# Invocation command line: # /home/cpu2006/bin/runspec -a validate -c 120li_int_5130.cfg -F config/NEC-ic10-INT-ia32-linux64-flags-file-20071017.xml -T all -o all int # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 10.0 # Operating system version: 64-Bit SUSE LINUX Enterprise Server 10 or later # Hardware: Intel Core 2 and compatible Intel processors # supporting Intel 64 and SSSE3 # ############################################################################ # SPEC CPU2006 Intel Linux32 config file # May 7 2007 Intel Compiler 10.0 for Linux32 ############################################################################ action = validate tune = base ext = 120li PATHSEP = / check_md5=1 reportable=1 ####################################################################### # System information # # If some remarks about BIOS or Firmware are needed, place them here. # ####################################################################### default=default=default=default: notes_os_000 = 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run int=default=default=default: notes_000= notes_005=All benchmarks compiled in 32-bit mode except 401.bzip2 and 456.hmmer, notes_010=for peak, are compiled in 64-bit mode notes_015= fp=default=default=default: notes_000= ##################################### # Description Hardware and Software # ##################################### default=default=default=default: license_num = 9006 test_sponsor = NEC Corporation tester = NEC Corporation hw_vendor = NEC Corporation hw_avail = May-2007 hw_model000 = Express5800/120Li hw_model001 = (Intel Xeon processor 5130) hw_cpu_name = Intel Xeon 5130 hw_cpu_char = 2.00 GHz, 4 MB L2, 1333 MHz bus hw_cpu_mhz = 2000 hw_fpu = Integrated hw_nchips = 2 hw_ncores = 4 hw_ncoresperchip = 2 hw_nthreadspercore = 1 hw_ncpuorder = 1,2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 4 MB I+D on chip per chip hw_tcache = None hw_ocache = None hw_memory = 8 GB (8x1 GB PC2-5300F, 2 rank, CL5-5-5, ECC) hw_disk = 1x73.2 GB SAS, 15000RPM hw_other = None sw_file = ext2 sw_state = Multiuser, Runlevel 3 test_date = Oct-2007 sw_auto_parallel = No prepared_by = NEC Corporation # # These are listed as benchmark-tuning-extension-machine # default=default=default=default: CC = icc CXX = icpc FC = ifort OBJ = .o SMARTHEAP_DIR = /opt/SmartHeap_8.1/lib submit= taskset -c $SPECCOPYNUM $command ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ 400.perlbench=default: CPORTABILITY= -DSPEC_CPU_LINUX_IA32 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 435.gromacs=default: LDPORTABILITY= -nofor_main 436.cactusADM=default: LDPORTABILITY= -nofor_main 454.calculix=default: LDPORTABILITY= -nofor_main 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 481.wrf=default: CPORTABILITY= -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG 483.xalancbmk=default: CXXPORTABILITY= -DSPEC_CPU_LINUX # Tuning Flags ################################################################ # # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language all_cpp=default: EXTRA_LIBS= -L$(SMARTHEAP_DIR) -lsmartheap EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= -fast # COPTIMIZE= -xP # COPTIMIZE= -xT -ipo -O3 -no-prec-div -static # COPTIMIZE= -xP -ipo -O3 -no-prec-div -static CXXOPTIMIZE= -xT -ipo -O3 -no-prec-div ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -fast # COPTIMIZE= -xP CXXOPTIMIZE= -xT -ipo -O3 -no-prec-div PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use 400.perlbench=peak=default: COPTIMIZE= -fast -ansi-alias -prefetch # COPTIMIZE= -xP -ansi-alias -prefetch # COPTIMIZE= -xP -ipo -O3 -no-prec-div -static -ansi-alias -prefetch 401.bzip2=peak=default: CC= /opt/intel/cce/10.0.023/bin/icc -L/opt/intel/cce/10.0.023/lib -I/opt/intel/cce/10.0.023/include CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -fast 403.gcc=peak=default: basepeak=yes 429.mcf=peak=default: COPTIMIZE= -fast -prefetch feedback=0 445.gobmk=peak=default: COPTIMIZE= -xT -O2 -ipo -no-prec_div -ansi-alias 456.hmmer=peak=default: CC= /opt/intel/cce/10.0.023/bin/icc -L/opt/intel/cce/10.0.023/lib -I/opt/intel/cce/10.0.023/include CPORTABILITY= -DSPEC_CPU_LP64 COPTIMIZE= -fast -unroll2 -ansi-alias 458.sjeng=peak=default: COPTIMIZE= -fast -unroll4 462.libquantum=peak=default: COPTIMIZE= -fast -unroll4 -Ob0 -prefetch -opt-streaming-stores always 464.h264ref=peak=default: COPTIMIZE= -fast -unroll2 -ansi-alias 471.omnetpp=peak=default: CXXOPTIMIZE= -xT -O3 -ipo -no-prec_div -ansi-alias 473.astar=peak=default: CXXOPTIMIZE= -xT -O3 -ipo -no-prec_div -ansi-alias 483.xalancbmk=peak=default: basepeak=yes ######################### # Used Compilers and OS # ######################### int=default=default=default: sw_compiler000 = Intel C++ Compiler for IA32/EM64T application, sw_compiler001 = Version 10.0 - Build 20070426 Package ID: sw_compiler002 = l_cc_p_10.0.023 sw_other000 = MicroQuill SmartHeap library 8.1 sw_other001 = binutils-2.17.tar.gz, Version 2.17 sw_auto_parallel = No sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit fp=default=default=default: sw_compiler001 = Intel C++ Compiler for Linux32 version 10.0 sw_compiler002 = Build 20070426 Package ID: l_cc_p_10.0.023 sw_compiler003 = Intel Fortran Compiler for Linux32 version 10.0 sw_compiler004 = Build 20070426 Package ID: l_fc_p_10.0.023 sw_auto_parallel = No sw_other = None sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32-bit default=default=default=default: sw_os000 = 64-Bit SUSE LINUX Enterprise Server 10, Kernel sw_os001 = 2.6.16.21-0.8-smp for x86_64 sw_avail = Jun-2007 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000= http://www.spec.org/cpu2006/flags/NEC-ic10-INT-ia32-intel64-linux-flags.xml