# Invocation command line: # /root/work/cpu2006v1.2/bin/runspec -c amd1206de-rate-revA.cfg --define btype=int --tune all int # output_root was not used for this run ############################################################################ # AMD1206 SPEC CPU2006 V1.2 Rate Configuration File for 64-bit Linux # # # CPU2006 Version 1.2 # Compiler name/version: Open64 4.5.2 # Operating system version: 64-bit Linux # Hardware: AMD Opteron 33xx # FP Base Pointer Size: 64-bit only # FP Peak Pointer Size: 32/64-bit # INT Base Pointer Size: 32/64-bit # INT Peak Pointer Size: 32/64-bit # Auto Parallization: No # # Important! Please run with your stack size set to 'unlimited'. # Failure to do so may cause some benchmarks to get a stack # overflow during execution. # Using csh: unlimit # Using bash: ulimit -s unlimited # # Your LD_LIBRARY_PATH must be set to the location of the dependent # runtime libraries. (Though this should be taken care of by the # preENV_LD_LIBRARY_PATH found in the AMD1206ad-rate-revX.inc file.) # This line should be commented out during builds. # ##################################################################### ext = amd1206-rate-revA # If you are going to recompile these binaries, please choose a new # extension to avoid confusion with the current binary set on your # system and during the SPEC submission review process. You will also # need to set fail_build = 0 below. fail_build = 1 ignore_errors = no tune = base,peak output_format = all flagsurl000 = http://www.spec.org/cpu2006/flags/x86-open64-452-flags-rate-revA-II.xml #flagsurl = $[top]/x86-open64-452-flags-rate-revA-II.xml \ # $[top]/amd1206-INVALID-platform-rate-revA-I.xml size = test,train,ref check_md5 = yes reportable = yes env_vars = no teeout = yes mean_anyway = yes teerunout = yes post_setup = sync rate = 1 sysinfo_program = specperl $[top]/Docs/sysinfo-rev6818 -f -p #################################################################### # Include file containing the commonly changed fields #################################################################### %define inc_file_name AMD1206de-rate-revA.inc #include: %{inc_file_name} # ----- Begin inclusion of 'AMD1206de-rate-revA.inc' ############################################################################ ##################################################################### # Paths ##################################################################### # Set location of run time libraries for runs. preENV_LD_LIBRARY_PATH = $[top]/amd1206-rate-libs-revA/32:$[top]/amd1206-rate-libs-revA/64 # Set this path to your SmartHeap Library for builds. SMARTHEAP_DIR = /root/work/libraries/SmartHeap-10/lib ##################################################################### # Machine Specific Settings ##################################################################### # If your machine orders nodes sequentially and your using 8GB # memory sticks, most settings should be correctly configured # based on the below three settings. See Readme.amd1206de-rate-revA # for more information. # How many cores does your system have? (4 or 8) %define cores_per_socket 8 # Approximately how much memory (in GB) do you have in your system? # (8, 16, 32, 64) # If between two values round down, and if over 64GB choose 64. If you # dont have these exact amounts of memory installed the "Memory" description # line below will need to be updated. %define memory_size 32 ######################################################################## # You should not need to change anything in this section unless you have # a non-standard configuration. See Readme.amd1206de-rate-revA for more # information. ######################################################################## %if !('%{btype}' eq 'int' || '%{btype}' eq 'fp') % error The runspec line must include "--define btype=fp" or "--define btype=int" which specifies the type of benchmarks being run. See Readme.amd1206de-rate-revA for more information. This error was generated %endif ## For 1 socket systems and small core count processors, the OS uses much more memory per node/copy, thus the memory requirements are higher than the nomal min of 2GB/core, and the ## GB_mem_per_core is intentionally set lower to avoid swapping %if '%{cores_per_socket}' eq '8' % define cores_per_node 8 % define total_I_cache 256 % if ('%{memory_size}' eq '8' || '%{memory_size}' eq '16') % error These SPEC CPU binaries require at least 32GB of system memory for this CPU, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement. This error was generated % elif ('%{memory_size}' eq '32') % define GB_mem_per_core 3 % define mem_sticks 4 % define num_system_huge_pages 3840 % elif ('%{memory_size}' eq '64') % define GB_mem_per_core 4 % define mem_sticks 8 % define num_system_huge_pages 7168 % else % error Please define "memory_size" to a valid value in %{inc_file_name}. This error was generated % endif #memory_size %elif '%{cores_per_socket}' eq '4' % define cores_per_node 4 % define total_I_cache 128 % if ('%{memory_size}' eq '8') % error These SPEC CPU binaries require at least 16GB of system memory for this CPU, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement. This error was generated % elif ('%{memory_size}' eq '16') % define GB_mem_per_core 2 % define mem_sticks 2 % define num_system_huge_pages 0 % elif ('%{memory_size}' eq '32') % define GB_mem_per_core 4 % define mem_sticks 4 % define num_system_huge_pages 3584 % elif ('%{memory_size}' eq '64') % define GB_mem_per_core 4 % define mem_sticks 8 % define num_system_huge_pages 3584 % else % error Please define "memory_size" to a valid value in %{inc_file_name}. This error was generated % endif #memory_size %else % error Please define "cores_per_socket" to a valid value in %{inc_file_name}. This error was generated %endif #cores_per_socket %if ('%{num_system_huge_pages}' eq '0') % define thp_setting enabled %else % define thp_setting disabled %endif #cores_per_socket %define total_L2_cache %{cores_per_socket} %warning Recommended %{btype} huge page setting: %{num_system_huge_pages} system huge pages; THP %{thp_setting} (only applies to RHEL). This message was generated #################################################################### # Tester information #################################################################### license_num = 49 prepared_by = AMD Performance Lab tester = Advanced Micro Devices test_sponsor = Advanced Micro Devices hw_vendor = MSI hw_model000 = MSI MS0231, hw_model001 = AMD Opteron 3365 #################################################################### # Hardware information #################################################################### hw_avail = Mar-2013 hw_cpu_name = AMD Opteron 3365 hw_cpu_char = AMD Turbo CORE