# Invocation command line:
# E:\CPU2006-v1.0\bin\runspec -c fsc-ic101-20071206-speed-fp -T all --input ref -n 3 -o all fp
# output_root was not used for this run
############################################################################
# SPEC CPU2006 Intel Windows Vista config file
# OS: 64 bit;   Binaries: 64 bit
# December 2007
#
# Intel Compiler 10.1
# Microsoft Visual Studio 2005 with SP1
# SmartHeap Library 8.0

action = validate
tune = base or peak
ext = CPU2006.v10.ic101.speed64.20071206
PATHSEP =	/
flagsurl000= http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.02.xml

check_md5 = 1
mean_anyway = 1
reportable = 1

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# File to be included into config file for SPEC CPU2006

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

%ifdef %{binding}
use_submit_for_speed=1
submit=specperl -e "system sprintf qq{start /b /wait /affinity %x %s}, (1<<$SPECUSERNUM), qq{$command}"
#submit=specperl -e "system sprintf qq{start /b /wait /affinity %x %s}, (1<<(2*$SPECUSERNUM)), qq{$command}"

notes960='start /b /wait /affinity' command is used to bind CPU(s) to processors.
notes962=The Windows command "start /b /wait /affinity <hex_affinity_mask> application"
notes964=  starts the specified application without creating a new window (/b)
notes966=  and waits for its termination (/wait). Only the processors specified
notes968=  in <hex_affinity_mask> are allowed to execute the application.
notes970=  See the Windows documentation for the description of other parameters
notes972=  of the start command.
notes974=
%endif

################################################################
# System information
# If some remarks about BIOS or Firmware are needed, place them here.
################################################################

default=default=default=default:
# notes900=
# notes901=The system bus runs at 1066 MHz

notes_plat_000=BIOS default settings have been used.
# notes_plat_000=BIOS default settings have been used, except:
# notes_plat_010=Snoop Filter Enabled
# notes_plat_020=   (The Snoop Filter is designed to reduce system bus utilization coming
# notes_plat_030=   from cache misses. It can lead to significant memory performance
# notes_plat_040=   improvements for several workstation applications on suitable memory
# notes_plat_050=   configurations.)
# notes_plat_060=Adjacent Cache Line Prefetch Enabled
# notes_plat_070=  (Prefetches a cache line pair of data instead of only the cache line
# notes_plat_080=  that contains the requested data. This helps to improve data access time
# notes_plat_090=  for some applications, especially for single processors.)
# notes_plat_100=High Bandwith Option Enabled
# notes_plat_110=  (To Optimize throughput of High Bandwidth FSB applications
# notes_plat_120=  on multiprocessor configurations)

################################################################
# About Fujitsu Siemens Computers
################################################################

default=default=default=default:
notes_000=
notes_005=For information about Fujitsu Siemens Computers please see:
notes_010=http://www.fujitsu-siemens.com

################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor = Fujitsu Siemens Computers
hw_model = CELSIUS M460, Intel Core 2 Quad Q6700 processor
hw_cpu_name = Intel Core 2 Quad Q6700
hw_cpu_char =
hw_cpu_mhz = 2667
hw_fpu = Integrated
#
hw_nchips = 1
hw_ncores = 4
hw_ncoresperchip = 4
hw_nthreadspercore = 1
#
hw_ncpuorder = 1 chip
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 8 MB I+D on chip per chip, 4 MB shared / 2 cores
hw_tcache = None
hw_ocache = None
hw_memory = 4 GB (4x1 GB PC2-6400 CL6 SDRAM)
hw_disk = 1 x 400 GB SATA II 7200 RPM
hw_other = None

sw_file = NTFS
sw_state = Default

license_num = 22
test_sponsor = Fujitsu Siemens Computers
tester = Fujitsu Siemens Computers
test_date = Dec-2007
hw_avail = Nov-2007
prepared_by = Fujitsu Siemens Computers
config =
# ---- End inclusion of 'E:/CPU2006-v1.0/config/SUT.inc'

################################################################
# Compiler section
################################################################

int=default=default=default:
CC  = icl -Qvc8 -Qc99
CXX = icl -Qvc8
EXTRA_LDFLAGS = -F512000000
OBJ = .obj

fp=default=default=default:
CC  = icl -Qvc8 -Qc99
CXX = icl -Qvc8
FC  = ifort
EXTRA_LDFLAGS = -F1000000000
OBJ = .obj

################################################################
#			portability                            #
################################################################

default:
PORTABILITY       =   -DSPEC_CPU_P64

400.perlbench=default=default=default:
CPORTABILITY      = -DSPEC_CPU_NO_NEED_VA_COPY -DSPEC_CPU_WIN64_X64

