# Invocation command line:
# /spec/cpu2006/v1.1/bin/runspec -c PubAug10-795 -r int --nopreenv --note-preenv
# output_root used was "/spec/cpu2006/v1.1/zPubAug10-795"
############################################################################
# The following line MUST be set to the suite installed path!
%define install_path /spec/cpu2006/v1.1
#######################################################################
#
# SPEC CPU2006 Benchmark Config file IBM Power with AIX
#
#######################################################################

bind = \
0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 104 108 112 116 120 124 \
128 132 136 140 144 148 152 156 160 164 168 172 176 180 184 188 192 196 200 204 208 212 216 220 224 \
228 232 236 240 244 248 252 256 260 264 268 272 276 280 284 288 292 296 300 304 308 312 316 320 324 \
328 332 336 340 344 348 352 356 360 364 368 372 376 380 384 388 392 396 400 404 408 412 416 420 424 \
428 432 436 440 444 448 452 456 460 464 468 472 476 480 484 488 492 496 500 504 508 512 516 520 524 \
528 532 536 540 544 548 552 556 560 564 568 572 576 580 584 588 592 596 600 604 608 612 616 620 624 \
628 632 636 640 644 648 652 656 660 664 668 672 676 680 684 688 692 696 700 704 708 712 716 720 724 \
728 732 736 740 744 748 752 756 760 764 768 772 776 780 784 788 792 796 800 804 808 812 816 820 824 \
828 832 836 840 844 848 852 856 860 864 868 872 876 880 884 888 892 896 900 904 908 912 916 920 924 \
928 932 936 940 944 948 952 956 960 964 968 972 976 980 984 988 992 996 1000 1004 1008 1012 1016 1020 \
1 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 65 69 73 77 81 85 89 93 97 101 105 109 113 117 121 125 \
129 133 137 141 145 149 153 157 161 165 169 173 177 181 185 189 193 197 201 205 209 213 217 221 225 \
229 233 237 241 245 249 253 257 261 265 269 273 277 281 285 289 293 297 301 305 309 313 317 321 325 \
329 333 337 341 345 349 353 357 361 365 369 373 377 381 385 389 393 397 401 405 409 413 417 421 425 \
429 433 437 441 445 449 453 457 461 465 469 473 477 481 485 489 493 497 501 505 509 513 517 521 525 \
529 533 537 541 545 549 553 557 561 565 569 573 577 581 585 589 593 597 601 605 609 613 617 621 625 \
629 633 637 641 645 649 653 657 661 665 669 673 677 681 685 689 693 697 701 705 709 713 717 721 725 \
729 733 737 741 745 749 753 757 761 765 769 773 777 781 785 789 793 797 801 805 809 813 817 821 825 \
829 833 837 841 845 849 853 857 861 865 869 873 877 881 885 889 893 897 901 905 909 913 917 921 925 \
929 933 937 941 945 949 953 957 961 965 969 973 977 981 985 989 993 997 1001 1005 1009 1013 1017 1021 \
2 6 10 14 18 22 26 30 34 38 42 46 50 54 58 62 66 70 74 78 82 86 90 94 98 102 106 110 114 118 122 126 \
130 134 138 142 146 150 154 158 162 166 170 174 178 182 186 190 194 198 202 206 210 214 218 222 226 \
230 234 238 242 246 250 254 258 262 266 270 274 278 282 286 290 294 298 302 306 310 314 318 322 326 \
330 334 338 342 346 350 354 358 362 366 370 374 378 382 386 390 394 398 402 406 410 414 418 422 426 \
430 434 438 442 446 450 454 458 462 466 470 474 478 482 486 490 494 498 502 506 510 514 518 522 526 \
530 534 538 542 546 550 554 558 562 566 570 574 578 582 586 590 594 598 602 606 610 614 618 622 626 \
630 634 638 642 646 650 654 658 662 666 670 674 678 682 686 690 694 698 702 706 710 714 718 722 726 \
730 734 738 742 746 750 754 758 762 766 770 774 778 782 786 790 794 798 802 806 810 814 818 822 826 \
830 834 838 842 846 850 854 858 862 866 870 874 878 882 886 890 894 898 902 906 910 914 918 922 926 \
930 934 938 942 946 950 954 958 962 966 970 974 978 982 986 990 994 998 1002 1006 1010 1014 1018 1022 \
3 7 11 15 19 23 27 31 35 39 43 47 51 55 59 63 67 71 75 79 83 87 91 95 99 103 107 111 115 119 123 127 \
131 135 139 143 147 151 155 159 163 167 171 175 179 183 187 191 195 199 203 207 211 215 219 223 227 \
231 235 239 243 247 251 255 259 263 267 271 275 279 283 287 291 295 299 303 307 311 315 319 323 327 \
331 335 339 343 347 351 355 359 363 367 371 375 379 383 387 391 395 399 403 407 411 415 419 423 427 \
431 435 439 443 447 451 455 459 463 467 471 475 479 483 487 491 495 499 503 507 511 515 519 523 527 \
531 535 539 543 547 551 555 559 563 567 571 575 579 583 587 591 595 599 603 607 611 615 619 623 627 \
631 635 639 643 647 651 655 659 663 667 671 675 679 683 687 691 695 699 703 707 711 715 719 723 727 \
731 735 739 743 747 751 755 759 763 767 771 775 779 783 787 791 795 799 803 807 811 815 819 823 827 \
831 835 839 843 847 851 855 859 863 867 871 875 879 883 887 891 895 899 903 907 911 915 919 923 927 \
931 935 939 943 947 951 955 959 963 967 971 975 979 983 987 991 995 999 1003 1007 1011 1015 1019 1023


%define Copy 1024
%define Copy1 256
%define Copy2 512


submit = bindprocessor \$\$ $BIND; $command
copies = %{Copy}

parallel_setup =  %{Copy}
parallel_setup_type = fork
parallel_setup_prefork = bindprocessor $$ $BIND
parallel_test =  %{Copy}
parallel_test_submit = bindprocessor \$\$ $BIND; $command



#
# To navigate, "export GO=path" and use "ogo" instead of "go"
#              "export OGO_NO_WARN=0" to suppress path msg on every use
#
output_root=${top}/zPubAug10-795


#======================================================================
# Global Options apply to all runs
#======================================================================
#
# For just a report generated without a raw file or any runs required
# Do a "runspec --reportonly"   (also --action=report or --fakereport)
#
# Just set up the build or run directories, use --buildsetup or --setup
# on the runspec command

# Sets nobuild as the default - you will need -D to force a compile
#nobuild         = 1

# -D forces a build (recompile)
# -N prohibits a build (recompile)


%if '%{md}' eq 'build'
action          = build		# -a
%else
action          = validate	# -a
%endif
tune            = base,peak	# -T
iterations      = 3		# -n
#output_format   = all		# -o
output_format   = txt,csv,cfg	# -o
basepeak        = 0
reportable      = 1		# -l turns off
ignore_errors   = 0		# -I
mean_anyway     = 1
allow_extension_override = 1
ext             = AIX	# -e
size            = test,train,ref # -i



# These are the envionment variables that are set before the run
preenv		= 1
preENV_MALLOCOPTIONS=pool
preENV_MEMORY_AFFINITY=MCM
preENV_XLFRTEOPTS=intrinthds=1

%ifdef %{noVSX}
%define VSX
%define VMX
%else
%ifdef %{useVSX}
%define VSX -qenablevmx -qvecnvol
%define VMX -qenablevmx -qvecnvol
%else
%define VSX -qsimd -qvecnvol
%endif
%endif


# Control if the imbedded md5 string of compiler options is checked for
# recompile if the options have changed

%ifdef %{noMD5}
check_md5       = 0
%else
check_md5       = 1
%endif

# This is added to the MD5 sums, and must be 1 for submittable binaries.
# i.e. binaries made with this set to 0 will not be allowed to be used
# for submitable runs.  But it bypasses all checksums, so must be 0 if
# any sources are modified.  I am not yet sure if need this needs to be
# set to allow the generation of pmcount's PMU dir's
#strict_rundir_verify = 0


# Controls if the log file info is echo'd to the screen
teeout          = no

# If 1, make copy of the config file before modifing with MD5
# signitures of the compile options.
backup_config   = 0

# verbose -> -v
#verbose	= 1 to 99, 5 is default, 91 is good for debugging
#verbose	= 1

# Set up how parallel to do the compiles
%ifdef %{make_j}
makeflags       = -j%{make_j}
%endif

#--prevent log file lines that are too long for vi
log_line_width  = 180

# Point to where the usr/compiler/OS Flags file is
flagsurl000     = http://www.spec.org/cpu2006/flags/IBM-XL.20100901.xml
flagsurl001     = http://www.spec.org/cpu2006/flags/IBM-AIX.20100303.xml