technology up to 3.30 GHz hw_cpu_mhz = 2300 hw_fpu = Integrated hw_nchips = 1 hw_ncores = 8 hw_ncoresperchip = 8 hw_nthreadspercore = 1 hw_ncpuorder = 1 chip hw_pcache000 = 256 KB I on chip per chip, hw_pcache001 = 64 KB I shared / 2 cores; hw_pcache002 = 16 KB D on chip per core hw_scache = 8 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 8 MB I+D on chip per chip hw_ocache = None hw_disk = 1 x 500 GB SATA, 7200 RPM hw_memory = 32 GB (4 x 8 GB 2Rx4 PC3-10600U-9, ECC) hw_other = None sw_file = ext3 sw_os000 = Red Hat Enterprise Linux Server Release 6.3, sw_os001 = Kernel 2.6.32-279.el6.x86_64 sw_state = Run level 3 (Full multiuser with network) ##################################################################### # Notes ##################################################################### notes_020 =The x86 Open64 Compiler Suite is only available from (and supported by) AMD at notes_025 =http://developer.amd.com/cpu/open64 notes_030 = notes_035 =Binaries were compiled on a system with 2x AMD Opteron 6386SE chips + 128GB Memory using RHEL 6.3 notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_os_000 ='ulimit -s unlimited' was used to set environment stack size notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit %if ('%{thp_setting}' eq 'enabled') notes_os_010 = notes_os_015 =Transparent huge pages were enabled for this run (OS default) %elif ('%{thp_setting}' eq 'disabled') notes_os_010 = notes_os_015 =Set transparent_hugepage=never as a boot parameter in /boot/grub/menu.lst %else % warning Transparent huge pages define not set properly, so its setting was not included in this run's documentation. This error was generated %endif #thp_setting %if '%{num_system_huge_pages}' ne '0' notes_os_020 = notes_os_025 =Set vm/nr_hugepages=3840 in /etc/sysctl.conf notes_os_030 =mount -t hugetlbfs nodev /mnt/hugepages %else notes_os_020 = notes_os_025 =Huge pages were not configured for this run. notes_os_030 = %endif #num_system_huge_pages # Uncomment if randomize_va was disabled (should only be set when testing with RHEL 6.1) #notes_os_035 =Set kernel/randomize_va_space=0 in /etc/sysctl.conf # ---- End inclusion of '/root/work/cpu2006v1.2/config/AMD1206de-rate-revA.inc' #################################################### # Auto-configured settings based on your .inc file # #################################################### %if '%{GB_mem_per_core}' eq '4' preENV_HUGETLB_LIMIT = 896 %elif '%{GB_mem_per_core}' eq '3' preENV_HUGETLB_LIMIT = 480 %elif '%{GB_mem_per_core}' eq '2' #No huge pages should be configured, so do nothing %endif #GB_mem_per_core bind0 = numactl -m 0 --physcpubind=0 bind1 = numactl -m 0 --physcpubind=1 bind2 = numactl -m 0 --physcpubind=2 bind3 = numactl -m 0 --physcpubind=3 bind4 = numactl -m 0 --physcpubind=4 bind5 = numactl -m 0 --physcpubind=5 bind6 = numactl -m 0 --physcpubind=6 bind7 = numactl -m 0 --physcpubind=7 copies = %{cores_per_socket} ################################ # End auto-configured settings # ################################ submit = echo "$command" > run.sh ; $BIND bash run.sh ############################ Software Info ############################ fp=default=default=default: sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit sw_avail = Aug-2012 sw_compiler = C/C++/Fortran: Version 4.5.2 of x86 Open64 Compiler Suite (from AMD) sw_other = None int=default=default=default: sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_avail = Aug-2012 sw_compiler000 = C/C++: Version 4.5.2 of x86 Open64 Compiler Suite sw_compiler001 = (from AMD) sw_other = SmartHeap 10.0 32-bit Library for Linux default=default=default=default: ##################################################################### # Compiler selection # # CC = opencc CXX = openCC FC = openf95 ##################################################################### # Portability for default 64-bit code generation ##################################################################### default=default=default: PORTABILITY = -DSPEC_CPU_LP64 ##################################################################### # INT Portability ##################################################################### 400.perlbench=default=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=peak=default: # Needed to avoid -DSPEC_CPU_LP64 since peak is built with -m32 PORTABILITY = 429.mcf=peak=default: # Needed to avoid -DSPEC_CPU_LP64 since peak is built with -m32 PORTABILITY = 462.libquantum=default=default: CPORTABILITY = -DSPEC_CPU_LINUX 471.omnetpp=default=default: # Needed to avoid -DSPEC_CPU_LP64 since it is built with -m32 PORTABILITY = 473.astar=base=default: # Needed to avoid -DSPEC_CPU_LP64 since base is built with -m32 PORTABILITY = 483.xalancbmk=default=default: CXXPORTABILITY = -DSPEC_CPU_LINUX # Needed to avoid -DSPEC_CPU_LP64 since it is built with -m32 PORTABILITY = ################################################################# # # # SPECint Tuning & Notes # # # ################################################################# int=base: COPTIMIZE = -Ofast -CG:local_sched_alg=1 -INLINE:aggressive=ON -IPA:plimit=8000:small_pu=100 -HP:bd=2m:heap=2m -mso -LNO:prefetch=2 -march=bdver1 CXXOPTIMIZE = -Ofast -m32 -INLINE:aggressive=on -CG:cmp_peep=on -D__OPEN64_FAST_SET -march=bdver1 EXTRA_CXXLIBS = -L$(SMARTHEAP_DIR) -lsmartheap sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit ##################################################################### # INT Peak Tuning ##################################################################### int=peak=default: COPTIMIZE = -Ofast -CG:local_sched_alg=1 -HP:bdt=2m:heap=2m CXXOPTIMIZE = -Ofast -m32 -HP:bdt=2m:heap=2m -D__OPEN64_FAST_SET PASS1_CFLAGS = -fb_create fbdata PASS1_CXXFLAGS = -fb_create fbdata PASS1_LDFLAGS = -fb_create fbdata PASS2_CFLAGS = -fb_opt fbdata PASS2_CXXFLAGS = -fb_opt fbdata PASS2_LDFLAGS = -fb_opt fbdata 400.perlbench=peak=default: COPTIMIZE = -Ofast -LNO:prefetch=2:opt=0 -IPA:plimit=20000 -OPT:unroll_times_max=8:unroll_size=256:unroll_level=2:keep_ext=on -WOPT:if_conv=0:sib=on -CG:local_sched_alg=1:unroll_fb_req=on:movext_icmp=off -HP:bd=2m:heap=2m -march=bdver1 -GRA:aggr_loop_splitting=off -GRA:loop_splitting=off 401.bzip2=peak=default: COPTIMIZE = -O3 -LNO:prefetch=2:pf2=0 -OPT:alias=disjoint:goto=off -CG:local_sched_alg=1 -HP:bdt=2m:heap=2m -march=bdver2 403.gcc=peak=default: COPTIMIZE = -Ofast -LNO:trip_count=256 -CG:cmp_peep=on:pre_minreg_level=2 -m32 -HP:bdt=2m:heap=2m -GRA:unspill=on -IPA:small_pu=200 -WOPT:sib=on -march=bdver2 -mno-fma4 429.mcf=peak=default: COPTIMIZE = -O3 -OPT:unroll_times_max=5 -ipa -INLINE:aggressive=on -CG:gcm=off:dsched=on -GRA:prioritize_by_density=on -m32 -HP:bdt=2m:heap=2m -mso -march=bdver1 feedback = 0 445.gobmk=peak=default: COPTIMIZE = -Ofast -OPT:unroll_size=256:unroll_times_max=8:keep_ext=on -IPA:plimit=750:min_hotness=300:pu_reorder=1 -LNO:ignore_feedback=off -WOPT:if_conv=2 -HP:bd=2m:heap=2m -march=bdver1 456.hmmer=peak=default: COPTIMIZE = -Ofast -LNO:prefetch=2 -OPT:alias=disjoint:unroll_times_max=16:unroll_size=512:unroll_level=2:keep_ext=on -CG:cflow=0:cmp_peep=on:pre_local_sched=off -HP:bdt=2m:heap=2m -CG:cmp_peep=on:p2align=0:load_exe=3:dsched=on -march=bdver1 458.sjeng=peak=default: COPTIMIZE = -Ofast -CG:ptr_load_use=0:divrem_opt=on:movext_icmp=off:locs_best=on -LNO:full_unroll=10 -IPA:pu_reorder=2 -HP:heap=2m:bd=2m -WOPT:sib=on -march=bdver1 462.libquantum=peak=default: COPTIMIZE = -Ofast -mso -OPT:unroll_size=512:unroll_times_max=16 -LNO:prefetch=2:prefetch_ahead=4:pf2=0 -CG:local_sched_alg=1:p2align=0 -INLINE:aggressive=ON -IPA:plimit=15000:small_pu=100 -HP:bdt=2m:heap=2m,limit=300 -march=bdver2 feedback = 0 464.h264ref=peak=default: COPTIMIZE = -O3 -OPT:unroll_size=256:unroll_times_max=2 -IPA:plimit=20000 -OPT:alias=disjoint -CG:ptr_load_use=0:local_sched_alg=1 -HP:bdt=2m:heap=2m -march=bdver1 471.omnetpp=peak=default: CXXOPTIMIZE = -Ofast -m32 -INLINE:aggressive=on -CG:cmp_peep=on -WOPT:sib=on -D__OPEN64_FAST_SET -march=bdver2 -mno-fma4 EXTRA_CXXLIBS = -L$(SMARTHEAP_DIR) -lsmartheap feedback = 0 473.astar=peak=default: CXXOPTIMIZE = -Ofast -WOPT:if_conv=0:sib=on -CG:divrem_opt=on:p2align=1:dsched=on -GRA:optimize_boundary=on -OPT:alias=disjoint -INLINE:aggressive=on -IPA:small_pu=3000:plimit=3000 -HP:bdt=2m:heap=2m -march=bdver1 483.xalancbmk=peak=default: CXXOPTIMIZE =-Ofast -LNO:prefetch=2 -OPT:unroll_size=512:unroll_times_max=8 -D__OPEN64_FAST_SET -INLINE:aggressive=on -m32 -CG:cmp_peep=on:local_sched=off:p2align=1 -GRA:unspill=on -TENV:frame_pointer=off -fno-emit-exceptions -march=bdver2 -mno-fma4 EXTRA_CXXLIBS = -L$(SMARTHEAP_DIR) -lsmartheap feedback = 0 ##################################################################### # FP Portability ##################################################################### 436.cactusADM=default=default: FPORTABILITY = -fno-second-underscore 447.dealII=peak=default: # Needed to avoid -DSPEC_CPU_LP64 since peak is built with -m32 PORTABILITY = 450.soplex=peak=default: # Needed to avoid -DSPEC_CPU_LP64 since peak is built with -m32 PORTABILITY = 481.wrf=default=default: PORTABILITY = -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 FPORTABILITY = -fno-second-underscore 482.sphinx3=peak=default: # Needed to avoid -DSPEC_CPU_LP64 since peak is built with -m32 PORTABILITY = ################################################################# # # # SPECfp Tuning # # # ################################################################# fp=base: COPTIMIZE = -Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000:small_pu=100 -mso -march=bdver1 CXXOPTIMIZE = -Ofast -static -CG:load_exe=0 -OPT:malloc_alg=1 -INLINE:aggressive=on -HP:bd=2m:heap=2m -D__OPEN64_FAST_SET -march=bdver1 FOPTIMIZE = -Ofast -LNO:blocking=off:simd_peel_align=on -OPT:rsqrt=2:unroll_size=256 -HP:bd=2m:heap=2m -mso -march=bdver1 sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit ##################################################################### # FP Peak Tuning ##################################################################### fp=peak=default: COPTIMIZE = -Ofast -HP:bdt=2m:heap=2m CXXOPTIMIZE = -Ofast -INLINE:aggressive=on -HP:bdt=2m:heap=2m -D__OPEN64_FAST_SET FOPTIMIZE = -Ofast -HP:bdt=2m:heap=2m PASS1_CFLAGS = -fb_create fbdata PASS2_CFLAGS = -fb_opt fbdata PASS1_CXXFLAGS = -fb_create fbdata PASS2_CXXFLAGS = -fb_opt fbdata PASS1_FFLAGS = -fb_create fbdata PASS2_FFLAGS = -fb_opt fbdata PASS1_LDFLAGS = -fb_create fbdata PASS2_LDFLAGS = -fb_opt fbdata 410.bwaves=peak=default: FOPTIMIZE = -Ofast -OPT:Ofast:treeheight=on -LNO:blocking=off:ignore_feedback=off:fu=4:loop_model_simd=on:simd_rm_unity_remainder=on -WOPT:aggstr=0 -HP:bdt=2m:heap=2m -CG:cmp_peep=on -march=bdver1 416.gamess=peak=default: FOPTIMIZE = -Ofast -LNO:fu=6:blocking=0:simd=2 -OPT:ro=3:recip=on -CG:local_sched_alg=1 -HP:bdt=2m:heap=2m -WOPT:sib=on -march=bdver1 433.milc=peak=default: COPTIMIZE = -Ofast -CG:movnti=1:locs_best=on -HP:bdt=2m:heap=2m -IPA:plimit=7000:callee_limit=1200 -OPT:struct_array_copy=2 -OPT:alias=field_sensitive -mso -march=bdver1 feedback = 0 434.zeusmp=peak=default: FOPTIMIZE = -Ofast -LNO:blocking=off:interchange=off -IPA:plimit=1500 -HP:bdt=2m:heap=2m -march=bdver1 435.gromacs=peak=default: FOPTIMIZE = -Ofast -OPT:rsqrt=2 -HP:bdt=2m:heap=2m -LNO:simd=3 -CG:local_sched_alg=2:load_exe=3 -GRA:unspill=on -march=bdver1 COPTIMIZE = -Ofast -OPT:rsqrt=2 -HP:bdt=2m:heap=2m -CG:local_sched_alg=2:load_exe=3 -GRA:unspill=on -march=bdver1 feedback = 0 436.cactusADM=peak=default: FOPTIMIZE = -Ofast -LNO:blocking=off:prefetch=2:pf2=0:prefetch_ahead=4 -HP -CG:locs_shallow_depth=1:load_exe=0:dsched=on -WOPT:sib=on -march=bdver1 COPTIMIZE = $(FOPTIMIZE) 437.leslie3d=peak=default: FOPTIMIZE = -Ofast -CG:pre_minreg_level=2 -LNO:simd=0:fusion=2 -HP:bdt=2m:heap=2m -mso -march=bdver1 feedback = 0 444.namd=peak=default: CXXOPTIMIZE = -Ofast -IPA:plimit=3000 -LNO:ignore_feedback=off -CG:local_sched_alg=0:load_exe=0 -OPT:unroll_size=256 -fno-exceptions -HP:bdt=2m:heap=2m -LNO:if_select_conv=1 -OPT:alias=disjoint -LNO:psimd_iso_unroll=ON -march=bdver1 feedback = 0 447.dealII=peak=default: CXXOPTIMIZE = -Ofast -D__OPEN64_FAST_SET -static -INLINE:aggressive=on -LNO:opt=1:simd=2 -fno-emit-exceptions -m32 -OPT:unroll_times_max=8:unroll_size=256:unroll_level=2 -HP:bdt=2m:heap=2m -GRA:unspill=on -CG:cmp_peep=on:movext_icmp=off -TENV:frame_pointer=off -march=bdver1 feedback = 0 450.soplex=peak=default: CXXOPTIMIZE = -O3 -LNO:ignore_feedback=off -INLINE:aggressive=on -OPT:RO=1:IEEE_arith=3:IEEE_NaN_Inf=off:fold_unsigned_relops=on -fno-exceptions -CG:p2align=0 -m32 -mno-fma4 -HP:bdt=2m:heap=2m -WOPT:sib=on -march=bdver1 453.povray=peak=default: CXXOPTIMIZE = -Ofast -CG:pre_local_sched=off:p2align=0:p2align_split=on:dsched=on -INLINE:aggressive=on -HP:bd=2m:heap=2m -OPT:transform=2:alias=disjoint -WOPT:aggcm=0 -march=bdver2 454.calculix=peak=default: FOPTIMIZE = -Ofast -OPT:unroll_size=256:alias=disjoint -GRA:optimize_boundary=on -CG:dsched=on -HP:bdt=2m:heap=2m -march=bdver1 COPTIMIZE = $(FOPTIMIZE) feedback = 0 -march=bdver1 459.GemsFDTD=peak=default: FOPTIMIZE = -Ofast -IPA:plimit=1500 -OPT:unroll_size=1024:unroll_times_max=16 -LNO:fission=2 -CG:local_sched_alg=2 -HP -march=bdver1 feedback = 0 465.tonto=peak=default: FOPTIMIZE = -Ofast -OPT:alias=no_f90_pointer_alias -LNO:blocking=off -CG:load_exe=1:local_sched_alg=3 -IPA:plimit=525 -HP:bdt=2m:heap=2m -march=bdver1 feedback = 0 470.lbm=peak=default: COPTIMIZE = -Ofast -CG:cmp_peep=on -OPT:keep_ext=on -HP:bdt=2m:heap=2m -IPA:plimit=8000:small_pu=100 -march=bdver1 -mso feedback = 0 481.wrf=peak=default: FOPTIMIZE = -Ofast -LNO:blocking=off -LANG:copyinout=off -IPA:callee_limit=5000 -GRA:prioritize_by_density=on -HP -WOPT:sib=on -march=bdver1 COPTIMIZE = $(FOPTIMIZE) feedback = 0 482.sphinx3=peak=default: COPTIMIZE = -Ofast -m32 -IPA:plimit=1000 -OPT:malloc_alg=2 -CG:cmp_peep=on:p2align=0:load_exe=1:dsched=on -INLINE:aggressive=on -LNO:prefetch=2:prefetch_ahead=4 -mso -march=bdver2 # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo-rev6818 -f -p' default: # Sysinfo program /root/work/cpu2006v1.2/Docs/sysinfo-rev6818 # $Rev: 6818 $ $Date:: 2012-07-17 #$ 5569a0425e2ad530534e4c79a46e4d28 # running on cpudelhi01 Fri Jun 21 17:45:16 2013 # # This section contains SUT (System Under Test) info as seen by # some common utilities. To remove or add to this section, see: # http://www.spec.org/cpu2006/Docs/config.html#sysinfo # # From /proc/cpuinfo # model name : AMD Opteron(tm) Processor 3365 # 1 "physical id"s (chips) # 8 "processors" # cores, siblings (Caution: counting these is hw and system dependent. The # following excerpts from /proc/cpuinfo might not be reliable. Use with # caution.) # cpu cores : 4 # siblings : 8 # physical 0: cores 0 1 2 3 4 5 6 7 # cache size : 2048 KB # # From /proc/meminfo # MemTotal: 32862016 kB # HugePages_Total: 3584 # Hugepagesize: 2048 kB # # /usr/bin/lsb_release -d # Red Hat Enterprise Linux Server release 6.3 (Santiago) # # From /etc/*release* /etc/*version* # redhat-release: Red Hat Enterprise Linux Server release 6.3 (Santiago) # system-release: Red Hat Enterprise Linux Server release 6.3 (Santiago) # system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server # # uname -a: # Linux cpudelhi01 2.6.32-279.el6.x86_64 #1 SMP Wed Jun 13 18:24:36 EDT 2012 # x86_64 x86_64 x86_64 GNU/Linux # # run-level 3 Jun 21 17:34 # # SPEC is set to: /root/work/cpu2006v1.2 # Filesystem Type Size Used Avail Use% Mounted on # /dev/sda2 ext3 398G 8.8G 369G 3% /root/work # # Additional information from dmidecode: # BIOS MICRO-STAR INTERNATIONAL CO., LTD 080016 09/20/2012 # Memory: # 4x 8 GB # 4x Micron 18JSF1G72AZ-1G6D1 8 GB 800 MHz 2 rank # # (End of data from sysinfo program) # hw_cpu_name = AMD Opteron 3365 # hw_disk = 398 GB add more disk info here # hw_memory001 = 31.340 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 1 # prepared_by = root (is never output, only tags rawfile) # sw_file = ext3 # sw_os001 = Red Hat Enterprise Linux Server release 6.3 (Santiago) # sw_os002 = 2.6.32-279.el6.x86_64 # sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 471.omnetpp: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 462.libquantum: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =HUGETLB_LIMIT = "480" notes_010 =LD_LIBRARY_PATH = "/root/work/cpu2006v1.2/amd1206-rate-libs-revA/32:/root/work/cpu2006v1.2/amd1206-rate-libs-revA/64" notes_015 = notes_plat_000 = notes_plat_005 =A standard ATX case is required, along with a 350W notes_plat_010 =(minimum) ATX power supply [8-pin (+12V) and 24-pin are required]. notes_plat_015 = notes_plat_020 =As Tested, the system used an Antec Sonata II ATX case, notes_plat_025 =an Antec 750W power supply, Lite-On SATA DVD-ROM Drive, notes_plat_030 =a Western Digital 500GB SATA hard disk (Part: WD5000ABPS) notes_plat_035 =and a retail box CPU heatsink and fan assembly. notes_plat_040 =