403.gcc=default=default=default:
CPORTABILITY      = -DSPEC_CPU_WIN64 
EXTRA_CFLAGS      = -Dalloca=_alloca 

436.cactusADM=default=default=default:
FPORTABILITY      = -Qlowercase /assume:underscore

444.namd=default=default=default:
CXXPORTABILITY    =  /TP

447.dealII=default:
CXXPORTABILITY    = -DDEAL_II_MEMBER_VAR_SPECIALIZATION_BUG

453.povray=default=default=default:
CXXPORTABILITY    = -DSPEC_CPU_WINDOWS_ICL

454.calculix=default=default=default:
FPORTABILITY      = -Qlowercase 
CPORTABILITY      = -DSPEC_CPU_NOZMODIFIER  

464.h264ref=default=default=default:
CPORTABILITY      = -DWIN32 -DSPEC_CPU_NO_INTTYPES  

471.omnetpp=default:
CXXPORTABILITY    = -DSPEC_CPU_WIN64  

481.wrf=default:
CPORTABILITY      = -DSPEC_CPU_WINDOWS_ICL  

483.xalancbmk=default=default=default:
CXXPORTABILITY    = -Qoption,cpp,--no_wchar_t_keyword

################################################################
#		        Baseline Tuning Flags                  #
################################################################

###########################
#  baseline for INT 2006  #
###########################

int=base=default=default:
COPTIMIZE = -fast -Qparallel -Qvec-guard-write -Qpar-runtime-control
CXXOPTIMIZE = -fast -Qcxx-features

##########################
#  baseline for FP 2006  #
##########################

fp=base=default=default:
COPTIMIZE = -fast -Qparallel
CXXOPTIMIZE = -fast -Qparallel -Qcxx-features
FOPTIMIZE = -fast -Qparallel

###########################################
#  Libraries:                             #
#    for C++ : libguide40.lib, SmartHeap  #
#    others  : libguide40.lib             #
###########################################

default=base=default=default:
EXTRA_LIBS = libguide40.lib

all_cpp=base=default=default:
EXTRA_LIBS = libguide40.lib shlW64M.lib
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

################################################################
#			    Peak Tuning Flags		       #
################################################################

###########################
#      peak for INT 2006  #
###########################

# feedback is default for int
int=peak=default=default:
PASS1_CFLAGS = -Qprof_gen
PASS1_CXXFLAGS = -Qprof_gen
PASS1_FFLAGS = -Qprof_gen
PASS1_LDFLAGS = -Qprof_gen
PASS2_CFLAGS = -Qprof_use
PASS2_CXXFLAGS = -Qprof_use
PASS2_FFLAGS = -Qprof_use
PASS2_LDFLAGS = -Qprof_use

400.perlbench=peak=default=default:
COPTIMIZE = -fast -Qparallel -Qpar-runtime-control -Qansi-alias -Qprefetch
EXTRA_LIBS = libguide40.lib shlW64M.lib
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

401.bzip2=peak=default=default:
COPTIMIZE = -fast -Qprefetch
EXTRA_LIBS = libguide40.lib

403.gcc=peak=default=default:
COPTIMIZE = -fast
EXTRA_LIBS = libguide40.lib

429.mcf=peak=default=default:
basepeak=yes

445.gobmk=peak=default=default:
COPTIMIZE = -O2 -Qipo -QxT -Qprec-div- -Qansi-alias
EXTRA_LIBS =

456.hmmer=peak=default=default:
COPTIMIZE = -fast -Qunroll2 -Qansi-alias -Qopt-multi-version-aggressive
EXTRA_LIBS = libguide40.lib

458.sjeng=peak=default=default:
COPTIMIZE = -fast -Qunroll4
EXTRA_LIBS = libguide40.lib

462.libquantum=peak=default=default:
feedback=no
COPTIMIZE = -fast -Qunroll4 -Qparallel -Qpar-runtime-control -Qprefetch -Qopt-streaming-stores:always -Ob0
EXTRA_LIBS = libguide40.lib

464.h264ref=peak=default=default:
COPTIMIZE = -fast -Qunroll2 -Qansi-alias
EXTRA_LIBS = libguide40.lib

471.omnetpp=peak=default=default:
CXXOPTIMIZE = -fast -Qcxx-features -Qansi-alias -Qopt-ra-region-strategy=block
EXTRA_LIBS = libguide40.lib shlW64M.lib
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