CC_PATH         = /usr/vac/bin
CXX_PATH        = /usr/vacpp/bin
XLF_PATH        = /usr/bin

#===============================================================================
# How the compilers are called
# The settings used here are for IBM C/C++ and xl Fortran compilers
#===============================================================================
default=default=default=default:

CC      = $(CC_PATH)/xlc -qlanglvl=extc99
CXX     = $(CXX_PATH)/xlC
FC      = $(XLF_PATH)/xlf95

#===============================================================================
#======================================================================
# Base Level Optimizations
#   No limit to number of flags, must be same for all of each Language.
#======================================================================

%define LPC -qlargepage
%define LPL -blpdata
%define LP64L -bdatapsize:64K -bstackpsize:64K -btextpsize:64K
%define LPT64L -btextpsize:64K
%define IPAC -qipa=noobject
%define IPAL -qipa=threads
%define ILS -D_ILS_MACROS
%define O2 -O2 -qarch=auto -qtune=auto
%define O3 -O3 -qarch=auto -qtune=auto
%define O4 -O4
%define O5 -O5

%define c_suppress
%define cxx_suppress
%define f_suppress -qsuppress=cmpmsg:1500-010
%define ld_suppress -qsuppress=1500-036

EXTRA_CFLAGS   = %{c_suppress}
EXTRA_CXXFLAGS = %{cxx_suppress}
EXTRA_FFLAGS   = %{f_suppress}

OPTIMIZE       = %{O5} %{LPC} %{IPAC}

default=base=default=default:
sw_base_ptrsize = 32-bit
# LDOPT is only good for non FDO builds, so only use for base
EXTRA_LDFLAGS  = %{ld_suppress}
LDOPT          = %{LPL}

int=base=default=default:
COPTIMIZE      = %{O5} %{VSX} %{ILS} -qalias=noansi -qalloca
CXXOPTIMIZE    = %{O5} %{ILS} -qrtti=all -D__IBM_FAST_SET_MAP_ITERATOR
LDCFLAGS       = %{IPAL} -bmaxdata:0x50000000
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x20000000

fp=base=default=default:
COPTIMIZE      = %{O4} %{ILS}
FOPTIMIZE      = %{O4} -qsmallstack=dynlenonheap -qalias=nostd
CXXOPTIMIZE      = %{O4}  %{ILS} -qrtti=all -D__IBM_FAST_VECTOR -D__IBM_FAST_SET_MAP_ITERATOR
LDCFLAGS       = %{IPAL} -bmaxdata:0x40000000
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x50000000
LDFFLAGS       = %{IPAL} -bmaxdata:0x60000000

#======================================================================
# INT Portability Flags
#     no optimizations allowed here
#======================================================================

400.perlbench=default=default=default:
CPORTABILITY   = -DSPEC_CPU_AIX

462.libquantum=default=default=default:
CPORTABILITY   = -DSPEC_CPU_AIX

464.h264ref=default=default=default:
CPORTABILITY   = -DSPEC_CPU_AIX -qchars=signed

483.xalancbmk=default=default=default:
CXXPORTABILITY = -DSPEC_CPU_AIX

#======================================================================
# FP  Portability Flags
#     no optimizations allowed here
#======================================================================

410.bwaves=default=default=default:
FPORTABILITY   = -qfixed

416.gamess=default=default=default:
FPORTABILITY   = -qfixed

434.zeusmp=default=default=default:
FPORTABILITY   = -qfixed

435.gromacs=default=default=default:
FPORTABILITY   = -qfixed -qextname

436.cactusADM=default=default=default:
FPORTABILITY   = -qfixed -qextname

437.leslie3d=default=default=default:
FPORTABILITY   = -qfixed

454.calculix=default=default=default:
FPORTABILITY   = -qfixed -qextname

481.wrf=default=default=default:
CPORTABILITY   = -DSPEC_CPU_AIX -DNOUNDERSCORE

482.sphinx3=default=default=default:
CPORTABILITY   = -qchars=signed

#======================================================================
#
# Default peak flags.
#
#======================================================================

default=peak=default=default:
sw_peak_ptrsize = 32/64-bit
EXTRA_LDFLAGS  = %{LPL} %{LPT64L} %{ld_suppress}

