# Invocation command line:
# E:\CPU2006-v1.0\bin\runspec -c fsc-ic101-20071206-rate-fp -T all --input ref -n 3 --rate 4 -o all fp
# output_root was not used for this run
############################################################################
# SPEC CPU2006 Intel Windows Vista config file
# OS: 64 bit;   Binaries: 64 bit
# December 2007
#
# Intel Compiler 10.1
# Microsoft Visual Studio 2005 with SP1
# SmartHeap Library 8.0

action = validate
tune = base or peak
ext = CPU2006.v10.ic101.rate64.20071206
PATHSEP =	/
flagsurl000= http://www.spec.org/cpu2006/flags/CPU2006_flags.20090713.03.xml

check_md5 = 1
mean_anyway = 1
reportable = 1

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# File to be included into config file for SPEC CPU2006

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

%ifdef %{binding}
use_submit_for_speed=1
submit0 = echo @ echo off >runex.cmd
submit1 = specperl -e "system sprintf qq{echo set MYMASK= %x >>runex.cmd}, (1<<$SPECCOPYNUM)"
submit2 = echo start /b /wait /affinity %MYMASK% $command >>runex.cmd
submit3 = call runex.cmd
#submit=specperl -e "system sprintf qq{start /b /wait /affinity %x %s}, (1<<(2*$SPECCOPYNUM)), qq{$command}"

notes960='start /b /wait /affinity' command is used to bind CPU(s) to processors.
notes962=The Windows command "start /b /wait /affinity <hex_affinity_mask> application"
notes964=  starts the specified application without creating a new window (/b)
notes966=  and waits for its termination (/wait). Only the processors specified
notes968=  in <hex_affinity_mask> are allowed to execute the application.
notes970=  See the Windows documentation for the description of other parameters
notes972=  of the start command.
notes974=
%endif

################################################################
# System information
# If some remarks about BIOS or Firmware are needed, place them here.
################################################################

default=default=default=default:
# notes900=
# notes901=The system bus runs at 1066 MHz

notes_plat_000=BIOS default settings have been used.
# notes_plat_000=BIOS default settings have been used, except:
# notes_plat_010=Snoop Filter Enabled
# notes_plat_020=   (The Snoop Filter is designed to reduce system bus utilization coming
# notes_plat_030=   from cache misses. It can lead to significant memory performance
# notes_plat_040=   improvements for several workstation applications on suitable memory
# notes_plat_050=   configurations.)
# notes_plat_060=Adjacent Cache Line Prefetch Enabled
# notes_plat_070=  (Prefetches a cache line pair of data instead of only the cache line
# notes_plat_080=  that contains the requested data. This helps to improve data access time
# notes_plat_090=  for some applications, especially for single processors.)
# notes_plat_100=High Bandwith Option Enabled
# notes_plat_110=  (To Optimize throughput of High Bandwidth FSB applications
# notes_plat_120=  on multiprocessor configurations)

################################################################
# About Fujitsu Siemens Computers
################################################################

default=default=default=default:
notes_000=
notes_005=For information about Fujitsu Siemens Computers please see:
notes_010=http://www.fujitsu-siemens.com/

################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor = Fujitsu Siemens Computers
hw_model = CELSIUS M460, Intel Core 2 Quad Q9550
hw_cpu_name = Intel Core 2 Quad Q9550
hw_cpu_char =
hw_cpu_mhz = 2833
hw_fpu = Integrated
#
hw_nchips = 1
hw_ncores = 4
hw_ncoresperchip = 4
hw_nthreadspercore = 1
#
hw_ncpuorder = 1 chip
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 12 MB I+D on chip per chip, 6 MB shared / 2 cores
hw_tcache = None
hw_ocache = None
hw_memory = 4 GB (4x1 GB PC2-6400 CL6 SDRAM)
hw_disk = 1 x 400 GB SATA 7200 RPM
hw_other = None

sw_file = NTFS
sw_state = Default

license_num = 22
test_sponsor = Fujitsu Siemens Computers
tester = Fujitsu Siemens Computers
test_date = Mar-2008
hw_avail = Mar-2008
prepared_by = Fujitsu Siemens Computers
config =
# ---- End inclusion of 'E:/CPU2006-v1.0/config/SUT.inc'

################################################################
# Compiler section
################################################################

int=default=default=default:
CC  = icl -Qvc8 -Qc99
CXX = icl -Qvc8
EXTRA_LDFLAGS = -F512000000
OBJ = .obj

fp=default=default=default:
CC  = icl -Qvc8 -Qc99
CXX = icl -Qvc8
FC  = ifort
EXTRA_LDFLAGS = -F950000000
OBJ = .obj