473.astar=peak=default=default:
CXXOPTIMIZE = -fast -Qcxx-features -Qansi-alias -Qopt-ra-region-strategy=routine
EXTRA_LIBS = libguide40.lib shlW64M.lib
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

483.xalancbmk=peak=default=default:
CXXOPTIMIZE = -fast -Qcxx-features -Qansi-alias
EXTRA_LIBS = libguide40.lib shlW64M.lib
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

##########################
#  	peak for FP 2006 #
##########################

# Define +FDO as default for fp peak

fp=peak=default=default:
PASS1_CFLAGS = -Qprof_gen
PASS1_CXXFLAGS = -Qprof_gen
PASS1_FFLAGS = -Qprof_gen
PASS1_LDFLAGS = -Qprof_gen
PASS2_CFLAGS = -Qprof_use
PASS2_CXXFLAGS = -Qprof_use
PASS2_FFLAGS = -Qprof_use
PASS2_LDFLAGS = -Qprof_use

410.bwaves=peak=default=default:
# FOPTIMIZE=-fast -Qparallel -Qprefetch
# EXTRA_LIBS = libguide40.lib
basepeak=yes

416.gamess=peak=default=default:
# FOPTIMIZE=-fast -Qunroll2 -Qscalar-rep- -Qansi-alias -Ob0
# EXTRA_LIBS = libguide40.lib
basepeak=yes

433.milc=peak=default=default:
COPTIMIZE=-fast
EXTRA_LIBS = libguide40.lib

434.zeusmp=peak=default=default:
feedback=no
FOPTIMIZE=-O2 -Qunroll0 -QxT -Qscalar-rep- -Qprec-div-
EXTRA_LIBS = libguide40.lib

435.gromacs=peak=default=default:
OPTIMIZE=-fast
EXTRA_LIBS = libguide40.lib

436.cactusADM=peak=default=default:
OPTIMIZE=-fast -Qparallel -Qprefetch -Qunroll2
EXTRA_LIBS = libguide40.lib

437.leslie3d=peak=default=default:
basepeak=yes

444.namd=peak=default=default:
feedback=no
CXXOPTIMIZE = -fast -Qcxx-features -Oa
EXTRA_LIBS = libguide40.lib shlW64M.lib
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

447.dealII=peak=default=default:
CXXOPTIMIZE = -fast -Qcxx-features
EXTRA_LIBS = libguide40.lib shlW64M.lib
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

450.soplex=peak=default=default:
CXXOPTIMIZE = -fast -Qcxx-features
EXTRA_LIBS = libguide40.lib shlW64M.lib
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

453.povray=peak=default=default:
CXXOPTIMIZE = -fast -Qcxx-features
EXTRA_LIBS = libguide40.lib shlW64M.lib
LDOUT = -Fe$@ -link -FORCE:MULTIPLE

454.calculix=peak=default=default:
OPTIMIZE=-fast -Qunroll-aggressive
EXTRA_LIBS = libguide40.lib

459.GemsFDTD=peak=default=default:
basepeak=yes

465.tonto=peak=default=default:
feedback=no
FOPTIMIZE=-fast -Qunroll4 -Qauto
EXTRA_LIBS = libguide40.lib

470.lbm=peak=default=default:
feedback=no
COPTIMIZE=-fast -Qunroll2 -Qscalar-rep- -Qprefetch
EXTRA_LIBS = libguide40.lib

481.wrf=peak=default=default:
basepeak=yes

482.sphinx3=peak=default=default:
feedback=no
COPTIMIZE=-fast -Qunroll2
EXTRA_LIBS = libguide40.lib

################################################################
#			    	Used Compilers and OS          #
################################################################

default=default=default=default:
sw_compiler  =Intel C++ Compiler
sw_compiler1 =.  for applications running on Intel 64,
sw_compiler2 =.  Version 10.1.011, Build 20070913
sw_compiler6 =Microsoft Visual Studio 2005 with SP1
sw_compiler7 =.  (for libraries)

fp=default=default=default:
sw_compiler000=Intel C++ and Fortran Compilers
sw_compiler001=for Intel64,
sw_compiler002=Version 10.1, Build 20070913
sw_compiler003=Microsoft Visual Studio 2005 with SP1
sw_compiler004=(for libraries)

default=default=default=default:
sw_other = MicroQuill SmartHeap Library, Version 8.0 (64 bit)
sw_os = Microsoft Windows Vista Ultimate (x64)
sw_avail = Nov-2007

sw_auto_parallel = Yes
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 64-bit

################################################################
#				END config file                #
################################################################

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_os_000 =OMP_NUM_THREADS set to number of cores (default).