%define FDPRCOMP
%define FDPRSAVE mv $baseexe ${baseexe}.orig;


#======================================================================
# INT peak Flags
#======================================================================

400.perlbench=peak=default=default:
# C only Benchmark
# Multiple training inputs
OPTIMIZE       = %{O2}
COPTIMIZE      = %{ILS} -qalias=noansi %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
LDCFLAGS       = %{IPAL} -bmaxdata:0x50000000
%else
LDCFLAGS       = %{IPAL}
CPORTABILITY   = -DSPEC_CPU_AIX -DSPEC_CPU_LP64
%endif


401.bzip2=peak=default=default:
# C only Benchmark
# Multiple training inputs
OPTIMIZE       = %{O5} %{VSX} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
LDCFLAGS       = %{IPAL} -bmaxdata:0x50000000
%else
LDCFLAGS       = %{IPAL}
%endif
%define FDPROPTS -O4 -sdp 9 -rtb -vrox -nodp -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
%undef FDPROPTS

403.gcc=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O3} %{LPC}
COPTIMIZE      = %{ILS} -qalloca %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS  -O3 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
%undef FDPROPTS
%ifndef %{64}
LDCFLAGS       = %{IPAL} -bmaxdata:0x50000000
%else
CPORTABILITY   = -DSPEC_CPU_LP64
LDCFLAGS       = %{IPAL}
%endif

429.mcf=peak=default=default:
# C only Benchmark
copies = %{Copy2}
OPTIMIZE       = %{O5} %{VSX} %{LPC} %{IPAC}
COPTIMIZE       = %{ILS} %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
LDCFLAGS       = %{IPAL} -bmaxdata:0x50000000
%else
LDCFLAGS       = %{IPAL}
%endif
%define FDPROPTS  -O3 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
%undef FDPROPTS


445.gobmk=peak=default=default:
# C only Benchmark
# Multiple training inputs
OPTIMIZE       = %{O5} %{VSX} %{LPC} %{IPAC}
COPTIMIZE      =  %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS  -O3 -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
%undef FDPROPTS


456.hmmer=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5} %{VSX} %{IPAC} -qassert=refalign
COPTIMIZE      =  %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
%define FDPROPTS -O3 -lu -1 -nodp -sdp 9 -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
%undef FDPROPTS


458.sjeng=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS  -O3 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
%undef FDPROPTS


462.libquantum=peak=default=default:
# C only Benchmark
copies = %{Copy2}
OPTIMIZE       = %{O5} -q64 %{LPC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
%define FDPROPTS -O4 -nodp -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
%undef FDPROPTS

464.h264ref=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O5} %{VSX} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2


471.omnetpp=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O4}
CXXOPTIMIZE    = %{ILS} %{FDPRCOMP} -qalign=natural -qrtti=all -qinlglue -D__IBM_FAST_SET_MAP_ITERATOR
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x20000000
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O4 -nodp -m power7 -vrox
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
%undef FDPROPTS

473.astar=peak=default=default:
# C++ Benchmark
# Multiple training inputs
OPTIMIZE       = %{O4} %{LPC} %{IPAC}
CXXOPTIMIZE    = %{ILS} %{FDPRCOMP} -qinlglue -qalign=natural
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x20000000
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O4 -sdp 9 -vrox -dp -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
%undef FDPROPTS

483.xalancbmk=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O4} %{VSX} -qarch=pwr5 -qtune=pwr5 %{LPC} %{IPAC}
CXXOPTIMIZE    = %{ILS} %{FDPRCOMP} -qinlglue -D__IBM_FAST_VECTOR
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x20000000
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2

999.specrand=peak=default=default:
# C only Benchmark - Must run, but not reported unless fails
COPTIMIZE      = %{ILS}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O4 -sdp 9 -vrox -rtb -nodp -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_999_1 = fdpr binary optimization tool used for 999.specrand
notes_peak_fdpr_999_2 =  with options %{FDPROPTS}
%undef FDPROPTS


#======================================================================
# FP peak Flags
#======================================================================