################################################################
# Portability section
################################################################

default:
PORTABILITY       =   -DSPEC_CPU_P64

400.perlbench=default=default=default:
CPORTABILITY      = -DSPEC_CPU_NO_NEED_VA_COPY -DSPEC_CPU_WIN64_X64

403.gcc=default=default=default:
CPORTABILITY      = -DSPEC_CPU_WIN64 
EXTRA_CFLAGS      = -Dalloca=_alloca 

436.cactusADM=default=default=default:
FPORTABILITY      = -Qlowercase -assume:underscore

444.namd=default=default=default:
CXXPORTABILITY    =  -TP

447.dealII=default:
CXXPORTABILITY    = -DDEAL_II_MEMBER_VAR_SPECIALIZATION_BUG

453.povray=default=default=default:
CXXPORTABILITY    = -DSPEC_CPU_WINDOWS_ICL

454.calculix=default=default=default:
FPORTABILITY      = -Qlowercase 
CPORTABILITY      = -DSPEC_CPU_NOZMODIFIER  

464.h264ref=default=default=default:
CPORTABILITY      = -DWIN32 -DSPEC_CPU_NO_INTTYPES  

471.omnetpp=default:
CXXPORTABILITY    = -DSPEC_CPU_WIN64  

481.wrf=default:
CPORTABILITY      = -DSPEC_CPU_WINDOWS_ICL  

483.xalancbmk=default=default=default:
CXXPORTABILITY    = -Qoption,cpp,--no_wchar_t_keyword

################################################################
# SmartHeap Tuning Flags
################################################################

all_c,all_cpp=base=default=default:
EXTRA_LIBS = shlW64M.lib
# LDOUT = -Fe$@ -link -FORCE:MULTIPLE

################################################################
# Baseline Tuning Flags
# default baseline for int and fp 2006
################################################################

int=base=default=default:
OPTIMIZE=        -fast 
COPTIMIZE=       -Qvec-guard-write
CXXOPTIMIZE=     -Qcxx_features 
sw_base_ptrsize = 64-bit

fp=base=default=default:
COPTIMIZE = -fast
CXXOPTIMIZE = -fast -Qcxx-features
FOPTIMIZE = -fast
sw_base_ptrsize = 64-bit

################################################################
# Peak Tuning Flags
################################################################

# default peak for int and fp 2006

int=peak=default=default:
OPTIMIZE=       -fast 
CXXOPTIMIZE=    -Qcxx_features 
PASS1_CFLAGS=    -Qprof_gen
PASS2_CFLAGS=    -Qprof_use
PASS1_CXXFLAGS=  -Qprof_gen
PASS2_CXXFLAGS=  -Qprof_use
PASS1_FFLAGS=    -Qprof_gen
PASS2_FFLAGS=    -Qprof_use
PASS1_LDFLAGS=   -Qprof_gen
PASS2_LDFLAGS=   -Qprof_use
sw_peak_ptrsize = 64-bit

400.perlbench=peak=default:
OPTIMIZE= -fast -Qansi-alias -Qprefetch
EXTRA_LIBS=     shlW64M.lib 
LDOUT=          -Fe$@ -link -FORCE:MULTIPLE

401.bzip2=peak=default:
OPTIMIZE= -fast -Qprefetch

403.gcc=peak=default:
OPTIMIZE= -fast  
EXTRA_LIBS=

429.mcf=peak=default:
# OPTIMIZE= -fast -Qprefetch
# EXTRA_LIBS=     shlW64M.lib 
# LDOUT=          -Fe$@ -link -FORCE:MULTIPLE
basepeak=yes

445.gobmk=peak=default:
OPTIMIZE= -QxT -O2 -Qipo -Qprec-div- -Qansi-alias
EXTRA_LIBS=

456.hmmer=peak=default:
OPTIMIZE= -fast -Qunroll2 -Qansi-alias -Qopt-multi-version-aggressive

458.sjeng=peak=default:
OPTIMIZE= -fast -Qunroll4

462.libquantum=peak=default:
# OPTIMIZE= -fast -Qunroll4 -Ob0 -Qprefetch -Qopt-streaming-stores:always  -Qparallel -Qpar-runtime-control
# feedback=no
# copies=1
# submit=
basepeak=yes

464.h264ref=peak=default:
OPTIMIZE= -fast -Qunroll2 -Qansi-alias

471.omnetpp=peak=default:
OPTIMIZE= -fast -Qansi-alias -Qopt-ra-region-strategy=block

