CPU2006 license: | 9001 | Test date: | Dec-2011 |
---|---|---|---|
Test sponsor: | Itautec | Hardware Availability: | Jul-2011 |
Tested by: | Itautec | Software Availability: | Dec-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon X5675 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.46 GHz |
CPU MHz: | 3067 |
FPU: | Integrated |
CPU(s) enabled: | 6 cores, 1 chip, 6 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 12 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 24 GB (6 x 4 GB 2Rx4 PC3-10600R-9, ECC) |
Disk Subsystem: | 146 GB, SAS, 15000 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server Release 6.2, 2.6.32-220.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0 of Intel Compiler XE Build 20111011 |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V8.1 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 12 | 725 | 162 | 724 | 162 | 723 | 162 | 12 | 615 | 191 | 615 | 191 | 617 | 190 |
401.bzip2 | 12 | 1015 | 114 | 1017 | 114 | 1015 | 114 | 12 | 974 | 119 | 975 | 119 | 975 | 119 |
403.gcc | 12 | 755 | 128 | 749 | 129 | 745 | 130 | 12 | 746 | 130 | 756 | 128 | 746 | 129 |
429.mcf | 12 | 459 | 238 | 461 | 237 | 458 | 239 | 12 | 459 | 238 | 461 | 237 | 458 | 239 |
445.gobmk | 12 | 703 | 179 | 704 | 179 | 710 | 177 | 12 | 672 | 187 | 673 | 187 | 674 | 187 |
456.hmmer | 12 | 469 | 239 | 468 | 239 | 469 | 239 | 6 | 204 | 274 | 204 | 274 | 204 | 274 |
458.sjeng | 12 | 833 | 174 | 834 | 174 | 834 | 174 | 12 | 781 | 186 | 780 | 186 | 779 | 186 |
462.libquantum | 12 | 198 | 1260 | 198 | 1250 | 198 | 1250 | 12 | 198 | 1260 | 198 | 1250 | 198 | 1250 |
464.h264ref | 12 | 1080 | 246 | 1055 | 252 | 1055 | 252 | 12 | 1040 | 255 | 1061 | 250 | 1053 | 252 |
471.omnetpp | 12 | 628 | 120 | 624 | 120 | 629 | 119 | 12 | 602 | 125 | 603 | 124 | 602 | 125 |
473.astar | 12 | 717 | 117 | 719 | 117 | 719 | 117 | 12 | 717 | 117 | 719 | 117 | 719 | 117 |
483.xalancbmk | 12 | 408 | 203 | 407 | 203 | 407 | 203 | 12 | 408 | 203 | 407 | 203 | 407 | 203 |
The config file option 'submit' was used. numactl was used to bind copies to the cores
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run. Large pages were not enabled for this run
Data Reuse disabled in BIOS.
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |