 (64-bit) gcc 4.1 config file for SPEC CPU2006 on Colfax Intel Server Board
# Aug-2007
#####################################################################

#####################################################################
# Header Section 
#####################################################################

ignore_errors = no
tune          = base
ext           = linux64-intel-gcc41
output_format = asc
reportable    = 1
teeout        = yes
teerunout     = yes
license_num   = 49
tester = Advanced Micro Devices
prepared_by   = AMD Performance Labs
test_date     = Sep-2007
sw_other = None
test_sponsor = Advanced Micro Devices

bind0         = numactl --physcpubind=0
bind1         = numactl --physcpubind=1
bind2         = numactl --physcpubind=2
bind3         = numactl --physcpubind=3
bind4         = numactl --physcpubind=4
bind5         = numactl --physcpubind=5
bind6         = numactl --physcpubind=6
bind7         = numactl --physcpubind=7

submit       = echo "$command" > run.sh ; $BIND bash run.sh

#include: linux64-intel-gcc_sut.cfg
#  ----- Begin inclusion of 'linux64-intel-gcc_sut.cfg'
############################################################################

############################ Hardware Info ###########################
default=default=default=default:
hw_avail     	   = May-2007
hw_cpu_name        = Intel Xeon E5345
hw_cpu_char        = 
hw_cpu_mhz         = 2333
hw_fpu             = Integrated
hw_nchips          = 2
hw_ncores          = 8
hw_ncoresperchip   = 4
hw_nthreadspercore = 1
hw_ncpuorder       = 1,2 chips
hw_pcache          = 32 KB I + 32 KB D on chip per core
hw_scache          = 8 MB I+D on chip per chip, 4 MB shared / 2 cores
hw_tcache          = None
hw_ocache          = None
hw_vendor          = Intel Corporation
hw_model000        = Intel S5000PAL Server Board, Intel Xeon processor
hw_model001 = E5345, 2.33 GHz
hw_disk            = 1x250GB SATA, 7200 RPM
hw_memory          = 16 GB (8x2GB, DDR2-667 FBDIMM CL5 Reg Dual Rank)
hw_other           = None
notes_000          = "powersave -f" used to set speed to maximum
notes_005 =
notes_010 = The test system can be assembled using a
notes_015 = Delta TDPS-600AB 600W 12V power supply.
1note220	   = BIOS set to "Optimized Defaults" (F9)
## SW config
sw_os         = SuSE Linux Enterprise Server 10 SP1 64-bit kernel
sw_file       = ext3
sw_state      = Multi-user, run level 3
sw_compiler   = gcc, g++ 4.1.2
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = Not Applicable
sw_auto_parallel = No
sw_avail      = Jul-2007

# ---- End inclusion of '/root/SPEC2006v1_0/config/linux64-intel-gcc_sut.cfg'

default=default=default=default:
#####################################################################
#
# Compiler selection
#
#####################################################################

CC            = gcc
CXX           = g++
FC            = gfortran

#####################################################################
# Optimization
#####################################################################

## Base flags
default=base=default=default:
COPTIMIZE    = -O3 -fno-inline-functions -funroll-loops
CXXOPTIMIZE  = -O3 -funroll-loops
FOPTIMIZE    = -O3 -fno-inline-functions -funroll-loops

#####################################################################
# 32/64 bit Portability Flags - all
#####################################################################

default=base=default=default:
PORTABILITY = -DSPEC_CPU_LP64

#####################################################################
# Portability Flags - INT
#####################################################################

400.perlbench=default=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

462.libquantum=default=default=default:
CPORTABILITY=  -DSPEC_CPU_LINUX

481.wrf=default=default=default:
CPORTABILITY=-DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 
notes0500    = wrf needs wrf_data_header_size 8
notes0501    = to read the unformatted data input file correctly
wrf_data_header_size = 8

483.xalancbmk=default=default=default:
CXXPORTABILITY= -DSPEC_CPU_LINUX






# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl000= http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.03.xml
notes_os_000 ='numactl' was used to bind copies to the cores