473.astar=peak=default:
OPTIMIZE= -fast -Qansi-alias -Qopt-ra-region-strategy=routine

483.xalancbmk=peak=default:
OPTIMIZE= -fast -Qansi-alias

################################################################
# Peak Tuning Flags fp 2006 fast
################################################################

# define default: -fast +FDO [C++ additionally: -Qcxx-features]
fp=peak=default=default:
COPTIMIZE = -fast
CXXOPTIMIZE = -fast -Qcxx-features
FOPTIMIZE = -fast

PASS1_CFLAGS = -Qprof_gen
PASS1_CXXFLAGS = -Qprof_gen
PASS1_FFLAGS = -Qprof_gen
PASS1_LDFLAGS = -Qprof_gen
PASS2_CFLAGS = -Qprof_use
PASS2_CXXFLAGS = -Qprof_use
PASS2_FFLAGS = -Qprof_use
PASS2_LDFLAGS = -Qprof_use

EXTRA_LIBS =
sw_peak_ptrsize  = 64-bit

# 410.bwaves is Fortran
# use default: -fast +FDO
# copies=4

# 416.gamess is Fortran
416.gamess=peak=default:
basepeak=yes

# 433.milc is C
# use default: -fast +FDO

# 434.zeusmp is Fortran
434.zeusmp=peak=default:
FOPTIMIZE= -QxT -O2 -Qprec-div- -Qunroll0 -Qscalar-rep-
feedback=0

# 435.gromacs is Mix Fortran/C
# use default: -fast +FDO

# 436.cactusADM is Mix Fortran / C
436.cactusADM=peak=default:
FOPTIMIZE = -fast -Qunroll2 -Qprefetch
COPTIMIZE = -fast -Qunroll2 -Qprefetch
feedback=0

# 437.leslie3d is Fortran
437.leslie3d=peak=default:
basepeak=yes  
# copies=4

# 444.namd is C++
444.namd=peak=default:
CXXOPTIMIZE= -fast -Oa
feedback=0
EXTRA_LIBS = shlW64M.lib
# LDOUT = -Fe$@ -link -FORCE:MULTIPLE

# 447.dealII is C++
# use default: -fast +FDO -Qcxx-features

# 450.soplex is C++
# use default: -fast +FDO -Qcxx-features

# 453.povray is C++
# use default: -fast +FDO -Qcxx-features

# 454.calculix is Mix Fortran / C
454.calculix=peak=default:
FOPTIMIZE= -fast -Qunroll-aggressive
COPTIMIZE= -fast -Qunroll-aggressive
feedback=0

# 459.GemsFDTD is Fortran
459.GemsFDTD=peak=default:
FOPTIMIZE= -fast -Qunroll2 -Ob0 -Qprefetch
feedback=0

# 465.tonto is Fortran
465.tonto=peak=default:
basepeak=yes

# 470.lbm is C
470.lbm=peak=default:
COPTIMIZE= -fast -Qunroll2 -Qscalar-rep- -Qprefetch
feedback=0
copies=1

# 481.wrf is Mix Fortran / C
481.wrf=peak=default:
basepeak=yes

# 482.sphinx3 is C
482.sphinx3=peak=default:
basepeak=yes
# copies=4
# copies=8

################################################################
#			    	Used Compilers and OS          #
################################################################

default=default=default=default:
sw_compiler  =Intel C++ Compiler
sw_compiler1 =.  for applications running on Intel 64,
sw_compiler2 =.  Version 10.1.011, Build 20070913
sw_compiler6 =Microsoft Visual Studio 2005 with SP1
sw_compiler7 =.  (for libraries)
sw_other001 = SmartHeap Library Version 8.0 (64 bit) from
sw_other002 = http://www.microquill.com/
sw_auto_parallel = No

fp=default=default=default:
sw_compiler000=Intel C++ Compiler
sw_compiler001=for applications running on Intel 64,
sw_compiler002=Version 10.1, Build 20070913
sw_compiler003=Intel Visual Fortran Compiler
sw_compiler004=for applications running on Intel 64,
sw_compiler005=Version 10.1, Build 20070913
sw_compiler006=Microsoft Visual Studio 2005 with SP1
sw_compiler007=(for libraries)
sw_other000 = SmartHeap Library Version 8.0 (64 bit) from
sw_other001 = http://www.microquill.com/
sw_auto_parallel = No

default=default=default=default:
sw_os = Windows Vista Ultimate, 64 bit Version
sw_avail = Nov-2007