410.bwaves=peak=default=default:
# Fortran Benchmark
copies = %{Copy1}
%define 64
OPTIMIZE       = %{O4}  %{LPC} %{IPAC}
%ifndef %{64}
FOPTIMIZE      = %{FDPRCOMP} -qsmallstack=dynlenonheap
LDFFLAGS       = %{IPAL} -bmaxdata:0x50000000
%else
FOPTIMIZE      = -q64 %{FDPRCOMP}
LDFFLAGS       = %{IPAL}
%endif
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%undef 64
%define FDPROPTS -O4 -sdp 9 -vrox -m power7 -kr
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_410_1 = fdpr binary optimization tool used for 410.bwaves
notes_peak_fdpr_410_2 =  with options %{FDPROPTS}
%undef FDPROPTS

416.gamess=peak=default=default:
# Fortran Benchmark
OPTIMIZE       = %{O5} %{VSX} -qarch=pwr5 %{LPC} %{IPAC}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
FOPTIMIZE      = -qalias=nostd
LDFFLAGS       = %{IPAL} -bmaxdata:0x40000000
%else
FOPTIMIZE      = -q64 -qalias=nostd
LDFFLAGS       = %{IPAL}
%endif


433.milc=peak=default=default:
# C only Benchmark
copies = %{Copy1}
OPTIMIZE       = %{O5} %{VSX} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} -qrestrict -qprefetch=aggressive -qalign=natural %{FDPRCOMP}
LDCFLAGS       = %{IPAL} -bmaxdata:0x40000000
%define FDPROPTS -O3 -lu -1 -nodp -sdp 9 -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_433_1 = fdpr binary optimization tool used for 433.milc
notes_peak_fdpr_433_2 =  with options %{FDPROPTS}
%undef FDPROPTS

434.zeusmp=peak=default=default:
# Fortran Benchmark
OPTIMIZE       = %{O3} %{LPC}
FOPTIMIZE      = -qxlf90=nosignedzero %{FDPRCOMP}
LDFFLAGS       =  -bmaxdata:0x40000000
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -RD -O4 -sdp 9 -vrox -nodp -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_434_1 = fdpr binary optimization tool used for 434.zeusmp
notes_peak_fdpr_434_2 =  with options %{FDPROPTS}
%undef FDPROPTS


435.gromacs=peak=default=default:
# Fortran & C Benchmark
OPTIMIZE       = %{O4} %{VSX} %{IPAC}
LDFFLAGS       = %{IPAL}
FOPTIMIZE      = %{FDPRCOMP}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -lu -1 -nodp -sdp 9 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_435_1 = fdpr binary optimization tool used for 435.gromacs
notes_peak_fdpr_435_2 =  with options %{FDPROPTS}
%undef FDPROPTS

436.cactusADM=peak=default=default:
# Fortran & C Benchmark
copies = %{Copy2}
%define 64
OPTIMIZE       = %{O4} -q64 %{VSX}  %{IPAC}
%ifndef %{64}
LDFFLAGS       = %{IPAL} -bmaxdata:0x60000000
%else
LDFFLAGS       = %{IPAL}
FPPPORTABILITY = -DSPEC_CPU_LP64
%endif
%undef 64
COPTIMIZE      = %{ILS} %{FDPRCOMP} -qnostrict
FOPTIMIZE      = %{FDPRCOMP} -qnostrict
%define FDPROPTS -O3 -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_436_1 = fdpr binary optimization tool used for 436.cactusADM
notes_peak_fdpr_436_2 =  with options %{FDPROPTS}
%undef FDPROPTS


437.leslie3d=peak=default=default:
# Fortran Benchmark
copies = %{Copy1}
OPTIMIZE       = %{O5}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
FOPTIMIZE      = %{FDPRCOMP}
%define FDPROPTS -O4 -sdp 9 -vrox -rtb -nodp -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_437_1 = fdpr binary optimization tool used for 437.leslie3d
notes_peak_fdpr_437_2 =  with options %{FDPROPTS}
%undef FDPROPTS


444.namd=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O5} %{VSX} %{LPC} %{IPAC}
CXXOPTIMIZE    = %{ILS}
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O3 -lu -1 -nodp -sdp 9 -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_444_1 = fdpr binary optimization tool used for 444.namd
notes_peak_fdpr_444_2 =  with options %{FDPROPTS}
%undef FDPROPTS


447.dealII=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O4} %{IPAC}
CXXOPTIMIZE    = %{ILS} -qrtti=all -D__IBM_FAST_VECTOR -D__IBM_FAST_SET_MAP_ITERATOR
LDCXXFLAGS     = %{IPAL} -bmaxdata:0x50000000
%define FDPROPTS -O4 -sdp 9 -vrox -m power7 -RD -dp
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_447_1 = fdpr binary optimization tool used for 447.dealII
notes_peak_fdpr_447_2 =  with options %{FDPROPTS}
%undef FDPROPTS


450.soplex=peak=default=default:
# C++ Benchmark
# Multiple training inputs
copies = %{Copy2}
OPTIMIZE       = %{O3} -q64 %{LPC}
CXXOPTIMIZE    = %{ILS} %{FDPRCOMP}
LDCXXFLAGS     = -bmaxdata:0x40000000
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O4 -sdp 9 -vrox -kr -m power7
fdo_pre2   = rm -f $baseexe.nprof $baseexe.instr; fdpr -1 -q -p $baseexe
fdo_run2   = fdpr -2 -q -p $commandexe -x $command
fdo_post2  = fdpr -3 -q %{FDPROPTS} -p $baseexe;  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_450_1 = fdpr binary optimization tool used for 450.soplex
notes_peak_fdpr_450_2 =  with options %{FDPROPTS}
%undef FDPROPTS


453.povray=peak=default=default:
# C++ Benchmark
OPTIMIZE       = %{O5} -q64 %{VSX} %{LPC} %{IPAC}
CXXOPTIMIZE    = %{ILS} -qalign=natural %{FDPRCOMP}
LDCXXFLAGS     = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CXXFLAGS = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CXXFLAGS = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O4 -sdp 9 -vrox -rtb -nodp -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -tb -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_453_1 = fdpr binary optimization tool used for 453.povray
notes_peak_fdpr_453_2 =  with options %{FDPROPTS}
%undef FDPROPTS

454.calculix=peak=default=default:
# Fortran & C Benchmark
OPTIMIZE       = %{O5} %{VSX}  %{LPC} %{IPAC}
FOPTIMIZE      = %{FDPRCOMP}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDFFLAGS       = %{IPAL}
%define FDPROPTS -O4 -sdp 9 -vrox -rtb -nodp -m power7
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_454_1 = fdpr binary optimization tool used for 454.calculix
notes_peak_fdpr_454_2 =  with options %{FDPROPTS}
%undef FDPROPTS

459.GemsFDTD=peak=default=default:
# Fortran Benchmark
copies = %{Copy1}
OPTIMIZE       = %{O3} %{LPC}
FOPTIMIZE      = %{FDPRCOMP}
LDFFLAGS       = -bmaxdata:0x50000000

465.tonto=peak=default=default:
# Fortran Benchmark
OPTIMIZE       = %{O5} %{VSX} %{IPAC}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_FFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_FFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%ifndef %{64}
LDFFLAGS       = %{IPAL} -bmaxdata:0x50000000
%endif

470.lbm=peak=default=default:
# C Benchmark
copies = %{Copy1}
OPTIMIZE       = %{O5} %{LPC}
LDCFLAGS       = %{IPAL} -bmaxdata:0x30000000
COPTIMIZE      = %{ILS} %{FDPRCOMP}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -kr -O4 -sdp 9 -vrox -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_470_1 = fdpr binary optimization tool used for 470.lbm
notes_peak_fdpr_470_2 =  with options %{FDPROPTS}
%undef FDPROPTS

481.wrf=peak=default=default:
# Fortran & C-for netCDF Benchmark
OPTIMIZE       = %{O3} %{VSX}
LDFFLAGS       = -bmaxdata:0x30000000
FOPTIMIZE      = %{FDPRCOMP}
COPTIMIZE      = %{ILS} %{FDPRCOMP}

482.sphinx3=peak=default=default:
# C only Benchmark
OPTIMIZE       = %{O4} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
fdo_pre0       = ${CC_PATH}/cleanpdf
PASS1_CFLAGS   = -qpdf1
PASS1_LDFLAGS  = -qpdf1
PASS2_CFLAGS   = -qpdf2
PASS2_LDFLAGS  = -qpdf2
%define FDPROPTS -O4 -nodp -m power7 -vrox
fdo_pre2       = rm -f $baseexe.nprof $baseexe.instr
fdo_run2       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post2      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_482_1 = fdpr binary optimization tool used for 482.sphinx3
notes_peak_fdpr_482_2 =  with options %{FDPROPTS}
%undef FDPROPTS

998.specrand=peak=default=default:
# C only Benchmark - Must run, but not reported unless fails
copies = %{Copy1}
OPTIMIZE       = %{O5} %{LPC} %{IPAC}
COPTIMIZE      = %{ILS} %{FDPRCOMP}
LDCFLAGS       = %{IPAL}
%define FDPROPTS -O4 -sdp 9 -vrox -rtb -nodp -m power7
fdo_pre1       = rm -f $baseexe.nprof $baseexe.instr
fdo_run1       = fdpr -q %{FDPROPTS} -p $commandexe -x $command
fdo_post1      =  %{FDPRSAVE} cp ${baseexe}.fdpr $baseexe
notes_peak_fdpr_998_1 = fdpr binary optimization tool used for 998.specrand
notes_peak_fdpr_998_2 =  with options %{FDPROPTS}
%undef FDPROPTS

#===============================================================================
# Report requirements
#===============================================================================
default=default=default=default:
notes_submit_000        = The config file option 'submit' was used
notes_submit_005        = to assign benchmark copy to specific kernel thread using
notes_submit_010        = the "bindprocessor" command (see flags file for details).


test_sponsor		= IBM Corporation
license_num		= 11
tester			= IBM Corporation
hw_avail		= Sep-2010

hw_vendor		= IBM Corporation

hw_cpu_mhz              = 4004

hw_fpu			= Integrated
hw_pcache		= 32 KB I + 32 KB D on chip per core
hw_scache		= 256 KB I+D on chip per core
hw_tcache		= 4 MB I+D on chip per core
hw_ocache		= None
hw_other		= None

hw_cpu_name             = POWER7
hw_ncoresperchip        = 8
hw_nthreadspercore      = 4

hw_model                = IBM Power 795 (4.0 GHz, 256 core)
hw_memory               = 2 TB (256x8 GB) DDR3 1066 MHz
hw_ncpuorder            = 32,64,96,128,160,192,224,256 cores
hw_ncores               = 256
hw_nchips               = 32
notes_os_005 =  MALLOCOPTIONS = "pool"
notes_os_010 =  MEMORY_AFFINITY = "MCM"
notes_os_015 =  XLFRTEOPTS = "intrinthds=1"
notes_os_020 =
notes_os_025 =All ulimits set to unlimited.
notes_os_030 =102400 16M large pages defined with vmo command
notes_os_035 =
notes_os_040 =See the flags file for details on settings.
hw_disk			= 42x146.8 GB Raid0 SAS SFF 15K RPM

sw_file			= AIX/JFS2
sw_state		= Multi-user

sw_avail		= Sep-2010
sw_os                   = IBM AIX V7.1
sw_compiler000          = IBM XL C/C++ for AIX, V11.1
sw_compiler001          = Version: 11.01.0000.0002
sw_other		= None
fp=default=default=default:
sw_compiler11           = IBM XL Fortran for AIX, V13.1 (5724-X15)
sw_compiler12		= Version: 13.01.0000.0002
sw_other		= None
default=default=default=default:

notes_os_000 =Environment variables set by runspec before the start of the run:
default=default=default=default:




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
hw_cpu_char000 = Intelligent Energy Optimization
default:
hw_cpu_char001 = enabled, up to 4.14 GHz
notes_peak_fdpr_000 = fdpr binary optimization tool used for 401.bzip2
notes_peak_fdpr_005 =  with options -O4 -sdp 9 -rtb -vrox -nodp -m power7
notes_peak_fdpr_010 = fdpr binary optimization tool used for 403.gcc 429.mcf 445.gobmk 458.sjeng
notes_peak_fdpr_015 =  with options -O3 -m power7
notes_peak_fdpr_020 = fdpr binary optimization tool used for 456.hmmer
notes_peak_fdpr_025 =  with options -O3 -lu -1 -nodp -sdp 9 -m power7
notes_peak_fdpr_030 = fdpr binary optimization tool used for 462.libquantum
notes_peak_fdpr_035 =  with options -O4 -nodp -m power7
notes_peak_fdpr_040 = fdpr binary optimization tool used for 471.omnetpp
notes_peak_fdpr_045 =  with options -O4 -nodp -m power7 -vrox
notes_peak_fdpr_050 = fdpr binary optimization tool used for 473.astar
notes_peak_fdpr_055 =  with options -O4 -sdp 9 -vrox -dp -m power7